• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.26-39
• /
• 2000

This paper presents the influence of Reynolds number on propeller open-water performance at the towing tank and the cavitation tunnel for series propellers(No. of blade=4, $0.3{\leq}A_E/A_O{\leq}0.75,\;0.5{\leq}P/D{\leq}1.1$). It is shown that the Reynolds number recommanded by 15th and 17th ITTC is not large enough to obtain reliable P.O.W. test results and then the suitable test conditions for the both facilities is suggested. The correlation of the propeller open-water characteristics at the cavitation tunnel and the towing tank is described and a correlation factor $\kappa$ is deduced from those test results. The viscous effect of the flow around the propeller shaft on the propeller characteristics is investigated from the velocity measurement by Laser Doppler Velocitimetry(L.D.V.). The measured velocity distribution shows that viscous flow effect is not negligible.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.274-280
• /
• 2000

To analyze the resistance of the bottom trawl which is composed with 6 seams net, the field experiment was carried out on the sea near Kokunsan Is., western sea of Korea. The resistance was respectively measured in the otter board and the net according to the change of warp length and towing speed. The results obtained are summarized as follows : 1. Total resistance of the test trawl gear are slightly increased according to the length of warp. 2. The resistance of net is increasing a little according to the length of warp, but it is expressed. $$ R_n/=10 \frac{d}{\ell}$representatively. 3. The resistance of otter board can be expressed $Rb=1810_{\upsilon}^0.8.$ 4. Comparing with the value of measuring resistance and Koyama formula resistance by the length of warp respectively, the resistance of test trawl gear is high in the slow towing speed, and the resistance of Koyama formula is high in the fast towing speed, and that the cross-point of the both line between the resistance of the test net and Koyama formula is moved to high according to the increment of warp length.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.134-140
• /
• 2011

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Waterline angle has been chosen as a main parameter for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of waterline angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.55-59
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge have been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore it is difficult to get the safety if tug-barge operation. In this study, we propose the basic method to develope the safety towing system for barge using portable GPS which is easily movable and relatively inexpensive. Then we have conducted the test on the real barge and discuss the results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.5
• /
• pp.596-608
• /
• 2018

The present study aims to assess test uncertainty assessment method of nominal wake field measurement by a Stereoscopic Particle Image Velocimetry (SPIV) system in a towing tank. The systematic uncertainty of the SPIV system was estimated from repeated uniform flow measurements. In the uniform flow measurement case, time interval between image frames and uniform flow speed were varied to examine the effects of particle displacement and flow around the SPIV system on the systematic standard uncertainty. The random standard uncertainty was assessed by repeating nominal wake field measurements and the estimated random standard uncertainty was compared with that of laser Doppler velocimetry. The test uncertainty assessment method was applied to nominal wake measurement tests of a very large crude oil carrier model ship. The nominal wake measurement results were compared with existing experimental database by other measurement methods, with its assessed uncertainty.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.350-358
• /
• 2010

The present paper deals with the comparative study of resistance performance with refrigerated ice and synthetic ice according to the variation of hull form characteristics. The resistance test has been conducted in pack ice condition in each concentration condition. Stem angle has been chosen as main parameters for the variation of hull form characteristics. The correlation of performance between with the refrigerated ice and with the synthetic ice has been shown according to the variation for stem angles. The present study show the possibility of ice test in general towing tank with synthetic ice for the time-consuming research such as hull form optimization although that is confined in pack ice condition. The more parametric study for the properties of synthetic ice is expected to be conducted to have more close correspondence for the test results of refrigerated ice in near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.303-307
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge has been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore, it is difficult to get the safety of tug-barge operation. It is necessary for the captain of tug boat, VTS and operation department to develope the system which can keep observing the course, speed and position of the towed barge in actual sea and prevent the marine accidents in advance. In this study, we proposed the basic method to develope the safety towing system for barge using portable GPS which was easily movable and relatively inexpensive. Then we conducted the test on the real barge. As a result, we could obtain diverse navigation data to make a safety towing work. It was noted that these data could be used for carious purposes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.404-413
• /
• 2013

In the present study, a towed underwater particle image velocimetry (PIV) system was validated in uniform flow and used to investigate the free-surface effects on the turbulent wake of a simple surface-piercing body. The selected test model was a cylindrical geometry formed by extruding the Wigley hull's waterplane shape in the vertical direction. Due to the constraints of the two-dimensional (2D) PIV system used for the present study, the velocity field measurements were done separately for the vertical and horizontal planes. Using the measured data at several different locations, it was possible to identify the free-surface effects on the turbulent wake in terms of the mean velocity components and turbulence quantities. In order to provide an accuracy level of the data, uncertainty assessment was done following the International Towing Tank Conference standard procedure.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.5 no.2
• /
• pp.51-52
• /
• 1968

The effect of trim on the form factor K was investigated by the towing tank test using a 4 ft. Mariner model. The effect is considerably small. The results are shown in Fig.1.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.876-893
• /
• 2014

The resistance performance of an icebreaking cargo vessel according to the variation of waterline angles is investigated numerically and experimentally. A recently developed Finite Element (FE) model is used in our analysis. A resistance test with synthetic ice is performed in the towing tank at Pusan National University (PNU) to compare and validate the computed results. We demonstrate good agreement between the experimental and numerical results. Shipice interaction loads are numerically calculated based on the Fluid Structure Interaction (FSI) method in the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the PNU towing tank are used to compare and validate the numerical simulations. For each waterline angle, numerical and experimental comparisons were made for three concentrations (90%, 80%, and 60%) of pack ice. Ice was modeled as a rigid body, but the ice density was the same as that used in the experiments. A comparative study according to the variation of stem angles is expected to be conducted in the near future.