DOI QR코드

DOI QR Code

Comparative study on the resistance performance of an icebreaking cargo vessel according to the variation of waterline angles in pack ice conditions

  • Kim, Moon-Chan (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Lee, Won-Joon (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Shin, Yong-Jin (Department of Naval Architecture & Ocean Engineering, Pusan National University)
  • Published : 2014.12.31

Abstract

The resistance performance of an icebreaking cargo vessel according to the variation of waterline angles is investigated numerically and experimentally. A recently developed Finite Element (FE) model is used in our analysis. A resistance test with synthetic ice is performed in the towing tank at Pusan National University (PNU) to compare and validate the computed results. We demonstrate good agreement between the experimental and numerical results. Shipice interaction loads are numerically calculated based on the Fluid Structure Interaction (FSI) method in the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the PNU towing tank are used to compare and validate the numerical simulations. For each waterline angle, numerical and experimental comparisons were made for three concentrations (90%, 80%, and 60%) of pack ice. Ice was modeled as a rigid body, but the ice density was the same as that used in the experiments. A comparative study according to the variation of stem angles is expected to be conducted in the near future.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. Aboulazm, A.F., 1989. Ship resistance in ice flow covered waters. Ph.D thesis. Memorial Universty of Newfoundl and Canada.
  2. Gagnon, R.E. and Wang, J.Y., 2012. Numerical simulations of a tanker collision with a bergy bit incorporating hydrodynamics, a validated ice model and damage to the vessel. Cold Regions Science and Technology, 81, pp.26-35. https://doi.org/10.1016/j.coldregions.2012.04.006
  3. Kwok, R. and Cunningham, G.F., 2011. Deformation of the Arctic Ocean ice cover after the 2007 record minimum in summerice extent. Cold Regions Science and Technology, 76-77, pp.17-23.
  4. Kim, M.C., Lee, S.K., Lee, W.J. and Wang, J.Y., 2013. Numerical and experimental investigation of the resistance performance of an ice breaking cargo vessel in pack ice condition. International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.116-131. https://doi.org/10.3744/JNAOE.2013.5.1.116
  5. Kim, M.C., Lim, T.W., Jo, J.C., Chun, H.H. and Wang, J.Y., 2009. Comparison study on the propulsion performance for icebreaker with synthetic ice and refrigerated ice. Journal of Ocean Engineering and Technology, 23(1), pp.129-134.
  6. LS-DYNA, 2006. Theoretical manual. U.S.A.: Livermore Software Technology Corporation.
  7. Raed, L. and Sveinung, L., 2011. A numerical model for real-time simulation of ship-ice interaction. Cold Regions Science and Technology, 65(2), pp.111-127 https://doi.org/10.1016/j.coldregions.2010.09.004
  8. Song, Y.Y., Kim, M.C. and Chun, H.H., 2007. A study on resistance test of icebreaker with synthetic ice. Journal of the Society of Naval Architectures of Korea, 44(4), pp.389-397 https://doi.org/10.3744/SNAK.2007.44.4.389
  9. Valanto, P., 2001. The resistance of ships in level ice. Society of Naval Architects and Marine Engineers, 109, pp.53-83.
  10. Wang, J.Y. and Derradji, A., 2010. Ship performance in broken ice floes - preliminary numerical simulations, institute for ocean technology, Report No. TR-2010-24. NL, Canada: National Research Council, St. John's.
  11. Wang, J.Y. and Derradji, A., 2011. Numerical assessment for stationary structure (Kulluk) in moving broken ice. Proceedings of the 21st International Conference, Port and Ocean Engineering under Arctic Conditions, Montreal, Canada, 10-14 July 2011.