• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.242-243
• /
• 2014

본 연구는 윈도우 커버 뒷면에 2층 구조의 전극으로 각 전극들의 상호 정전용량을 이용한 터치스크린 패널을 개발하였다. 정전용량 방식의 터치스크린패널(Touch Screen Panel; TSP)은 필름을 사용하는 저항막 방식에 비해 내구성이 좋아 작은 손상에도 동작에 지장이 없다. 또한, 터치의 정확도가 높고, 광학적 특성이 우수하며 다중 포인트가 가능하다. 윈도우 일체형 TSP는 박막증착을 통해 X축,Y축 방향의 전극 패턴을 형성하였고 전극 교차부는 포토리소그래피공정을 통해 절연막 형성 및 Bridge, Bezel 전극을 형성하여 TSP를 제조 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.575-579
• /
• 2016

The metal mesh films with thickness of 1.0, 1.5, $2.0{\mu}m$ were prepared by photolithography using Ag, Al, and Cu metals. Every metal films were showed C(111) preferred orientation and Ag showed the lowest resistivity and followed by Al and Cu. The transmittance of almost films were higher than 90%. But, the Ag film with thickness of $2.0{\mu}m$ was delaminated during photolithography process due to low adhesion. So, Cu and Ti metal films were introduced under Ag film to improve adhesion property. The Cu film showed higher adhesion properties compared to Ti film. Furthermore, the Ti films that deposited on Ag film showed higher acid resistance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.474-475
• /
• 2009

As a substitute of ITO material, carbon nanotube (CNT) is widely studied for transparent conductive film (TCF). Current sheet resistance of CNT-TCF is about 100 ${\Omega}$/sq at 80% transmittance. But CNT-TCF performance in manufacturable level is about 500 ${\Omega}$/sq at 83% based on the Topnanosys Co's result. Therefore, critical issue in CNT-TCF research is to reduce the sheet resistance with manufacturing reliability. In this report, recent developments using CNT-TCF are introduced. Touch panel, transparent LED signboard, transparent speaker and transparent heater are representative examples. Also I describe the future issues and prospect of CNT-TCF for the flexible display.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1531-1534
• /
• 2009

Effect of process factors on the sensitivity of inner-type digital switching TSP was analyzed. From these results, we have successfully fabricated inner-type digital switching TSP embedded in 3.2-inch WQVGA PLS mode LCD panel. During many factors, TFT sensor structure for reducing the PI thickness and a separation distance of $0.3{\mu}m$ between the conductive column spacer (C/S) and TFT sensor were essential. Glass thickness and main C/S density were also important factors. This technology can be applied to wide angle of view hand-held phones, personal digital assistants (PDAs), and tablet PCs.

• Journal of Broadcast Engineering
• /
• v.20 no.4
• /
• pp.568-579
• /
• 2015

Recently, mobile devices with touch display panel are widely used. Accuracy and reaction speed of touch signal are very important in touch devices. Therefore, we need to develop an effective algorithm to reduce touch noise quickly and accurately. This paper proposes a touch noise reduction algorithm using Kalman filtering in consideration of signal motion. First, a specific pre-emphasis processing is applied to an input signal so as to maximize the effect of Kalman filtering. In other words, a pure signal in the touch signal increases but noise in the touch signal decreases. Next, motion of the signal is detected. Motion estimation is performed only if motion is detected. If we detect motion by using the only neighborhood of the signal, we can reduce about 75% of the computation in comparison with examining the entire area. Finally, Kalman filtering using the previous state of current signal is performed. Experimental results show that the proposed algorithm suppresses touch noise sufficiently without degradation of the pure signal

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.55-60
• /
• 2017

This paper is proposed on the transmit Method Finger-Printer Scanning of Mutual Capacitance Touch Screen Panel Using Differential Pulse for improving the security of computer information. This system is composed of differential pulse generator and Ring-Counter, also Supply voltage is 5V. this system generates the Pulse wave which is composed of In-Phase and Out of Phase at 1MHz while period of 2m/s. it is designed and be able to operate four channels. overall power consumption is approximately 78.08nW. This prototype is implemented in 0.25um CMOS Process and Chip area is $870um{\times}880um$.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.508-513
• /
• 2015

A capacitive-type touch screen panel (TSP) composed of silver nanowire (AgNW) crossing electrodes and transparent bridge structures was fabricated on a polycarbonate film. The transparent bridge structure was formed with a stack of Al-doped ZnO (AZO) electrodes and SU-8 insulator. The stable and robust continuity of the bridge electrode over the bridge insulator was achieved by making the side-wall slope of the bridge insulator low and depositing the conformal AZO film with atomic layer deposition. With an extended exposure time of photolithography, the lower part of the SU-8 layer around the region uncovered by the photomask can be exposed enough to the UV light scattered from the substrate. This leads to the low side-wall slope of the bridge insulator. The fabricated TSP sample showed a large capacitance change of 22.71% between with and without touching. Our work supplies the technological clue for ensuring long-term reliability to the highly flexible and transparent TSP made by using conventional fabrication processes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.168-174
• /
• 2016

A conductive oxide-based sapphire glass indium tin oxide/metal electrode and the optical coating, through patterning process was studied in excellent optical properties and integrated touch panel has a high strength. Indium tin oxide conductive oxides of the sapphire glass to 0.3 A at DC magnetron sputtering method of 10 min, gas flow Ar 10 Sccm Ar, $O_2$ 1.0 Sccm the formation conditions of the thin film after annealing at $550^{\circ}C$ for 30min was achieved through a 86% transmittance. In addition, the coating 130 nm hollow silica sol-gel was to improve the optical transmittance of the indium tin oxide to 91%. For the measurement by the modeling hollow silica sol by Macleod simulation and calculated the average values of silica part to the presence or absence in analogy to actual. Refractive index value and the actual value of the material on the simulation the transmittance difference is it does not completely match the air region similar to the actual value (transmission) could be confirmed that the measurement is set to a value of between 5 nm and 10 nm.

• Clean Technology
• /
• v.18 no.3
• /
• pp.301-306
• /
• 2012

Rapidly growing mobile machines such as tablet PC and smart phone are equipped with touch screen panel using a sturdy material for products surface protection. Therefore, surge of chemically strengthened glass was increased and the amount of waste matter is proportional to demand. The purpose of this study is environmental impact assessment on touch screen panel of chemically strengthened glass by material life cycle assessment (MLCA). We used CES of Granta, SimaPro and Gabi software for MLCA. Chemically strengthened glass (2.7, 5.7 and 10.3 inch) was calculated to environmental impact assessment by Granta software under two cases. One case is Landfill and the other case is Reuse. As a result, in case of reuse, energy values of 2.7, 5.7 and 10.3 inches were reduced by an average of 51.4%, $CO_2$ values were reduced by an average of 46.6% than Landfill case, respectively. We assessed impact categories of 11 types using SimaPro software. As a result, the contents of fossil fuels, inorganics and climate change have a huge impact than the other impact categories. And the main cause of environmental impact is antimony and hydrogen fluoride in Gabi results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2334-2339
• /
• 2009

In case of an embedded system having an LCD panel with touch-screen capability, various figures such as rectangles, pentagons, circles, and arrows are frequently used for the delivery of user-input commands. In such a case, it is necessary to have an algorithm that can recognize whether a touched location is within a figure on which a specific user-input command is assigned. Such algorithms, however, impose a considerable amount of overhead for embedded systems with restricted amount of computing resources. This paper first describes a method for initializing and driving a touch-screen LCD and a coordinate-calibration method that converts touch-screen coordinates into LCD panel coordinates. Then it introduces methods that can be used for recognizing touched areas of rectangles, many-sided figures like pentagons, and circles; they are a range checking method for rectangles, a crossing number checking method for many-sided figures, a distance measurement method for circles, and a color comparison method that can be applied to all figures. In order to evaluate the performance of these methods, we implement two-dimensional graphics functions for drawing figures like triangles, rectangles, circles, and images. Then, we draw such figures and measures times spent for the touched-area recognition of these figures. Measurements show that the range checking is the most suitable method for rectangles, the distance measurement for circles, and the color comparison for many-sided figures and images.