• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.493-498
• /
• 2012

Objective: The purpose of this study is to suggest the hierarchical structure with three layers of input task, input interaction, and input device. Background: Understanding the input interaction is very helpful to design an interface design. Method: We made a model of three layered input structure based on empirical approach and applied to a gesture interaction in TV. Result: We categorized the input tasks into six elementary tasks which are select, position, orient, text, and quantify. The five interactions described in this paper could accomplish the full range of input interaction, although the criteria for classification were not consistent. We analyzed the Microsoft kinect with this structure. Conclusion: The input interactions of command, 4 way, cursor, touch, and intelligence are basic interaction structure to understanding input system. Application: It is expected the model can be used to design a new input interaction and user interface.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.722-728
• /
• 2010

This paper presents the design and fabrication model of a touchpad based on a contact-resistance-type force sensor. The touchpad works as a touch input device, which can sense contact location and contact force simultaneously. The touchpad is 40 mm wide and 40 mm long. The touchpad is fabricated by using a simple screen printing technique. The contact location is evaluated by the calibration setup, which has a load cell and three-axis stages. The location error is approximately 4 mm with respect to x-axis and y-axis directions. The force response of the fabricated touchpad is obtained at three points by loading and unloading of the probe. The touchpad can detect loads from 0 N to 2 N. The touchpad shows a hysteresis error rate of about 11% and uniformity error rate of about 3%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.153.4-153
• /
• 2001

Skilled typists can type characters or wrds without looking at keyboard, relying on the finger´s relative position. If the relative positions of the fingers can be identified, a virtual keyboard may be accomplished by applying the concept of "DataGlove" or "FingerRing". The virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. For the purpose of investigating skilled typing pattern, in this paper the touch-positions of the fingers are measured with a touchscreen while four skilled typists type a long sentence. From these measurements it can be observed that the groups of touch-positions are classified into alphabet characters. Though there are some overlapped groups we can find constant distances capable of being discriminated ...

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.85-94
• /
• 2012

In this paper, we develop the new gestures of screen control with fingers on the FTIR multi touch table. It also describes recognition of mobile devices on the table using infrared camera. The FTIR multi touch table was incovenient to the existiog Bluetooth connection, because it is not provided with an HID(Human Input Device) interface. The proposed data transmission method using mobile device is to relieve the inconvenience of the data transfer and proceed more effectively. The new gestures and data transmission method is verified by FTIR multi touch table that is implemented for testing.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.242-247
• /
• 2014

The advancement of touch user interface technology is mostly due to the debut and success of the new user experience (UX), the iPhone. The introduction of Apple's iPhone especially made possible for the user experience to break away from the traditional input device of the mouse and keyboard. It is advancing from the current 3rd generation touch interface technology into the 4th generation non-touch user interface technology. This paper will present a non-touch interaction technology that allows interaction in a three dimensional setting through 3-D space touch. It will analyze current technologies and future emerging technologies.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.1018-1023
• /
• 2012

Smartphone is integrated into the daily lives of all types of people not even young generation. A touch screen display is a primary input device of a smart phone, a tablet computer, etc. While there are many tough technologies in existence, resistive and capacitive are dominant and currently lead the touch screen panel industry. And a capacitive touch screen panel widely used in smart phones is coated with a material that stores electrical charges. In this study, we tried to manufacture gloves produced with electro-conducting leather as a tool to operate a touch panel screen. Therefore, electrically conductive materials, Polyaniline(PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), and Carbon nanotubes (CNT) were applied to the surface of leather to be used as a touching operator for capacitive touch screen panel. The leather samples were treated by simple painting method; firstly, they were painted with aqueous solution containing each of the electrically conductive materials and then dried. This cycle was repeated three times. Consequently, the treated leather samples showed electrical conductivity and reasonable working performance to the capacitive touch screen. And, PANI showed the best performance and highest electrical conductivity, and then PEDOT and, CNT in decreasing order. This is because the solubilities of PANI and PEDOT show higher than dispersibility of CNT. Thus, the concentration of conducting polymers was greater than that of CNT in the treating solutions.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.4
• /
• pp.47-60
• /
• 2011

With the increase in the use of mobile banking service, mobile banking has become an attractive target to attackers. Even though many security measures are applied to the current mobile banking service, some threats such as physical theft or penetration to a mobile device from remote side are still remained as unsolved. With aiming to fill this void, we propose a novel approach to prevent e-financial incidents by analyzing mobile device user's input patterns. This approach helps us to distinguish between original user's usage and attacker's usage through analyzing personal input patterns such as input time-interval, finger pressure level on the touch screen. Our proposed method shows high accuracy, and is effective to prevent the e-finance incidents proactively.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.1-13
• /
• 2011

The recent spotlight on electronic touch-screen display, a rapid breakthrough in the information society is evolving. Touch panel input device such as a keyboard or mouse without the use of, the on-screen character or a specific location or object on the person's hand touches a particular feature to identify the location of a panel is to be handled. The touch screen on the touch panel is used in the Ag paste is used mostly for low-curable paste. The thermal-curing paste according to the drying process of thermal energy consumption and improve the working environment of organic solvents have problems. In this study, Ag paste used in the non-thermal curing friendly and cost-effective UV curable paste was prepared. Current commercially available thermal-curable binder, was used instead of the flow characteristics of UV-curable oligomers and monomers with functional groups to give a single conductive Ag paste with the addition of a pattern could be formed. Ag paste as a result, thermal-curing adhesive, hardness, resistance and excellent reproduction of fine patterns and was available with screen printing environmentally friendly could see its potential as a patterning technology.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.137-145
• /
• 2013

Recently most mobile devices have soft keyboards on their LCD touch screens. Because of the tiny size of the touch screen of the soft keyboard, adjacent keys are mistakenly typed. Also utilizing a key for multiple key inputs causes key type errors. In this paper, we proposed an algorithm to recommend proper words to the user while the user continues to type keys, which helps to easily correct key type errors. In addition, we presented a soft keyboard called MissLess which implemented the recommendation algorithm. We evaluated recommendation performance of MissLess keyboard through experiments by using 3 test sets. The test results showed that the success ratio of recommendation reached up to about 90% although there were some differences between results. However it is needed to be considered that we recommended 4 words for an input word in this experiments.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.127-132
• /
• 2020

The Smart Music Learning Device(SMLD) presented in this paper constructs the display part by attaching the touch panel to both sides of the transparent panel. The main processing unit uses raspberry pie, and the operating system uses Android. On the transparent panel, music education contents are displayed, and on the touch panels 1 and 2, the inputs of learners and instructors are accepted. The signal input from the touch panels 1 and 2 controls the progress of the music education contents through a process in the main processing unit. This control process design and implement a two - sided panel - based interactive training algorithm. This device aims at musical education based on mutual understanding. Therefore, it conducts face-to-face education using music education contents presented through transparent panel. This allows the instructor to know in real time the response to the learner, thus improving the understanding of the learning and the quality of the education. Also, the learner's concentration can be improved.