• 기술혁신연구
• /
• 제13권2호
• /
• pp.207-222
• /
• 2005

A prerequisite for making R&D more productive is to able to measure its productivity. Most of the previous studies on this topic have attempted to measure R&D productivity at the firm or industry levels. In this study, however, R&D productivity is measured at the national level to provide R&D policy implications, particularly for Asian countries. Contrary to the previous studies where total factor productivity was adopted, this study employs the data envelopment analysis (DEA) approach to measure R&D productivity. DEA is a multi-factor productivity analysis model for measuring the relative efficiency of each Decision Making Unit (DMU). In addition to the basic DEA model that includes all inputs and outputs, five additional models are constructed by combining single input with all outputs and single output with all inputs in order to measure specialized R&D efficiency. In this study, the twenty-seven countries are classified into four clusters based on the output-specialized R&D efficiency: inventors, merchandisers, academicians, and duds. Then, the characteristics of the Asian countries with respect to R&D efficiency are identified. It is found that Singapore ranks high in total efficiency, and Japan in patent-oriented efficiency. Meanwhile, China, Korea, and Taiwan are found to be relatively inefficient in R&D. We expect that the findings from this study will be able to provide directions for R&D policy-making of the Asian countries.

• 환경위생공학
• /
• 제5권1호
• /
• pp.83-92
• /
• 1990

Adapting two step aeration system to a waste water treatment of W-paper manufactory as Full-Scale Plants, we drew a following conclusion from its practical working. 1. Because BOD removal efficiency was 20% in A-Stage, 90% in B-Stage and total removal efficiency was 97%. It worked treatment plant well and was suitable for effluent water standard as well. Because COD removal efficiency was 42% in A-stage, 71% in B-stage and the total removal efficiency was 94% COD control was possible in effluent water quality. 2. Treatment efficiency according to a load capacity was average 20% in 1.401 BOD kg/m3/d load of A-Stage and average 90% in 0.273 BOD kg/$\textrm {m}^3$ / d load of B-Stage. 3. Treatment efficiency according to a ratio of F/M was 2.657--5.024 kg BOD/kg MLSS/d in A-Stage and BOD removal efficiency was 16-261 in the same stage. The ratio of F/M was 0.068-0.094 kg BOD /kg MLSS/d and BOD removal efficiency ratio was 85-94%. Therefore treatment efficiency could be kept stably and volume of aeration tank could be reduced wholly. 4. Treatment efficiency according to MLSS appeared BOD 20%. COD 42%, in A-Stage and removal efficiency appeared BOD 90%, COD 71% in B-Stage. They were suitable for plan condition. 5. Because of working of complemented treatment plant by AB-Process. 20,000,000 Won a month was saved than the ordinary working cost. Therefore, it was assumed that invested cost could be recollected in 19 months or so consequently.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.397-402
• /
• 2013

This paper proposes a new passive type LED driver which satisfies the standard of power factor (PF) and total harmonic distortion (THD). The proposed passive LED driver also has high-efficiency and long-life time characteristics compared to active LED driver which is composed of op-amp, switches and so on. By using just passive components such as inductor, capacitor, and diode, it has resolved extremely short-life time and low-efficiency problems of previous LED drivers. It has achieved PF of 0.99, THD of 16.4 %, and the total efficiency of 95 %. The proposed passive LED driver is fully analyzed and verified by simulations and experiments, which results are in good agreement each other.

• 설비공학논문집
• /
• 제17권10호
• /
• pp.891-897
• /
• 2005

The characteristics of energy Performance for total heat exchanger have been investigated under various conditions. In cooling operation the latent and enthalpy efficiency are affected by the difference of absolute humidity ratio between indoor and outdoor air. In addition to this the characteristics of absorbing material in the element affects the energy performance. Low dry bulb temperature of indoor air or high absolute humidity ratio in outdoor air give high latent and enthalpy efficiency even with the same temperature difference of dry bulb temperate between indoor and outdoor air.

• 대한가정학회지
• /
• 제30권2호
• /
• pp.61-71
• /
• 1992

This study was designed to evaluate the anti hypercholesterolemic effect in either soybean oil or lard containing hypercholesterol diet in rats. Rats were fed, ad libitum, for 5 weeks with diets containing 0, 5, 10% of L.edodes in either soybean oil or lard with 1% exogenous cholesterol. Forty-two male sprague-dawley rats weighing 71.6$\pm$8.1g were divided into 6 groups. The results of this study were summairzed as follows: 1. Weight gain, total feed intake, feed intake efficiency ratio, total calorie intake and calorie efficiency ratio during five weeks showed significant difference among groups. The lowest value was found in soybean oil ＋ L.edodes-free group and the highest value was found in lard ＋ L.edodes-free group. The weight of organs were significantly higher in lard groups than soybean oil groups. 2. The contents of serum triglyceride showed significant difference kinds of lipids. It tended to be lower soybean oil groups than lard groups. It was difference with dietary L.edodes levels in soybean oil groups. The contents of total serum cholesterol showed significant difference by kinds of lipids, it was lower soybean oil groups than lard groups. But it was not differ with dietary L.edodes levels in soybean oil groups. 3. The contents of total liver cholesterol showed no difference kinds of lipids. And it was lower in soybean oil groups than lard groups. This result showed that the soybean oil decreased the contents of total liver cholesterol.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.541-549
• /
• 2014

The monthly-average meteorological data, in particular, the monthly average daily terrestrial horizontal insolation are required for designing solar thermal energy systems. In this paper, the dynamic thermal performance of a flat plate solar collector system is numerically investigated through a year from the monthly average insolation data in Seoul. For a specified data set of solar collector system, the dynamic behaviors of total solar radiation on the tilted collector surfaces, heat loss from the collector system, useful energy and collector efficiency are analyzed from January to December by a mathematical simulation model. In addition, the monthly average daily total solar radiation, useful energy, and daily collector efficiencies through a year are estimated. The simulated results show that the average total radiation is highest in March and the useful energy is highest in October, while the total radiation and the collector efficiency are lowest in July.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.121-128
• /
• 2012

Improvement in the energy efficiency has been studied of the desiccant cooling system by applying a vapor compression type heat pump to modify the system into a hybrid system. The cycle simulation was performed and the results were compared between a reference desiccant cooling system composed of a desiccant rotor, a sensible rotor and a regenerative evaporative cooler, and a hybrid desiccant cooling system with the sensible rotor being replaced by a heat pump. Though the electric consumption increases as much as the compressor power consumption, the total cooling capacity increases and the thermal energy input decreases by the addition of the heat pump. Therefore, the total energy efficiency can be improved if the increase in the electric consumption can be compensated with the increase in the cooling capacity and the decrease in the thermal energy input. The results showed that the total energy efficiency is optimized at a certain heat pump capacity. When the heat from the CHP plant is used for the thermal energy input, the energy consumption of the hybrid system is reduced by 20~30% compared with the reference system when the heat pump shares 30~40% of the total cooling capacity.

• 환경영향평가
• /
• 제23권1호
• /
• pp.67-74
• /
• 2014

The aim of this study was evaluated the effects of total rainfall, rainfall intensity and antecedent dry days and identify the correlation analysis with the EMC removal efficiency, in order to provide an understanding of the operation and maintenance factors of constructed wetland in flood pumping station. This study was conducted total of 20 monitoring in a catchment(326.2 ha) of constructed wetland in Ga-un flood pumping station located at the downstream of the Wang-suk stream. The determined EMC removal efficiencies were $36.04{\pm}9.45%$ for BOD, $38.50{\pm}13.50%$ for $COD_{Mn}$, $34.34{\pm}13.05%$ for TN and $34.22{\pm}14.27%$ for TP, respectively. These results showed that the pollutants concentration and EMC were reduced while passing through the constructed wetland. In the correlation analysis, the highly correlations with EMC removal efficiency of BOD and $COD_{Mn}$ were observed for total rainfall and rainfall intensity (P<0.05). However, the correlations were not found with TN and TP for rainfall variables.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.75-82
• /
• 2019

In a highly urbanized area, land availability is limited for the installation of space consuming stormwater systems for best management practices (BMPs), leading to the consideration of underground stormwater treatment devices connected to the stormwater pipe system. The configuration of a stormwater pipe network determines the hydrological and pollutant transport characteristics of the stormwater discharged through the pipe network, and thus should be an important design consideration for effective management of stormwater quantity and quality. This article presents a multi-objective optimization approach for designing a stormwater pipe network with on-line stormwater treatment devices to achieve an optimal trade-off between the total installation cost and the annual removal efficiency of total suspended solids (TSS). The Non-dominated Sorted Genetic Algorithm-II (NSGA-II) was adapted to solve the multi-objective optimization problem. The study site used to demonstrate the developed approach was a commercial area that has an existing pipe network with eight outfalls into an adjacent stream in Yongin City, South Korea. The stormwater management model (SWMM) was calibrated based on the data obtained from a subcatchment within the study area and was further used to simulate the flow rates and TSS discharge rates through a given pipe network for the entire study area. In the simulation, an underground stormwater treatment device was assumed to be installed at each outfall and sized proportional to the average flow rate at the outfall. The total installation cost for the pipes and underground devices was estimated based on empirical formulas using the flow rates and TSS discharge rates simulated by the SWMM. In the demonstration example, the installation cost could be reduced by up to 9% while the annual TSS removal efficiency could be increased by 4% compared to the original pipe network configuration. The annual TSS removal efficiency was relatively insensitive to the total installation cost in the Pareto-optimal solutions of the pipe network design. The results suggested that the installation cost of the pipes and stormwater treatment devices can be substantially reduced without significantly compromising the pollutant removal efficiency when the pipe network is optimally designed.

• 보건의료산업학회지
• /
• 제10권3호
• /
• pp.1-12
• /
• 2016

Objectives : This study examined relations between investment efficiency and management performance as indexes related to productivity of Korean regional public hospitals. Methods : The analysis data are financial information of Korean regional public hospitals from 2011 to 2014. For the indicators, value added to total assets, value added to productive activity tangible fixed assets, and value added to personnel expenses, operating margin to revenues, net profit to total earnings, and ratio of value added. Results : Significant relevance was not shown among indicators of investment efficiency. However, Significant relevance was shown between value added to personnel expense and productivity per value added. Conclusions : It confirmed that outside support funds like subsidy did not have effect on improving the management performance. Also, it could be known that availability about input of capital and labor was not realized organically.