• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.35-36
• /
• 2017

The finish works of construction projects comprises approximately 40% of the total construction duration. Thus, the management of finish works have as big as impacts on total project duration as the earthworks, foundation and structure works. Process interference management is considered one of the most important issues dealt during finish works. However, it was investigated that effective management systems have yet not been applied for practical use. Accordingly, this paper suggests a mobile technology based finish works management system that mainly focuses on preventing process interference occurred due to ineffective communication between general and sub-contractors.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.291-302
• /
• 2021

The phytoplankton community in the estuarine system is affected by changes of physicochemical factors easily. The present study analyzed phytoplankton community distribution and similarity, in addition to exploring factors influencing variations in phytoplankton community structure in three lakes located in the Yeongsan River estuary from March 2014 to November 2017. We carried out non-multidimensional scaling (NMDS) and random forest analysis (RF) for comparing the pattern of phytoplankton distribution and the relationship between phytoplankton distribution and environmental variables. Similarity Percentage (SIMPER) and Analysis of Similarity (ANOSIM) were performed to figure out the similarity of phytoplankton community at each site of three lakes. From NMDS, Phytoplankton community distribution differed between Yeongsan and Gumho lakes, and the factors influencing the distribution of phytoplankton communities across the three lakes were water temperature, dissolved oxygen, total nitrogen (T-N), nitrate-N (NO₃-N), and conductivity. NO₃-N was a key factor influencing phytoplankton community structure in the three lakes based on RF. A total of 24 species were identified as indicator species in the three lakes studied, with the highest species numbers observed in Yeongsan Lake (13) and the lowest observed in Yeongam Lake (2). According to SIMPER and ANOSIM results, the phytoplankton community in Yeongsan and Yeongam lakes were similar, and they differed from those in Gumho Lake. In addition, the phytoplankton community structure varied across the study sites in the three lakes, indicating that water channels across the lakes a minor influence phytoplankton community distribution.

• Journal of The Korean Association For Science Education
• /
• v.21 no.3
• /
• pp.529-536
• /
• 2001

The purpose of the research is to investigate the effects of a portfolio system on students' socio-psychological classroom environments in elementary science class. Two schools were selected from a metropolitan area, a city, and one school from a rural area in central Korea. Two fifth-grade classes were sampled from each school selected, and one class is assigned to experimental group and the other to control group, respectively. The total number of participants of the study is 399. Portfolio system was administered to experimental group, and conventional teaching to control group for two and half month. WIHIC, an inventory to measure socio-psychological classroom environment, was administered as a pre- and post-test. Experimental group gained statistically higher scores on WIHIC after administering portfolio system. They showed more positive perceptions on sub-areas of WIHIC such as teacher support, task orientation, and equity. There is interaction between region and group: the effects of the portfolio system is highest in rural area, lowest in metropolitan area, and the city in between. Portfolio system have positive effects on students' socio-psychological classroom environments. Enhanced socio-psychological classroom environments is expected to contribute to positive self-concept, higher science achievements, and self-directed learning.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.1-27
• /
• 2013

The purpose of this study was to find out the areas and their constitute elements of new apprenticeship through the expert of vocational education to improve the growth potential in the field of industry. Through the three times Delphi research process final composing areas and elements(total 6 areas and 41 sub-elements) of new apprenticeship were extracted. Followings are specific study results of 41 sub-elements for the 6 areas. In area A(Technology Skill aspect) total nine sub-elements were deducted as follows. Technology skill's field appling ability, new technology skill's acquisition, quality assurance ability, research development ability, material management using ability, problem solving ability, core technology skill understanding ability, idea's imagery expressing ability, creative design ability. In area B(Institutional aspect) total five sub-elements were deducted as follows. Flexible human material support, precise division of works, objective result assessment, institutionalization of responsibilities and liabilities between teacher and student, institutionalization of duty invention reward. In area C(Affective aspect) total eight sub-elements were deducted as follows. Manners and cooperation between teacher & student and peer, values for job, basic attitude for technology, job ethic sense, respect of other organization, active action to organization change, attitude of technology successor, service mind. In area D(Self-improvement aspect) total nine sub-elements were deducted as follows. Self evaluation and reflection, cultivate of organization understanding, career planning and developing ability, sound philosophy of life, communication ability, decision making ability, prepare of individual competence enhance system, self-control ability improvement, reaction of unexpected situation. In area E(Knowledge aspect) total four sub-elements were deducted as follows. Basic knowledge of relevant area, knowledge of new technology & preceding technology, fusion and relocation of knowledge, practical knowledge. In area F(Environmental aspect) total six sub-elements were deducted as follows. Awareness of business environment, understanding of education and practice environment, understanding of apprenticeship's business demand, connectivity of region community, adapt ability of labor market's change, awareness of society environment change.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.209-215
• /
• 2018

Purpose: The purpose of this study was to evaluate the clinical acceptability of the marginal and internal gap of Co-Cr metal copings fabricated with stereolithography (SLA). Methods: Titanium master dies were milled after scanning of the prepared tooth (n=30). For group I, Co-Cr metal copings were made from conventional lost-wax technique(LWT, n=10). For group II, the master dies were scanned and designed with CAD system. Then, metal copings were milled with Co-Cr(SUB, n=10). For group III(ADD, n=10), the scanning and design procedures were same as group II and burn-out resins were fabricated with SLA device. The marginal and internal discrepancies were measured under an optical microscope(100x) on ten reference points and were statistically analyzed with one-way ANOVA(${\alpha}=.05$). Results: The mean total discrepancies were $53.76{\pm}12.42{\mu}m$ in the LWT group and $69.82{\pm}15.48{\mu}m$ in the ADD group. The SUB group showed the largest total mean value $110.33{\pm}13.77{\mu}m$. There was statistically significant difference between the SUB and the other groups(P<0.05). Conclusion : Co-Cr metal copings fabricated with SLA technology showed clinically acceptable value on marginal and internal gap and there was no statistically significant difference between conventional lost-wax technique and SLA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1279-1286
• /
• 2009

This paper addresses the analysis of the interference produced between the LEO(Low Earth Orbit) satellite constellation and FS(Fixed Service) system operating in the same frequency and area. At first, we calculates the interference of FS system from the LEO satellite constellation depending on the number of LEO satellite antenna beams. Simulation results show that the amount of interference that was calculated from each region. This result can be used to define the carrier level for protecting FS system from total interference by LEO satellite constellation. In the second scenario, we calculates the interference of LEO satellite system earth station by the FS link depending on radius of protection area. The presented results can be used to design FS systems minimizing interference to earth station.

• Ecology and Resilient Infrastructure
• /
• v.9 no.2
• /
• pp.100-106
• /
• 2022

The relationships between river length and weir density versus fish species observed were analyzed for 210 local rivers in the Seomjin River system (SJR). A nonlinear exponential relationship between river length and number of fish species were observed. Model coefficient was 0.03 and coefficient of determinant (R²) was 0.59, meaning that about 59.0% of total variance was explained by river length variable. Predicted value by model and observed number of species showed a difference. About 110 local rivers (about 52.4%) showed lower value than predictive value. The average index of weir's density (IWD) in the SJR was about 2.7/km, which was significantly higher than that of other river basins. As a result of nonparametric 2-Kimensional Kolmogorov-Smirnov (2-DKS) analysis based on the IWD, the threshold value affecting fish diversity was about 2.5/km (D_max=0.048, p<0.05). Above the threshold value, it means that the number of fish species would be decreased. In fact, the ratio of the expected species to the observed species was lowered to less than 70%, when the IWD is higher than the threshold value. To maintain aquatic ecological connectivity in future, it is necessary to manage IWD below the threshold value.

• Korean Journal of Occupational Health Nursing
• /
• v.25 no.1
• /
• pp.55-64
• /
• 2016

Purpose: The aim of this study was to investigate the association between job stress and metabolic syndrome among male workers. Methods: A total of 396 male workers employed in an electronic company, located in 'P' city, Gyeonggi Province, who had taken medical examination at the 'D' hospital, volunteered in this study. All the data used in this study were obtained from 'D' hospital after getting consent and permission from the workers. General and occupational characteristics, medical history, and health-related behaviors of the subjects were obtained by self-administered questionnaire. Results: The highest occupational stress by sub-sector was reported in the order of insufficient job control, organizational system, lack of reward, job demand, job insecurity, physical environment, job culture, and relationship conflict. The prevalence rate of metabolic syndrome of the participants was 19.9%. The results of the multiple logistic regression analysis on metabolic syndrome of the subjects indicated that the syndrome was significantly higher among those with family history, smoking habit and ex-smoking, working duration of 3 years and over, and with higher total score of occupational stress. It was significantly more prevalent, when the degree of stress was high in the sub-sectors of occupational stress; job autonomy, job insecurity, lack of reward, and job culture. Conclusion: In conclusion, it is necessary to implement a plan to efficiently manage the job stress of these male workers, as the probability of metabolic syndrome increased with the increase of occupational stress. Furthermore, considering the highest occupational stress was found to be job autonomy among its sub-sectors, it is necessary to prepare various measures to enhance the autonomy of such employees.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.212-217
• /
• 2005

This experiment was conducted to investigate the effect of water soluble fertilizer(WSF) and slow release fertilizer(SRF) on the growth of carnation(Dianthus caryophyllus 'Invitation') cultured in C-channel mat irrigation system. Plants grown in $0.8{\~}1.0\;g{\cdot}L^{-1}$ of WSF showed the highest quality, especially on fresh and dry weight of aerial part, leaf number, total leaf area, plant height, and branch number. All plants showed increase of growth rate around 60 days after treatment, although there was a different increase rate. Total leaf area decreased its increase rate after 90 days after treatment. Carnations supplied by WSF showed better growth and quality than SRF, and the optimum concentration range of WSF for pot-carnation was $0.8{\~}1.0\;g{\cdot}L^{-1}$ in C-channel mat irrigation system.