• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.285-290
• /
• 2004

Low cycle fatigue tests are performed on the Inconel 617 that be used for a hot gas casing. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of Inconel 617. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Manson method. Also the cyclic behavior of Inconel 617 is characterized by cyclic hardening with increasing number of cycle at room temperature.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.166-175
• /
• 2002

Low cycle fatigue tests are performed on the HSLA steel that be developed for a submarine material. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of HSLA steel. The cyclic properties are determined by a least square fit techniques. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Manson method. Also the cyclic behavior of HSLA steel is characterized by cyclic softening with increasing number of cycle at room temperature. Especially, low cycle fatigue characteristics and microstructural changes of HSLA steel are investigated according to changing tempering temperatures. In the case of HSLA steel, the $\varepsilon$-Cu is farmed in $550^{\circ}C$ of tempering temperature and enhances the low cycle fatigue properties.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.612-615
• /
• 2005

Low cycle fatigue tests are performed on the Incollel 617 that be used fur a hot gas casing. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of Inconel 617. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Mansun method. Also the cyclic behavior of Inconel 617 is characterized by cyclic hardening with increasing number of cycle at room temperature.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.9-17
• /
• 2010

본 논문은 $20^{\circ}$ 각도의 굽힘과 50 ${\mu}m$ 인장조건에서 PGA (Pin Grid Array) 패키지의 lead pin에 발생하는 von Mises 응력과 전 변형률 에너지 밀도를 lead pin 소재의 열처리 온도 조건에 따라 유한요소법을 이용하여 해석하였다. 해석결과에 따르면 lead pin의 코너부와 리드핀의 헤드부와 솔더의 경계면이 국부적으로 응력이 집중되는 가장 취약한 위치이며 lead pin의 열처리 온도가 높을수록 발생하는 최대 응력과 변형률 에너지 밀도가 낮아져서 신뢰성이 우수한 것으로 판단된다. 또한 lead pin의 코너부에 라운드가공을 하면 헤드부와 솔더의 경계면에서 발생하는 von Mises 응력과 전변형률 에너지 밀도가 감소하였다. 이와 같은 해석결과는 전 변형률 에너지 밀도가 증가할수록 솔더의 피로수명이 감소하는 연구결과에 미루어볼 때 열처리를 통해 리드핀의 기계적특성을 변경하면 PGA 패키지의 신뢰성을 향상시킬 수 있음을 의미한다. 따라서, 리드핀의 형상최적화와 열처리를 통한 최적화된 소재특성을 통해 PGA 패키지의 신뢰성 향상이 요구된다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.18-22
• /
• 2013

The Co-base super heat resisting alloy ECY768 is employed in gas turbine because of its high temperature strength and oxidation resistance. The prediction of fatigue life for superalloy is important for improving the efficiency. In this paper, low cycle fatigue tests are performed as variables of total strain range and temperature. The relations between strain energy density and number of cycle to failure are examined in order to predict the low cycle fatigue life of ECY768 super alloy. The lives predicted by strain energy methods are found to coincide with experimental data and results obtained from the Coffin-Manson method. The fatigue lives is evaluated using predicted by Coffin-Manson method and strain energy methods is compared with the measured fatigue lives at different temperatures. The microstructure observing was performed for how affect able to low-cycle fatigue life by increasing the temperature.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.234-242
• /
• 2002

A shape optimal design of synthetic intervertebral disc prosthesis is performed using a three-dimensional finite element method. Geometric parameters are introduced to model the cross-sectional geometry of the intervertebral disc. It is assumed that the total strain energy in the intact intervertebral disc is minimized under the normal load conditions, as often cited in other references. To calculate the stain energy density, both the nonlinear material properties and the large deformations are taken into account. The design variables of the annulus fiber angle and the area ratio of the nucleus pulposus are calculated as 31°and 30%, respectively, which complies well with the intact disc. Thus, the same optimization procedure is applied to the design of the synthetic intervertebral disc prosthesis whose material properties are different from the intact disc. For the given synthetic material properties, the values of 67°and 24% for the fiber angle and the area ratio are obtained.

• 마이크로전자및패키징학회지
• /
• 제25권1호
• /
• pp.17-22
• /
• 2018

본 논문에서는 임베딩 패키지의 솔더 조인트 신뢰성에 미치는 솔더 조인트의 에이징 효과를 유한요소법에 의한 수치해석을 통해 연구하였다. SAC305 솔더 조인트의 에이징 시간은 0, 60, 180 일이 적용되었고 신뢰성 분석을 위해 패키지 휨, ECS(Equivalent Creep Strain) 및 TSED(Total Strain Energy Density)이 분석되었다. 연구결과에 따르면 임베딩 패키지의 휨이 비임베딩 패키지에 비해 감소하여 임베딩 패키지내 솔더 접합부의 신뢰성이 높을 것으로 예측되었다. 또한, 에이징 시간이 길수록 임베디드 패키지의 휨이 감소하지만 솔더 조인트의 신뢰성 수명도 감소할 것으로 분석되었다.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1403-1409
• /
• 2010

니켈기 초내열합금은 고온 강도를 지속적으로 증가시키며 현재 비행기 엔진, 선박 엔진 및 발전용 가스터빈 고온 부품 등을 만드는 가장 중요한 소재로 오래전부터 사용되어져 왔다. 이러한 부품의 수명을 연장하기 위해서는 사용 환경과 유사한 조건에서의 피로수명 예측이 매우 중요하다. 따라서 본 연구에서는 가스터빈 블레이드 소재인 니켈기 초내열합금 IN738LC에 대하여 실제운전환경과 유사한 조건을 설정하여 다양한 변형률 범위와 온도에서 시험을 수행하였다. 저주기 피로수명을 예측하기 위하여 변형률 에너지 밀도와 파단 사이클과의 관계를 사용하였다. 수명의 예측은 시험결과를 토대로 변형률 에너지법과 Coffin-Manson법에 의하여 예측을 하였다.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.753-758
• /
• 2011

초내열합금인 GTD-111은 고온강도와 내산화성이 우수하여 가스터빈에서 사용되는 소재이다. 초내열합금의 피로 수명 예측은 가스터빈의 효율을 개선하기 위하여 매우 중요하다. 본 연구에서의 저주기 피로시험은 실제 운전 환경과 유사하게 변형률 범위, 온도를 다양하게 설정하여 시험을 수행하였다. GTD-111의 저주기 피로수명을 예측하기 위하여 변형률 에너지 밀도와 파단 사이클과의 관계를 이용하였다. 시험결과를 토대로 변형률 에너지법과 Coffin-Manson법에 의하여 피로수명을 예측하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.