• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.42-45
• /
• 1992

The poly silicon thin films were prepared by solid phase crystallization at 600$^{\circ}C$ of amorphous silicon films deposited on Corning 7059 glass and (100) silicon wafer with thermally grown SiO$_2$substrate by plasma enhanced chemical vapor deposition with varying rf power, deposition temperature, total flow rate. Crystallization time, microstructure, absorption coefficients were investigated by RAMAN, XRD analysis and UV transmittance measurement. Crystallization time of amorphous silicon films was increased with increasing rf power, decreasing deposition temperature and decreasing total flow rate.

• 한국식품저장유통학회지
• /
• 제23권7호
• /
• pp.1065-1073
• /
• 2016

본 연구는 소비자가 원하는 후지사과의 품질 등급을 위한 기초 데이터를 제공하기 위하여 시장에서 판매되고 있는 상품 가격에 따른 후지 사과의 품질 특성 및 관능특성을 조사하였다. 시장 가격별(4그룹, 50개들이)로 후지 사과의 무게와 부피는 시료 간 유의적인 차이가 없었으며, pH와 적정산도는 A 그룹이 가장 낮은 3.99, 0.32%였고, 가용성 고형분 함량과 총 유리당 함량의 경우 가격이 비교적 높은 A 그룹과 B 그룹이 저가의 C 그룹과 D 그룹보다 높았다. 또 유기산은 A 그룹의 시료가 가장 높은 함량인 386.29 mg%, B, C, D 그룹은 320.09~359.23 mg%였다. 한편 훈련된 전문패널에 의한 묘사 분석 결과 사과 외관의 붉은색의 균일성과 사과 껍질의 윤기의 경우 A 그룹 가장 높게 평가하였다. 과육의 노란색 정도, 사과향, 단맛, 다즙성, 아삭함의 관능특성에서 A 그룹과 B 그룹이 C와 D 그룹보다 높은 점수로 평가하였다. 또 동일한 시료군의 후지 사과를 소비자 검사를 실시한 결과 전반적으로 묘사 분석 결과의 비슷하게 평가하였고, 전체적인 기호도는 A 그룹과 B 그룹이 각각 7.02과 6.92로 평가하였고, C 그룹과 D 그룹은 각각 3.89와 2.49로 평가하였다. 후지사과의 품질 특성과 관능적 품질 특성 상관관계 분석 결과 중 전체적인 기호도는 적정산도(r=0.58), 가용성 고형분(r=0.89), 당산비(r=0.42), 유리당(r=0.36) 및 유기산(r=0.38)과 양의 상관성을 나타내었다. 물리화학적 품질 특성의 주성분 분석 결과 총설명력은 66.01%이었고, 주성분 F1은 pH, 적정산도, 가용성 고형분, 유리당 및 유기산이었고, 주성분 F2는 사과의 무게와 크기로 물성 특성이었다. 또 관능적 품질 특성의 주성분 분석을 실시한 결과, 전문패널에 의한 주성분 분석 결과(a)는 총설명력은 56.55%였고, 소비자 검사 결과에 의한 주성분 분석 결과(b)는 총설명력은 55.84%로 전문패널원에 의한 주성분 분석 결과와 유사한 설명력을 보였다.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.975-982
• /
• 2009

본 연구는 부산시에 위치한 하천들에 대한 기본적인 퇴적물 데이터와 현재의 오염상태에 대한 정보를 제공하기 위한 목적으로 수행되었다. 먼저 부산시 하천중 14곳을 선정하고 대상하천의 퇴적물을 채집하였다. 그리고 퇴적물특성을 알아보기 위해 퇴적물의 화학적산소요구량, 강열감량, 유기탄소, 원소분석을 실시하였고 그 결과 퇴적물의 화학적산소요구량, 강열감량, 유기탄소, 총질소 함량이 각각 1.20~75.07 mg/L, 0.19~11.54 %, 0.23~34.21%, 0.76~3.46%로 나타났다. 퇴적물의 분석 데이터를 각각 USEPA 퇴적물 환경기준과 캐나다 온타리오 퇴적물 환경기준과 비교해 본 결과, COD, 강열감량, 총유기탄소 값으로 평가했을 경우 보수천과 구덕천이 다른 하천에 비해 상대적으로 심하게 오염된 것으로 평가되었지만 총질소 값으로 비교해 본 결과 결과적으로 모든 하천이 심한 오염상태인 것으로 평가 되었다. 최종적으로 퇴적물COD와 수분함량, 회분함량, 강열감량, 유기탄소량, 총질소, 총인과의 상관관계를 알아보기 위해 Linear 모델에 최소자승법을 적용해 fitting 하였고 그 결과 모든항목에서 퇴적물COD와 높은 상관관계 (r=0.9664~0.8501)를 띔을 알 수 있었다.

• 국방과기술
• /
• 7호통권281호
• /
• pp.66-75
• /
• 2002

과거 10년전만해도 산업, 난방, 발전 등이 대기오염의 주된 원인이었으나 자동차의 증가로 말미암아 최근에는 자동차의 배기가스 즉 질산화물질(NOx), 일산화탄소(CO), 탄화수소(HC), 총먼지(TSP : Total Solid Particlate), 아황산가스(SO2) 등이 대기를 오염시키는 주요 물질이 되었다. 인구의 증가, 산업의 발달, 경제수준의 향상은 자동차 증가를 촉진시키는데 촉매제 역할을 해왔으며 대도시에서의 자동차에 의한 오염물질 배출량은 앞으로도 차량의 증가와 더불어 가속화할 전망이다.

• 대한전자공학회논문지TC
• /
• 제46권12호
• /
• pp.22-29
• /
• 2009

본 논문에서는 X-대역 펄스압축 반도체형 레이다를 위한 200W SSPA를 개발하였다. 개발한 X-대역 SSPA는 전치증폭단, 구동증폭단, 고출력을 위한 주전력 증폭단의 3단 연계구조형 증폭기로 구성되어있다. X-대역에서 200W 이상의 출력을 내기 위해 주전력 증폭단은 충분한 이득과 전력을 얻을 수 있는 GaN HEMT소자를 사용하여 병렬구조로 설계하였다. 개발한 SSPA는 주파수범위 9.2-9.6GHz, 펄스주기 1ms, 펄스폭 100us, 듀티사이클 10% 조건에서 전체이득 59dB 이상, 출력전력 200W이상의 성능을 가진다. 본 논문에서 개발한 SSPA는 펄스압축기술을 이용한 고품위 반도체 레이다시스템에 적용할 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.283-292
• /
• 2008

The foremost criterion in the design of a Satellite Launch Vehicle(SLV) is its performance capability to boost the designated payload to the desired mission orbit; it starts from focusing on the SLV configuration to achieve the velocity requirements($}\Delta}V$) for the mission. In this paper we review an analytical approach which is suitable enough for preliminary conceptual design and is used previously to optimize stage configurations for Two Stage to Orbit SLV for Low Earth Orbit(LEO) Missions; we have extended this approach to Three Stage to Orbit SLV and compared different propellant options for the mission. The objective is to minimize the Gross Lift off Weight(GLOW). The primary performance figures of merit were the total inert weight of the SLV and the payload weight that the SLV could lift into LEO, given candidate propulsion systems. The optimization is achieved by configuring the $}\Delta}V$ between stages. A comparison of configurations of single-stage and multi-stage SLVs is made for different propellants. Based upon the optimized stage configurations a comparative performance analysis is made between Liquid and Solid fueled SLV. A 3 degree of freedom trajectory-analysis program is modeled in SIMULINK and used to conduct the performance analysis. Furthermore, a cost analysis is performed on our stage optimized SLVs. The cost estimation relationships(CER) used give us a comparison of development and fabrication costs for the Liquid vs. Solid fueled SLV in man years. The pros and cons of the production, operation ability, performance, responsiveness, logistics, price, shelf life, storage etc of both Solid and Liquid fueled SLVs are discussed. The statistics and data are used from existing or historical(real) SLV stages.

• Journal of Animal Science and Technology
• /
• 제58권10호
• /
• pp.36.1-36.5
• /
• 2016

Background: Liquid feeding system has been introduced to domestic swine farms, but negative cognition about liquid feeding system has been remained for feed waste decay related with poor management and microbial contamination. For these reasons, this study was conducted to evaluate the effects of feeding method in lactating sows. Methods: A total of 30 mixed-parity (average 4.13) lactating sows (Yorkshire ${\times}$ Landrace) with an initial BW of $218.8{\pm}19.5kg$ was used in a 3 week trial. Sows were allotted to 1 of 2 treatments in a completely randomized design by their body weight, backfat thickness, parity and alive litter weight. One of treatments was dry feeding and the other was liquid feeding (water to feed ratio, 1:1). Experimental diets contained 3265 kcal ME/kg, 12.6 % CP, 5.76 % EE, 1.09 % total lysine, 0.25 % total methionine, as fed basis. Results: Dry feeding treatment had high body weight loss rather than liquid feeding treatment (P = 0.04). Dry feeding treatment had tendency to increase litter weight at 21d of lactation (P = 0.06) and litter weight gain (P = 0.04) during lactation period (0-3 week). Sows fed dry feeding method made milk containing high content of casein and total solid rather than sows fed liquid feeding method (P = 0.04). In addition, dry feeding treatment had tendency to higher content of milk fat, protein and solid not fat on 21d of lactation (P = 0.07). Sows fed dry feeding type also showed higher milk energy content in milk of 21d lactation (P = 0.05). Furthermore, liquid feeding treatment showed high occurrence in feed waste during lactation period (P <0.01). Conclusion: Dry feeding method was more suitable feeding method to lactating sows under high temperature environment like lactating barn.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.210-215
• /
• 2018

Coal seam gas (CSG) water, to be discharged, has been usually treated in reverse osmosis (RO) plants which require extensive and expensive pre-treatment. However, current low gas prices have been a great driver for relevant industries to seek for alternative cost-effective technologies in the aspect of its beneficial use and fit-for-purpose usable water production. In this paper, a combined system with a two-stage pore control fiber (PCF) filtration and a RO system was designed and tested for CSG water treatment. Also, a coagulation reactor was placed in front of the PCF to further enhance suspended solid removal. More than 99% of SS were removed through the PCF filtration while organic, total nitrogen and total phosphorous were mostly removed by the RO system. Especially along with a decrease in conductivity, the total dissolved solid derived from salts was mainly removed in the RO system. Having $OH^-$ undetected, $HCO_3{^-}$ was found to be a dominant compound and its removal efficiency was 97-98% after the RO treatment. And a Fe(III) type of Polytetsu, which was the first to be tested in this paper, was found to be a better option than a Al(III) type of Poly Aluminium Chloride due to its greater coagulation efficiency and applicability at a broader range of pH than the Al(III) type. In addition, there was no noticeable change in oxidation reduction potential, suggesting that an additional process is required to oxidize non-ionic organic carbons (detected as total organic carbon).

• 한국식품조리과학회지
• /
• 제27권1호
• /
• pp.85-99
• /
• 2011

Grinding is an indispensible step in preparation of espresso coffee. The purpose of this study was to evaluate physicochemical and sensory characteristics of espresso according to the grinding grades of coffee beans. Specifically, physicochemical characteristics according to the grinding grades of coffee beans were tested based on foam index, persistence of foam, total solids, concentration, extraction yield, pH, viscosity, total soluble solid content and density. With regard to sensory characteristics, QDA were carried out by 10 trained panels. Persistence of foam, total solids, concentration, extraction, pH and viscosity in physicochemical test showed significant differences among the three categories of the samples. In other words, the finer the size of particles was, the higher value was, at the p=0.001 value. Meanwhile, the value of foam index and total soluble solid content to the grinding grades was the highest in 'fine', at the p=0.001 value. Tiger-skin effect in crema, an important attribute for excellent espresso coffee, was perceived by all of the panels in 'fine'. Also, intensity of flavor was perceived as to the strongest in 'fine'. Moreover, 'fine' had the sweetness to balance the acids and bitters. In conclusion, according to the grinding grades, it was identified that there were differences in the physicochemical and sensory characteristics. Furthermore, when the size of particles was 'fine', it brought to the most positive result.

• 한국농공학회논문집
• /
• 제59권3호
• /
• pp.41-50
• /
• 2017

The purpose of this study were to evaluate the effect of best management practices (BMPs) of Haean highland agricultural catchment ($62.8km^2$) under future climate change using SWAT (Soil and Water Assessment Tool). Before future evaluation, the SWAT was setup using 3 years (2009~2011) of observed daily streamflow, suspended solid (SS), total nitrogen (T-N), and total phosphorus (T-P) data at three locations of the catchment. The SWAT was calibrated with average 0.74 Nash and Sutcliffe model efficiency for streamflow, and 0.78, 0.63, and 0.79 determination coefficient ($R^2$) for SS, T-N, and T-P respectively. Under the HadGEM-RA RCP (Representative Concentration Pathway) 4.5 and 8.5 scenarios, the future precipitation and maximum temperature showed maximum increases of 8.3 % and $4.2^{\circ}C$ respectively based on the baseline (1981~2005). The future 2040s and 2080s hydrological components of evapotranspiration, soil moisture, and streamflow showed changes of +3.2~+17.2 %, -0.1~-0.7 %, and -9.1~+8.1 % respectively. The future stream water quality of suspended solid (SS), total nitrogen (T-N), and total phosphorus (T-P) showed changes of -5.8~+29.0 %, -4.5~+2.3 %, and +3.7~+17.4 % respectively. The future SS showed wide range according to streamflow from minus to plus range. We can infer that this was from the increase of long-term rainfall variability in 2040s less rainfalls and 2080s much rainfalls. However, the results showed that the T-P was the future target to manage stream water quality even in 2040s period.