• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.101-108
• /
• 2012

본 연구 결과는 해상풍력발전시스템 타워 내부에 설치하는 서비스리프트의 설계 및 구조해석에 대한 내용이며, 공학적 설계법 및 수치해석에 의한 구조해석을 통하여 서비스리프트의 안정성 및 신뢰성을 확인하였다. 설계의 주된 내용은 설계 허용한계 이내에서 만족스러운 성능으로 지상으로부터 타워상부의 해상풍력터빈 너셀까지 작업자와 수리보수용 장비를 안전하게 수송할 수 있는 충분한 능력을 확보하는 것이다. 구조해석을 통하여 서비스리프트 캐빈 및 안전장치의 총변형량과 등가응력에 대해서 검토하여 설계 시 적용한 안전율의 타당성을 검토하였다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.711-719
• /
• 2019

At present, wind power is the fastest growing technology in the world. The domestic market depends heavily on imports for wind tower lift. so it manage through the overseas maker. The lift manufacture, establishment and maintenance utility is increasing, localization development of one wind tower lift is necessary with domestic fundamental base technique. In this paper, we will study the components necessary for the development of onshore offshore wind tower elevators, which are currently dependent on total imports, in line with the high growth of the wind market and the enlargement of the wind power generators. First of all, endless winders and cabins, which are the core components of the offshore wind tower lift, were examined for the components that affect the structural safety. Structural analysis was performed on Sheave, which is responsible for most of the lift lifting loads, and Block Stop, a safety device that prevents the cabin from falling in an emergency. The structural suitability was evaluated by comparing with the safety factor. In addition, the on-board control panel combines the control panel of the elevator and the drive motor driving the endless winder for efficient control of the offshore wind tower lift. The addition of features improves ride comfort at departure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.615-616
• /
• 2009

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.182-187
• /
• 2006

Aerial application using an unmanned agricultural helicopter can reduce labor and pollution. The development of an agricultural helicopter became urgent for both precise and timely spraying. In this study, a rotor system for unmanned helicopter capable of 20 $kg_f$ payload, was developed and lift capability was evaluated. A lift force over the dead weight of the helicopter was obtained at the pitch angle of $6^{\circ}$. As the pitch angle increased to $8^{\circ}\;and\;10^{\circ}$, the total lift increased to $74{\sim}81\;kg_f\;and\;86{\sim}93\;kg_f$, respectively. A range of engine speed at the rated flight condition, lifting mean payload of 23 $kg_f$ was determined. The data acquired from this study will be used for designing tail system and RF console in the next stage of the research. The rated lift capability was enough for loading 20 liters of spray material including spraying equipments.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.117-122
• /
• 2015

There has been a string of negligent accidents at the seaside, and there is presently a shortage of professional equipment to deal with such accidents. The purpose of this paper is to assess the development of a rescue lift. The critical load of a support pipe, and the stability of the rescue lift, were investigated using structural analysis. Critical-load analysis was used to study the effects of variations in the pipe length and the ratio of the moment of inertia. The total weight of the developed rescue lift is approximately 20.7 kg, and the lift passed the load tests.

• 수산해양교육연구
• /
• 제24권1호
• /
• pp.18-24
• /
• 2012

This study analyses the effects of various angles in sculling on human body lift and drag by means of computational fluid dynamics, discusses the importance of sculling and provides a basis for the development of future water safety education programmes. Study subjects were based on the mean data collected from males in the age of 20s from a survey on the anthropometric dimensions of the Koreans. Moreover, lift, drag as well as coefficient values, all of which were governed by the angle of the palm, were calculated using 3-dimentional modelling produced by computational fluid dynamics programmes i.e. CFD. Interpretations were performed via general k-${\varepsilon}$ turbulence modelling in order to determine lift, drag and coefficient values. Turbulence intensity was set to one per cent as per the figures from preceding research papers and 3-dimentional simulations were performed for a total of five different angles $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$. The drag and lift values for the differing angles of the hands during sculling movement are as follows. The lift and drag values gradually increased with the increasing angle of the palm, however, the magnitude of increase for drag started to predominate lift from $45^{\circ}$ and lift gradually decreased from $60^{\circ}$. Overall, it is concluded that the optimal efficiency of sculling can be achieved at the angles $15^{\circ}$ and $30^{\circ}$, and it is anticipated that greater safety and informative education can be ensured for Life saving trainees if the results were to be applied to practical settings. However, as the study was conducted using simulation programmes which performed analyses on the collected anthropometric dimension, the obtained results cannot be made universal, which warrants furthers studies involving varied study subjects with actual measurements taken in water.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.349-356
• /
• 2017

The catch composition of commercially important species of the stationary lift net at Barangay Gines, Miagao, Iloilo, the Philippines was investigated from December 2013 to May 2014 during the different phases of the moon. A total of 486 kg of fish coming from 12 different genera, including mollusk and crustaceans, was caught and identified from the catch of the stationary lift net. Among the 12 genera identified from the catch of stationary lift net, anchovy (Stolephorus), sardines (Sardinella), squid (Loligo) and mysid shrimp (Acetes) were considered to be commercially important due to their value. Acetes catch was highest during the new moon in the month of January. Loligo catch was also high during the new moon except in the month of May. Stolephorus catch was also highest during the new moon except in the month of January. Sardinella catch was highest during the first quarter in the month of February. Full moon had the lowest catch all throughout the duration of the study while new moon had the highest catch during December 2013 to March 2014 and first quarter was the highest in the months of April and May.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.135-143
• /
• 2012

초고층 건축물은 일반적 건축물에 비해, 구조, 환경적 분야 뿐 아니라 시공 분야에서도 골조공사와 마감공사의 시공방법, 재료, 공사관리 등에서 차이점이 있다. 특히 초고층 건축물 시공에서 요구되는 다양한 관리기법 중 양중계획 및 관리는 핵심적인 분야이며, 건설공사에 필요한 인원 및 자재와 같은 자원을 리프트카와 같은 양중기계장비를 이용하여 효율적으로 수직이동하여야 한다. 그러나 리프트카의 경우 초기 수립된 계획과 실제 운영에 차이가 발생하는 경우가 많고 이러한 비효율성으로 인해 문제가 발생하는 경우가 많다. 본 연구에서는 양중작업에 사용되는 리프트카를 대상으로 건축마감공사의 자원물량에 근거한 양중부하 산정 방법 및 예측 모델을 제시하고자 한다. 그 결과 리프트카 운행시간 및 사이클타임을 계산하여 총 양중장비 가동시간 및 양중가능 물량을 산출할 수 있을 것이다. 이를 양중장비조합을 위한 의사결정 지원 모델 구축을 위한 연구로 발전시켜 나갈 것이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권2호
• /
• pp.28-36
• /
• 2007

A multi-objective design exploration for a three-element airfoil consisted of a slat, a main wing, and a flap was carried out. The lift curve improvement is important to design high-lift system, thus design has to be performed with considered multi-angle. The objective functions considered here are to maximize the lift coefficient at landing and near stall conditions simultaneously. Kriging surrogate model which was constructed based on several sample designs is introduced. The solution space was explored based on the maximization of Expected Improvement (EI) value corresponding to objective functions on the Krigingmodels. The improvement of the model and the exploration of the optimum can be advanced at the same time by maximizing EI value. In this study, a total of 90 sample points are evaluated using the Reynolds averaged Navier-Stokes simulation(RANS) for the construction of the Kriging model. In order to obtain the information of the design space, two data mining techniques are applied to design result. One is functional Analysis of Variance(ANOVA) which can show quantitative information and the other is Self-Organizing Map(SOM) which can show qualitative information.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.156-163
• /
• 2015

The number of the lifts installed and used in Korea totals up to 526,676 units as of the end of December 2014, due to the development and urbanization of this country. Since the lift is one of the convenience facilities and especially a kind of essential transportation facilities used by a majority of passengers everyday, it is necessarily required to manage the lift safety. Therefore, this study aims to determine the 5 factors(kinds of lifts, ages of victims, causes of accidents, seasons in accidents, usages of buildings) affecting the types(caught in, trip over, falling, collision) and the injury levels(death, serious injury, minor injury) of the lift accidents based on the analysis of the total victims of 1,514 people due to the 1,146 accidents which have occurred for the past 15 years, and to find the frequency and ratio of each factor in the accidents, and to make a correlation among the factors. As the result of the analysis, it shows that there exists a statistically significant correlation among the factors.