• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.30-37
• /
• 2017

In Korea, additional indirect costs generated from the time period extension of public construction projects have been studied. Practical claims against such costs are increasing. There are no clear criteria for calculating the delay cost caused by the extension, and thus calculation methods differ across entities. Logical valid calculation methods have also not been researched. Further, there are no Korean studies on the additional indirect cost caused by a suspension in a public construction project on a long-term continuing contract. The purpose of this research is to propose a method of calculating the indirect cost incurred by construction time extension that reflects the characteristics of Korean public construction projects. The cost patterns generated during construction periods were analyzed, and then the current criteria of calculating the indirect costs caused by the extension were examined. Following this, actual conditions and practices in the field were surveyed and the current calculation method was applied to a model case to compare the actual cost and that determined from the current calculation method. Issues with the current method were identified by this comparison. Based on this, this research proposes a method of calculating the total actual cost caused by a suspension in a public construction project that is appropriate for calculating the additional indirect cost generated by a suspension in a public construction project on a long-term continuing contract.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.4
• /
• pp.21-35
• /
• 2016

This study is to evaluate the applicability of SWAT (Soil and Water Assessment Tool) model for multi-purpose dams and multi-function weirs operation in Namhan river basin ($12,577km^2$) of South Korea. The SWAT was calibrated (2005 ~ 2009) and validated (2010 ~ 2014) considering of 4 multi-purpose dams and 3 multi-function weirs using daily observed dam inflow and storage, evapotranspiration, soil moisture, and groundwater level data. Firstly, the dam inflow was calibrated by the five steps; (step 1) the physical rate between total runoff and evapotranspiration was controlled by ESCO, (step 2) the peak runoff was calibrated by CN, OV_N, and CH_N, (step 3) the baseflow was calibrated by GW_DELAY, (step 4) the recession curve of baseflow was calibrated by ALPHA_BF, (step 5) the flux between lateral flow and return flow was controlled by SOL_AWC and SOL_K, and (step 6) the flux between reevaporation and return flow was controlled by REVAPMN and GW_REVAP. Secondly, for the storage water level calibration, the SWAT emergency and principle spillway were applied for water level from design flood level to restricted water level for dam and from maximum to management water level for weir respectively. Finally, the parameters for evapotranspiration (ESCO), soil water (SOL_AWC) and groundwater level fluctuation (GWQMN, ALPHA_BF) were repeatedly adjusted by trial error method. For the dam inflow, the determination coefficient $R^2$ was above 0.80. The average Nash-Sutcliffe efficiency (NSE) was from 0.59 to 0.88 and the RMSE was from 3.3 mm/day to 8.6 mm/day respectively. For the water balance performance, the PBIAS was between 9.4 and 21.4 %. For the dam storage volume, the $R^2$ was above 0.63 and the PBIAS was between 6.3 and 13.5 % respectively. The average $R^2$ for evapotranspiration and soil moisture at CM (Cheongmicheon) site was 0.72 and 0.78, and the average $R^2$ for groundwater level was 0.59 and 0.60 at 2 YP (Yangpyeong) sites.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1334-1342
• /
• 2015

The aim of this study was to investigate the quality characterization of salmon oil microencapsulated with maltodextrin (MD), cyclodextrin (CD), sodium caseinate (SC), arabic gum (AG) and WPI. After spray drying to ambient temperature, the salmon oil powders were packed (single package) and placed at room temperature ($25^{\circ}C$) for 30 day. The quality characterization of salmon oil powder including total oil (%), extractable oil (%), encapsulation efficiency (%), fatty acid, SEM, pH, acid value (AV), peroxide value(POV) were investigated. Salmon oil was microencapsulated with a high power yield (> 80%); including the formulation MD/SC and MD/SC/WPI. The microencapsules of MD/SC/WPI presented spherical shapes, smooth texture and non-porous surfaces. The pH of MD/SC/WPI varied from 6.11 to 5.99 (p>0.05). The AV of MD/SC/WPI varied from 4.74 to 4.61 (p>0.05). The pH and AV were not significantly different. The POV of MD/SC/WPI increased with storage day (p<0.05). It was concluded that MD/SC/WPI could delay lipid oxidation and high yield (82.55%) of salmon oil powder.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.785-808
• /
• 2016

The objective of this study was to investigate the effect of the short-term weathering on the flame retardant performance of wood coated with Dancheong. Flame retardants were applied on the Dancheong coated Korean red pine. Flame retardants applied panels were layed at the two conditions of outdoor exposure and artificial aging to assess the reliability of artificial aging. Flame retardants used were commercial products developed for historical wooden buildings. Scanning electron micrographs revealed the forming of carbonized membrane by melting of flame retardant on wood surface. These carbonized membranes may help delay the further combustion of wood. Flame retardant performance was assessed by measuring heat release rate (HRR) and total heat release (THR) by cone calorimetry. There was no difference in flame retardant performance between before and after 6-month outdoor exposure tests. And also no difference in flame retardant performance between before and after 2-week artificial aging which corresponds to 6-month outdoor exposure. Both tests showed the similar results of combustion characteristics.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.11-21
• /
• 2007

The study was undertaken to present the quantitative materials available in underwater industries, underwater rehabilitation & physical training through comparison & analysis of effects contributing to propulsion of COG by types of fin-kick in underwater activities. For this 3D cinematography was performed for the skilled subjective and conclusions obtained on the basis of analysis of kinematic variables were as follows. In temporal variable the delay in the order of flutter>side>dolphin kick in elapsed time by total & phase resulted in longer sliding phase by larger fin kick of extension & flexion of both leg and thus more contributed in propulsion of COG. than those of the otherwise. In linear variable the contribution ratio to the result of propulsion of COG in both propulsive(mean $35.39{\pm}7.93cm$ in Y axis) and sliding phases(mean $66.36{\pm}11.01cm$ in Y axis)was shown to be order of flutter>dolphin>side fin kick. the maximum velocity of COG in Y direction was showed in both propulsive and sliding phases, and the contribution ratio to the propulsion of COG was in the order of flutter$\geq$dolphin>side fin kick. In angular variable the Significant difference in angle of leg joint by types of fin kick in both leg was showed but no routine order. The Significant difference in angular velocity of leg joint by types of fin kick in both leg was showed in the order of flutter>dolphin$\geq$side fin kick in propulsive but no in sliding phase. The Fluid resistance by tilting angle of trunk in both propulsive and sliding phase was decreased in the order of flutter>dolphin$\geq$side fin kick and tilting angle of trunk of the skilled was smaller than that of the unskilled in difference of maximum mean 7.97degree and minium mean 2.06degree. In summary of the above, It will desirable fin kick type because of more contribution to COG propulsion by the velocity & displacement in Y-axis and less fluid resistance by tilting angle of trunk and larger angular velocity in the case of more delayed in elapsed time of propulsive phase than that of the otherwise.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.495-500
• /
• 2003

To establish the dual-purpose barley cultivation for forage by clipping before overwintering and grain next year, an experiment was conducted to clarify the effect of clipping times and cultivars haying different winter habits in rice-barley cropping system at paddy field in southern Korea. Barley showed more forage yield by clipping once only on December 10 than that of twice-clipping on November 10 and December 10. Among experimented cultivars, Saegangbori (winter habit II) and Keunalbori (winter habit IV) produced higher forage yield in one time clipping than the others. On the contrary, higher total digestive nutrients(TDN) was gained from twice-cut plants. Barley clipped once or twice headed and matured without serious delay as compared to the conventionally sown barley. In spite of clipping in November and/or December, barley produced grain yield similar to that of the conventional. Conclusively, it was regarded that cultivars having II-III winter habit were suitable for dual-purpose barley cultivation for forage in winter season and grain harvest next year.

• Journal of Korean Dental Science
• /
• v.1 no.1
• /
• pp.28-34
• /
• 2008

Objectives. The objectives of this study were: 1) to compare the effect of varying timing of light curing on shear bond strength, and; 2) to compare the shear bond strength of three self-adhesive cements. Materials and methods. A total of 72 extracted non-carious teeth were divided into 24 for Unicem tests, 24 for Maxcem tests, and 24 for Biscem tests; they were assigned 3 * 2 subgroups of 12 teeth each. The specimens were prepared as follows: 1) The calculus and periodontal ligament were removed from the teeth; 2) The teeth were stored in normal saline; 3) The occlusal enamel of each tooth was removed using high-speed coarse diamond burs under water cooling, and; 4) Finally, the teeth were flattened by 600-grit silicone carbide paper disks. Resin blocks were adhered using either Unicem, Maxcem, or Biscem. Light curing timing was divided into two groups: U10, M10, and B10 were exposed to light after 10 seconds, and; U150, M150, and B150 on the other side were exposed to light after 150 seconds. Shear bond strength was measured by a Universal testing machine with cross head speed of 1mm/min. T-test and One way ANOVA were used for the statistical analysis of data. Results. The shear bond strength of U150 was not significantly higher than that of U10 (U150: 20.55.7Mpa, U10: 18.73.80Mpa). On the other hand, the shear bond strength of M150 was significantly higher than that of M10. The shear bond strength of B150 was also significantly higher than that of B10 (M150:14.45.7Mpa, M10: 9.94.2Mpa, B150: 24.38.3Mpa, B10: 17.27.3Mpa). When the light curing timing was 10sec after bonding, the shear bond strength of Unicem was highest; the shear bond strength of Biscem was highest when the light curing timing was 150sec after bonding (U10: 18.73.80Mpa, B150: 24.38.3Mpa). Significance. Since Unicem is less sensitive based on light curing timing, dentists seem to use it without considering the light curing timing. Maxcem showed the lowest bonding strength (especially M10). Thus, when using Maxcem, dentists need to delay the light curing after adhesion.

• The Journal of Korean Academy of Sensory Integration
• /
• v.13 no.1
• /
• pp.33-43
• /
• 2015

Objective : The purpose of this study is to investigate the effect of parent education program with sensory integration approach on the parent's understanding of sensory processing ability of their own children with developmental delays. Methods : The period of this study is from March 15, 2015 to May 10, 2015. The participants of this study were thirty of parents who have children with developmental delays. The participants were randomly divided as experimental group (15 parents) and control group (15 parents) and an educational program was provided to those parents in the experimental group. The education program was developed based on sensory integration approach and 1:1 intensive individual counseling education. Short Sensory Profile (SSP) & a specially designed questionnaire were used to evaluate the parent's understanding of sensory processing ability of their children with developmental delays. The effect of between the groups was analyzed using an independent two samples t-test, and the effect of the intervention within a group was measured using the paired t-test. Results : After the intervention of parent education program, the total score of SSP was significantly decreased and the score of the parent questionnaire was significantly increased (p<.05). Conclusion : The results of this study show that parent education program with sensory integration approach is effective to improve the parent's understanding of sensory processing ability of their children with developmental delays. This study can be used as a good resource for therapists who is planning to provide sensory integration treatment for children with disabilities.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.125-133
• /
• 2016

The Project Risk Management is intended to result in the effective management by identifying in advance and mitigating all significant risks including project risks and opportunities during the entire project life cycle - from project inception to completion of construction. It is impossible to predict an exact budget and construction duration before finishing a project. So, Washington Department of Transportation mandates that workshop-based risk management is conducted for projects over specific cost. However, the domestic construction sites have depended on numerical risk analysis without any workshop and efficient risk management have not made. Therefore, in this study, we propose the effective risk management using the RBES program which is very useful for workshop-based risk management and pre & post mitigation, by workshop-based risk management techniques. This proposed risk management approach is applied to a domestic 'A' river recovery project. It is concluded that we may expect the effect to mitigate the total cost overrun problem and the construction duration delay effect in the project by identifying significant risks and by preparing effective risk mitigation strategies.

• The Korean Journal of Nuclear Medicine
• /
• v.1 no.1
• /
• pp.1-19
• /
• 1967

The effects of X-ray irradiation and the thyroid gland on the erythropoietic system were studied in the white male rabbits. The total body irradiation was done in doses of 250 r and 500 r to each of 5 rabbits for 10days. The factors were 220KV, 10mA, FLI/4 Cu+1 mmAI(HVL:2.0 mm Cu) 50 cm F.S.D. The thyroid dysfunction was experimentally induced, by giving 2mg of thyroid tablets per kg body weight for 15 days in 5 rabbits for hyperthyroidism and by giving 1.5 mC of $^{131}I$ per kg body weight in another 5 rabbits for hypothyroidism. Fourteen healthy rabbits were used as control. The hematologic changes and ferrokinetic data obtained from $^{59}Fe$ and apparent half survival of the red blood cells obtained from $^{51}Cr$ were compared. Following were the results: A. X-ray irradiated group; 1. There were no significant changes in hematologic findings except for leucopenia. A slight decrease of red blood cells was observed in 500 r irradiated animals. 2. The decreases in the iron turnover rates of the plasma and red blood cells as well as in the red cell renewal rate were found in both groups. A :significant decrease of the red cell iron utilization rate was observed in the 500 r irradiated animals. 3. The apparent half survival times of the red blood cells were slightly, in the 250 r ($12.1{\pm}0.80$ days), and markedly shortened in the 500 r irradiated animals ($9.8{\pm}1.38$ days), the normal being $14.0{\pm}1.6$ days. 4. It appears, therefore, that the anemia caused by X-ray irradiation is due to the inhibition of hemopoietic function and the excess destruction of the red blood cells. B. Thyroid dysfunction group; 1. The slight increases of the red blood cell count and circulating blood volume with the normal serum iron level were observed in the hyperthyroid group, while the decreases of the red and white blood cell counts, hemoglobin and hematocrit values with a marked decrease of the serum iron level in the hypothyroid group. 2. A marked decrease of the plasma iron disappearance rate with increases of plasma iron turnover, red cell iron utilization and red cell iron turnover were observed in the hyperthyroid group, while the marked delay and decreases in the hypothyroid group. 3. The apparent half survival times of the red blood cells were almost the same with the control in the hyperthyroid group, ($14.0{\pm}1.58$ while a marked shortening in the hypothyroid group $10.6{\pm}0.30$. 4. It was reconfirmed that the thyroid hormones bear a close relationship with the erythropoietic system, namely, the latter is stimulated by the former. The lack of the thyroid hormones thus induces the bone marrow depression leading to anemia the major cause of which, therefore, is not hemolysis.