• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1518-1518
• /
• 2001

In the area of the destruction-free NIR analysis of fruit and vegetables development has not yet progressed as far as in grain and similar products. One reason for that is, that in contrast to grains, in fruit and vegetables water appears as the outstanding main-component making up typically 80% by weight of the fruit. Of the M absorption spectrum of pure water the bands at 1450, 970 and 760 nm are the first, second and third overtones respectively of O-H stretch while those at 1940 and 1190 are combination bands involving O-H stretch and O-H bend. The choice of band for spectrometry is governed by considerations of sensitivity and selectivity. The overtone bands are satisfactory for use in moisture measurements from 0 to 4 % depending on path length. Measurements in fruits and vegetables at wavelength areas that are also important for the determination of carbohydrates (sucrose, glucose, fructose) often lead to total absorption in the presence of significant water even if short path lengths are possible. In this work model systems are used containing different carbohydrates in solvents like heavy water (D$_2$O) or dimethylsulfoxide (DMSO) that do not contain O-H functional groups.

• Archives of Plastic Surgery
• /
• v.33 no.4
• /
• pp.465-468
• /
• 2006

Purpose: Subciliary approaches to orbitozygomatic fractures have high incidence of complications such as scleral show and ectropion. Abnormal rearrangement of eyelid flaps may be a very important factor to induce abnormal cicatrical and consequent contracture. To prevent this problem, we used temporary lower eyelid suspension. Methods: A total of two hundred five patients were investigated for lower eyelid complication of orbitozygomatic fractures that underwent reconstruction with subciliary approach. The lower eyelid margin was pulled up toward the forehead using lower eyelid suspension suture to stretch the lower lid flaps. The lid suspension was maintained for one day after surgery. Results: The complications of the lower eyelid were in 15 cases(7.3%); seven cases(3.4%) of visible depressed scar, three cases(1.4%) of scleral show, two cases(1%) of ectropion, two cases(1%) of conjunctival swelling and one case(0.5%) of hematoma. Conclusions: The lower eyelid suspension seems to allow adhering lid flap in proper anatomical position and in the status of the maximal stretch and consequently preventing the severe complications such as scleral show and ectropion caused by scar contraction after subciliary approach.

• Journal of Theoretical and Applied Mechanics
• /
• v.1 no.1
• /
• pp.97-109
• /
• 1995

In this paper, a finite viscoelastic continuum model for rubber and its finite element analysis are presented. This finite viscoelatic model based on continuum mechanics is an extended model of Johnson and Wuigley's 1-D model. In this extended model, continuum based kinematic measures are rigorously defied and by using this kinematic measures, elastic stage law and flow rule are introduced. In kinematics, three configuration are introduced. In kinematics, three configuration are introduced. They are reference, current and virtual visco configurations. In elastic state law, it is assumed that at a certain time, there exists an elastic potential which describes the recoverable elastic energy. From this elastic potential, elastic state law is derived. The proposed flow rule is based on phenomenological observation. The flow rule gives precise relaxation response. In finite element approximation, mixed Lagrangian description is used, where total and similar method of updated Lagrangian descriptions are used together. This approach reduces the numerical job and gives simple nonlinear syatem of equations. To satisfy the incompressible condition, penalty-type modified Mooney-Rivlin energy function is adopted. By this method nearly incompressible condition is obtain the virtual visco configuration. For verification, uniaxial stretch tests are simulated for various stretch rates. The simulated results show good agreement with experiments. As a practical experiments. As a preactical example, pressurized rubber plate is simulated. The result shows finite viscoelastic effects clearly.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.721-728
• /
• 2007

The prediction of quality characteristics during the design phase of a construction project was fragmented, because no particular method exists. One of the most important key responses is the total displacements (horizontal and vertical). A brainstorming session produces the quality parameters i.e. the control factors which here are identified as: the steel joint, the pile's length, the excavation depth and angle, the distance between the piles, the anchor stretch and length to name just some of the most engaging in the design. The purpose of this study is to optimise these parameters to minimize the total displacements following a methodology based on Taguchi method. For this reason, a 2-level, L₈ orthogonal array has been employed to organize the experimentation. Data is obtained from a real-life excavation project designed on the Plaxis v.8 CAE package. Taguchi analysis is performed in the statistical package Minitab.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.136-143
• /
• 2012

The purpose of this study was to investigate the influence of physical functions of elderly people on their clothing behavior and to provide basic information about manufacturing comfortable apparels for the elderly. A total of 219 people, with ages between 60s and 70s, participated in the survey and in the experiment to correlate their tendency of wearing clothes with the state of their physical functions. About 78.5% of the elderly showed eyesight deterioration in the subjective evaluation. Elders in their 60s raised their arms higher up in overhead reach, and showed shorter distance between middle fingertips in behind back stretch and in back scratch than elders in their 70s. Also, the former stretched farther to the floor in standing trunk flexion, and maintained more steady in one leg stand and in tandem stance than the latter. The narrower the movement range of the upper limb joints was, the more the elderly preferred upper garments with full front opening to those with half or no opening. The more inflexible the upper limbs and waist and the more unbalanced the body was, the more likely the elderly put on pants while sitting on the floor. The time taken to button up the shirt and to put on and take off pants showed a positive correlation with the overhead reach, the behind back stretch, the back scratch and the standing trunk flexion, whereas the former showed a negative correlation with the one leg stand and the tandem stance.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.136-146
• /
• 2017

Purpose: This paper presents an appropriate wrapping method by analyzing the pressure distribution applied to a bale surface, along with the change in pressure according to an increase in the number of film layers in rice straw bales, which account for 74% of the total bulky feed supply in Korea. Methods: A model with the shape of an actual bale was fabricated to analyze the distribution of surface pressure in bale wrapping, and the pressure was measured. Experiments were conducted to analyze the pressure using eight different layer numbers (2, 4, 6, 8 10, 12, 14, and 16 layers) at five wrapping speeds (27, 29, 31, 33, and 35 rpm). Results: The maximum pressure applied to a circular bale by the film occurred at the center of the end of the bale, whereas the minimum pressure occurred at the center of the bale side. An extreme value ratio between the minimum and maximum pressures was distributed as 8.5-56.6%, which was improved with an increase in rotation speed. The an uneven pressure distribution occurred because the number of film overlaps was 8.24-times greater at the center of the bale's end than at the center of the ba le side. At a level 5 rotation speed, the minimum pressure was $P_{LV5-M1}=0.0625{\sigma}^2+36.173{\sigma}-36.753$ ($R^2=0.9845$) at $M_1$, and the maximum pressure was $P_{LV5-M6}=5.5552{\sigma}^2+41.05{\sigma}-39.071$ at $M_2$, revealing a correlation of $R^2=0.9983$. Conclusions: To replace four layers with six layers, 2-4 layers were added only to the side of the bale, and the minimum pressure at $M_1$ was then improved from that at four layers to that at six layers, and the amount of film consumed for 4-6 layers was reduced by 84.6%.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.4
• /
• pp.61-67
• /
• 2015

Purpose : The purpose of this study was to find out the effect of exercise on the angle and distance between scapular stability and McKenzie stretch exercise. Method : 30 volunteers took part in this experiment and we divided into three groups(experimental group A, experimental group B, control group C). Experimental group A performed scapular stabilization exercise and experimental group B performed McKenzie neck stretching exercise and control group didn't perform any exercise. Experimental group(A, B) received a total of 12 exercise session over a 4 week period (three times per week). Posture and craniovertebral angle changes of the neck using GPS measurements reported. Result : The CVA and distance change after exercise were significantly reduced in the experimental group A and B. Conclusion : Therefore, we have confirmed through experiments reducing a CVA and distance between scapular stabilization and McKenzie neck stretching exercises, whereby we would also be helpful to ensure the treatment of forward head posture.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.343-350
• /
• 2007

This study compared and studied the clothing mobility of two types of aerobic clothes - those made of currently popular stretch materials and those made of new stretch materials that were specially developed for this study. The focus of the comparison was on the range of joint movement during activity, and the physiological burden imposed on the body by the clothes. In total, 18 experiments were carried out under controlled conditions in an artificial climatic chamber with a temperature of $25{\pm}1^{\circ}C$, air humidity of $60{\pm}5^{\circ}C$ and negligible air movement. Each exercise program consisted of a 30-minute of aerobic workout and a 20-minute rest following the exercise. Measurements were taken to determine the following: physiological reactions (whole-body and local sweat rates), subjective sensations(of temperature, humidity, comfort, tightness, and clothing wetness), joint angle(measured with a goniometer), and so on. The results of the study us as follows: Material B excels in clothing mobility. Material C excels in sweat absorbency and drying speed. Material A was found to be the hottest material, while material C was found to be slightly hot through the analysis of the change in pre- and post-exercise bodyweight(= amount of sweat). Regarding the amount of evaporated sweat, material A>material C>material B. Material B produced the smallest amount of evaporated sweat. The wider the range of joint movement, the smaller the amount of sweat and the lower the average skin temperature.

• Journal of Life Science
• /
• v.19 no.11
• /
• pp.1568-1574
• /
• 2009

The purpose of this study was to investigate whether group III muscle afferents play an important role eliciting abnormal blood pressure response mediated during passive muscle stretch in prehypertensive individuals. Eleven middle-aged prehypertensive men (average BP 133/80 mmHg) and nine middle-aged normotensive men (average BP 119/74 mmHg) participated in this study. After 1 min rest baseline data collection, the subject's foot was flexed (dorsiflexion) by an automated cybex for one minute. Systolic blood pressure (SBP), diastolic blood pressure (DBP), mean arterial blood pressure (MAP), heart rate, stroke volume, cardiac output, and total peripheral resistance were continuously measured on a beat-by-beat basis from a finger via a Finapres device for 1 minute. To evaluate the role of mechanoreflex, a component of exercise pressor reflex, SBP, DBP, and MAP responses over the course of time were examined. The results showed that the pressor response mediated by the muscle mechanoreflex was faster in prehypertensive individuals compared to the normotensive individuals. The substantial pressor response was observed within mean 20 sec of the onset of passive stretch in prehypertension, while mean 45 sec in normotension (p<0.05). It is concluded that excessive pressor response produced during exercise in prehypertension may be due to the dysfunction of the mechano-receptors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.