• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.89-95
• /
• 2017

This paper presents another maintenance policy for a group of units under finite operating horizon. A group of identical units are subject to random failures. Group maintenances are performed to all units together at specified intervals, and the failed units during operation are remained idle until the next group maintenance set-up. Unlike the traditional assumption of infinite operating horizon, we adopt the assumption of the finite operating horizon which reflect the rapid industrial advance and short life cycle of modern times. The units are under operation until the end of the operating horizon. Further, the operation of units are extended to the first group maintenance time after the end of the horizon. The total cost under the proposed maintenance policy is derived. The optimal group maintenance interval and the expected number of group maintenances during the horizon are found. It is shown that the proposed policy is better than the classical group maintenance policy in terms of total cost over the operating horizon. Numerical examples are presented for illustrations.

• 한국환경과학회지
• /
• 제32권7호
• /
• pp.483-492
• /
• 2023

In this study, the treatment of livestock wastewater using an aerobic granular sludge based sequencing batch reactor was investigated. The reactor operation was carried out by general injection and split injection methods. The average removal efficiency of organic matter after the adaptation period was 71.5 and 87.4%, respectively. Some untreated organic matter was attributed to recalcitrant organic matter. The average removal efficiency of total nitrogen was 65.6 and 88.4%, respectively. These results indicate that the denitrification reaction by split injection was carried out smoothly. As for the solids, the ratio of aerobic granular sludge/mixed liquor suspended solid can be determined as the main factor of the process operation, and the ratio increased gradually and finally reached 86.0%. Correspondingly, the sludge volume index (SVI) was also improved, reaching 54 mL/g at the end of operation, and it is believed that the application of a short settling time contributed to the improvement of settleability.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권5호
• /
• pp.238-246
• /
• 2002

Utilities are trying to install the equipment of high quality to avoid deterioration of supply reliability. In addition, many sectionalizing switches which can decrease the total outage value for a fault are installed for the same reason. Therefore, utilities are interested in stun dards and criteria for installing switches to optimize the total cost on distribution systems. The affect of sectionalizing switches installed on distribution feeder is gradually decreased because the failure rate on distribution feeder is decreased. Also the automation for distribution systems is widely applied for the efficient operation. Therefore, the renewal for installation standards of sectionalizing switches Is required to reflect the current operation situation. The variable data is used to consider the KEPCO's real situation of distribution feeder as follows; the feeder capacity, connecting rate, feeder length, failure rate of distribution feeder, the failure rate of switches, perception time of feeder fault, the restoration time for a faulted section, the transfer time to other feeders, and the switching time. In this study, We propose equations which can determine the number of sectionalizing switches for minimizing the outage and switch installation cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.70-73
• /
• 2002

Utilities are trying to install the equipment of high quality to avoid deterioration of supply reliability. In addition, many sectionalizing switches which can decrease the total outage value for a fault are installed for the same reason. Therefore, utilities are interested in standards and criteria for installing switches to optimize the total cost on distribution systems. The affect of sectionalizing switches installed on distribution feeder is gradually decreased because the failure rate on distribution feeder is decreased. Also the automation for distribution systems is widely applied for the efficient operation. Therefore, the renewal for installation standards of sectionalizing switches is required to reflect the current operation situation. The variable data is used to consider the KEPCO's real situation of distribution feeder as follows; the feeder capacity, connecting rate, feeder length, failure rate of distribution feeder, the failure rate of switches, perception time of feeder fault, the restoration time for a faulted section, the transfer time to other feeders, and the switching time. In this study, We propose equations which can determine the number of sectionalizing switches for minimizing the outage and switch installation cost.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.185-192
• /
• 2012

노선 계획이란 수요를 만족시키면서 열차 운행 비용(operation cost)을 최소화하는 시종착별 열차 운행횟수를 결정하는 과정을 말한다. 그러나 화물 수송의 경우 화물 취급역에서 발생하는 화물의 연결 혹은 해방 작업은 상당한 시간을 필요로 하여, 잦은 중간 화물역에서의 연결 해방 작업은 수송 서비스의 품질을 저하시킬 수 있으므로, 여객 열차의 노선 계획과 달리, 화물 열차 노선 계획에서는 각 열차의 도중 입환역을 어떻게 설정할 것인가가 매우 중요한 문제이다. 본 연구는 열차의 운행 경로, 운행 횟수뿐만 아니라 열차별 도중 입환역를 포함하는 노선계획을 작성하기 위한 최적화 모형을 제시하고, 이 모형에 대한 열생성 기반 해법 및 실험결과를 제시할 것이다.

• 대한두경부종양학회지
• /
• 제19권1호
• /
• pp.3-8
• /
• 2003

Background: Surgical management of recurrent pleomorphic adenoma of the parotid gland has a considerable risk of facial nerve injury and a high re-recurrence rate. To obtain more insight into the issue of recurrent pleomorphic adenoma and more specifically to evaluate our experience and results of treatment, a retrospective study was carried out. Materials and Methods: During the period from 1989 to 2002, the medical records of 14 patients who underwent a operation for recurrent pleomorphic adenoma of the parotid gland were reviewed retrospectively. The initial operation for parotid tumor, clinical features of recurrence, reoperation after recurrence, po stop complication were analysed. Results: The male to female ratio was 6 : 9. Median age of the patients at the time of the initial operation was 33 years and at the time of the reoperation was 43 years. The median interval until recurrence was 105 months (6-252 months). The initial operations performed were excision or enucleation in 10 patients, superficial parotidectomy in 3 patients, total parotidectmy in 1 patients. The thirteen patients were underwent reoperation (8 superficial parotidectomies, 3 total parotidectomies, 1 neartotal parotidectomy, 1 wide excision). The facial nerve paralysis after the reoperation occured in 6 patients but all of them were recovered from 3 months to 1 year after surgery. Conclusion: In the management of pleomorphic adenoma of the parotid gland, excision or enucleation is to be avoided due to the higher recurrence rate and superficial or total parotidectomy with preservation of the facial nerve are to be preferred. Because the risk of facial nerve injury during operation for the recurrent tumor was higher than initial surgery, more careful surgical procedure is mandatory for preserving the facial nerve.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.695-702
• /
• 2009

Dynamic behavior of Libr-water absorption system using low-temperature hot water was investigated numerically. Thermal-hydraulic model of single-effect/double-lift 100 RT chiller was developed by applying transient conservation equations of total mass, Libr mass, energy and momentum to each component. Transient variations of system properties and transport variables were analysed during start-up operation. Numerical analysis were performed to quantify the effects of bulk concentration and part-load operation on the system performance in terms of cooling capacity, coefficient of performance, and time constant of system. For an absorption chiller considered in the present study, optimum bulk concentration was found to exist, which resulted in the minimum time constant with stable cooling capacity. COP and time constant increased as the load decreased down to 40%, below which the time constant increased abruptly and COP decreased as the load decreased further.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1123-1134
• /
• 2020

The goal of this study was to develop an accelerated life test for an implement working pump for an agricultural tractor. The field experiments were conducted to measure the load of an implement working pump during major agricultural operations such as plow tillage, rotary tillage, baler operations, and wrapping operations. The measurement system for an implement working pump load was constructed using a pressure sensor, the engine rotational speed, and the hitch pump displacement. The measured implement working pump load was calculated as an equivalent load for each agricultural operation using the Palmgren-Miner rule, which is a cumulative damage method. The equivalent load was calculated using the total load data and peak load data when the total data included the operation of an implement working. The annual usage time of the agricultural tractor was applied to develop two integrated equivalent loads. The acceleration factor was calculated to develop an accelerated life test and was calculated from the two integrated equivalent loads, the maximum pressure, and the flow rate conditions of the hitch pump. In Korea, the warranty life of a tractor is 2,736 hours, and the time required for the test to guarantee the operational life of tractors was calculated as 7,561 hours. The acceleration factors were calculated as 453.6 and 38.3, respectively, from the total load data and peak load data. The fatigue test time can be shortened by 16.7 and 197.4 hours according to the result of the acceleration factors.

• 한국임상수의학회지
• /
• 제40권6호
• /
• pp.438-444
• /
• 2023

The aim of this study was to analyze the learning curve of a low-volume veterinary surgeon for laparoscopic salpingectomy of Asiatic black bear. A total of 66 Asiatic black bears (Ursus thibetanus) were presented for sterilization using laparoscopic salpingectomy. These 66 bears were divided into three groups of 22 bears according to the order of surgery (A, B, and C groups, 22 bears per group). One veterinarian performed laparoscopic salpingectomy. There was no significant difference in age, body weight, or crown-rump length between groups. The hazard of completion for salpingectomy by 5 minutes was higher (p < 0.0001) in B and C groups than A group, whereas the hazard was not significant different between B and C groups. The factor that affected the hazard of completing salpingectomy by 5 minutes was heart rate, not age or weight. Operation time was 12.61 ± 8.04 minutes for group A, 5.35 ± 4.38 minutes for group B, and 2.80 ± 1.16 minutes for group C. The operation time for salpingectomy shortened over time. However, significant difference in operation time was present only between groups A and C (p = 0.001). The operation time for laparoscopic salpingectomy decreased rapidly for the first 7 bears (p < 0.05). It then decreased gradually until the 66th case. Operation time of laparoscopic salpingectomy was significantly decreased and stabilized after 33 cases (p < 0.05). As a result, the number of bears required for a low-volume veterinary surgeon to be proficient in laparoscopic salpingectomy is 33 or more.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.530-535
• /
• 1999

In recently, annealing process of cold rolled sheet tend to change to continuous annealing process for improving quality, saving yield. In the meantime as demand for various kind and small lot of products has been increasing, batch annealing has been appreciated for its small restriction for the operation. So, we tested on the effect for the proper heating temperatures, heating time of cycle, cooling time and total cycle time in this annealing process of hi tensile strength steel for automobile. As a result of several investigation. we confirmed for the following characteristics; In this process, we knew that 68$0^{\circ}C$ is suitable for this heating temp. cycle heating time of 38 Hr, cooling time of 31 Hr and total cycle time of 70 Hr. Still more, we could know that it is proper for cold rolling before annealing to be managed by 7 pass because of the act on high pressure.