• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.73-81
• /
• 1987

This investigation was carried cut to obtain the reeling water conditions in Korea. The analyzed items of water were pH, colority, turbidity, acidity, alkalinity, solids electric conductibity hardness and heavy metal ions. About 40% of the reeling water were found to be agreeable, 30% were acceptable provided with some quality control and the others were out of acceptable range mainly based on the M-alkalinity, acidity, pH and total hardness. It was found that there was a following relationship between total hardness and electric conductibity with the relative correlation coefficient r=0.9145. y=15.967+0.22774x Where x, y are electric conductivity and total hardness respectively.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.179-183
• /
• 2007

This study was carried out to evaluate water quality based on physicochemical properties, including ammonium nitrogen ($NH_3-N^+$), nitrate nitrogen ($NO_3-N^-$), consumption of $KMnO_4$ and microbial indicators, such as total colony counts and total surveyed a group of 30 samples three times in 2005 (January to March, July to September, October to December). The mean concentration values of ammonium nitrogen ($NH_3-N^+$), nitrate nitrogen ($NO_3-N^-$) and the consumption of $KMnO_4$, were 0.01 mg/L (range 0.00~0.09 mg/L), 0.48 mg/L (range 0.00~3.31 mg/L) and 0.61 mg/L (0.0~3.42 mg/L), respectively. Based on the results, total colony count was detected in the ranges of 0~412 CFU/mL. In details, 84.4% of test samples was ${\leq}30CFU/mL$, 10.0% was 30~100 CFU/mL and 5.6% was ${\geq}100CFU/mL$. The detected rate of total coliforms was 6.6%. In conclusion, the ground water quality of 30 military facilities in Seoul, Kyunggi-do, and Inchon-city was acceptable for drinking except for a few detection of total colony count and total coliforms over standard.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.418-421
• /
• 2007

For Shock obsorber piston led is launched to the market through luring, milling, grooving, rolling, inspection and finally packing processes, To this time around 11 items, that is, out diameter and length etc..for the piston lod are inspected strictly as a total inspection. Piston Lod is being produced 30,000 a day and its excessively repeating inspection is getting induce repetition strain injury and reduce production rate as fatigue accumulation of worker increase inspection errors. Therefore, for the inspection process is severely needed a progressive improvement through the automation. In this study, we consider automation method of piston led inspection process and suggest an efficient automation strategy as improving the various problems in present manual inspection way.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.269-277
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceding/succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing/assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit (AOQL) are suggested.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.1-16
• /
• 1997

In this paper, we illustrate how to design screening inspections for minimizing a total quality costs in a multi-stage manufacturing systems. The total quality cost model consists of inspection costs, internal failure costs, external failure costs, and Taguchi's loss function. Although, the use of automatic test equipment such as machnie vision and CMM has greatly increased inspection speed and accuracy, screeing(100% inspection) could be considered only as a short-term method to remove nonconforming items from a population, not for a long-term quality improvement. However, screeing should be used for certain situations such as before costly operations and after unsatisfied operations. This paper ends with an example that demonstrates the usefulness of the model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.119-125
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding / succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing / assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit(AOQL) are suggested.

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.41-48
• /
• 2016

In this manuscript, a modified single sampling plan is proposed for the inspection of products in which the nonconforming items can be classified in to two categories namely critical and non-critical; and explained with the help of industrial example. The operating procedure of this plan is also proposed and the performance measures such as the probability of acceptance, average sample number, average total inspection and average out going quality are also derived. The optimal parameters are determined which will have minimum sample size. The efficiency of the proposed plan is also discussed over the conventional single sampling plan. The extensive tables for selecting a modified single sampling plan based on AQL and LQL are provided for both Binomial and Poisson distributions and explained with the help of industrial data.

• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.65-77
• /
• 1993

Often in a production process, the quality of items is serially dependent. We assume that the quality of items is an attribute which can be classified as good or bad with a Markovian dependence structure. In order to determine sampling inspection plan characteristics such as total inspection cost and average outgoing quality, we design an economic model and illustrate an efficient procedure for design of best inspection plan using graphs based on numerical calculations.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.169-185
• /
• 2003

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.74-89
• /
• 1995

In recent years, the safety of customers and the demand for rights to be protected from the risk have become stronger than ever day by day, and the function concerning product liability(PL) and quality assurance(QA) has been emphasized. Basically these functions can be obtained by inspection and there is the single rectifying sampling inspection for attribute (KSA-3105) as an existing method. But we can not say this method is good enough because of limitations in the range of applications and the approximate design of inspection methods which can not meet the rapidity and accuracy of quality information transfer according to the maturity of information period. Therefore, in this paper, a new algorithm is developed which can design the accurate inspection method by using the linear cost function that has not been considered in the existing inspection methods. Also in addition to this, a optimal rectifying sampling inspection plan, contributing to minimize the total costs, can be developed by programming the algorithm developed in this study and it can be applied to any field having many processes almost limitlessly.