• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.317-333
• /
• 2007

The Round-Robin Test (RRT) for ground response analysis was performed by Division of Geotechnical Earthquake Engineering of Korean Geotechnical Society. This research analyzed the influence of analysis methods on variation of ground response by using the results of this RRT. The analysis methods include equivalent linear analysis, non-linear analysis and effective stress analysis. A total of 5 teams among 12 teams applied two kinds of analysis methods. This research compared the results of these 5 teams and analyzed the variation of the results according to analysis methods. The compared results were shear stress-shear strain relation, transfer function, time history and the response spectrum of ground surface acceleration, peak ground acceleration, peak shear strain and maximum excess pore pressure ratio.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.389-401
• /
• 2022

This study investigated the flowability and mechanical properties of cost-effective steel fiber reinforced ultra-high performance concrete (UHPC) by using locally available materials for field-cast application. To examine the effect of mixture constituents, five mixtures with different fractions of silica fume, silica powder, ground granulated blast furnace slag (GGBS), silica sand, and crushed natural sand were proportionally prepared. Comprehensive experiments for different mixture designs were conducted to evaluate the fresh- and hardened-state properties of self-consolidating UHPC. The results showed that the proposed UHPC had similar mechanical properties compared with conventional UHPC while the flow retention over time was enhanced so that the field-cast application seemed appropriately cost-effective. The self-consolidating UHPC with high flowability and low viscosity takes less total mixing time than conventional UHPC up to 6.7 times. The X-ray computed tomographic imaging was performed to investigate the steel fiber distribution inside the UHPC by visualizing the spatial distribution of steel fibers well. Finally, the tensile stress-strain curve for the proposed UHPC was proposed for the implementation to the structural analysis and design.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.840-844
• /
• 2012

Roll forming process is a sheet metal forming process where the forming occurs with rolls in several steps, often from an undeformed sheet to a product ready to use. And each pair of forming rolls installed in a forming machine operates a particular role in making up the required final cross-section. This process used to many industry manufactures and recently apply to automotive industry. This study, FEM simulation applied bumper reinforcement using SHAPE-RF software and analyzed about total effective strain, longitudinal strain, thickness according to the roll-pass.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.215-222
• /
• 2001

Uncertainty study of shear strength characteristics of the marine clays was carried out based ell In-situ tests and laboratory tests on tile south-east coastal region of the Korean peninsula. Theoretical analyses were studied using both tile spherical cavity expansion theory in finite soil mass and the strain path method to determine tile cone factor using the undrained shear strengths obtained by in-situ tests, and the empirical methods in accordance with the ultimate resistance theory were also discussed. Analysis show that the empirical methods suggest more reasonable value than that of theoretical methods in terms of comparing the cone factor estimated using linear regression and frequency distribution analyses. The cone factors obtained by the empirical methods are 18, 15, and 6 respectively, from the results of total cone resistance, effective cone resistance, and excess porewater cone resistance method, and the estimated were similar to those of previous researcher's.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.376-379
• /
• 2014

During roll forming a sheet metal is continuously and progressively formed into a product of the required cross-section and longitudinal shape. An example product is a circular tube with a required diameter, wall-thickness and straightness. Roll forming occurs by passing the sheet through a series of forming rolls that are arranged in tandem. Each pair of forming rolls in the roll forming line plays a particular role in obtaining the required cross-section and longitudinal shape in the product. In recent years, that process is often applied to car body parts by automotive industries. In the current study, an optimal model design and proper roll-pass sequences as well as the number of forming rolls and bending angles were used to produce a sill side. The effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.233-239
• /
• 2012

Hematological analysis can provide crucial information for monitoring the health of fish. However, there is no current information available regarding hematological changes in olive flounder following infection by Vibrio scophthalmi. In this study, hematological and biochemical alterations were determined in olive flounder infected by the high virulence strain (HVS) and low virulence strain (LVS) of V. scophthalmi. Survival in serum, skin mucus, and macrophages of olive flounder was also compared between the HVS and LVS. The results demonstrated that the hematocrit value in infected fish declined from 23.4% at 0 h to 18.0% at 168 h post infection. The total protein concentration in fish infected with the HVS was significantly higher than in fish infected with the LVS and a non-infected control. Lysozyme activity was significantly different between infected and control fish. The HVS survived in serum and cell numbers increased substantially, while cell numbers of the LVS in serum decreased. These changes in hematological characteristics in fish infected by V. scophthalmi can be used as an effective and sensitive index to monitor the physiological and pathological conditions of fish. The survival and reproduction of V. scophthalmi in host serum, skin mucus, and macrophages play a major role in systemic infection and can serve as a virulence indicator for different strains.

• International Journal of Oral Biology
• /
• v.41 no.4
• /
• pp.199-208
• /
• 2016

The aim of this study was to identify the non-Aggregatibacter actinomycetemcomitans bacteria grown on the tryptic soy-serum-bacitracin-vancomycin (TSBV) medium, an A. actinomycetemcomitans selective medium. A total of 82 unidentified bacterial isolates from the oral cavities of a Korean population were kindly provide by the Korean Collection for Oral Microbiology. All the clinical isolates were grown on TSBV medium and bacterial DNA purified from each isolate was subjected to PCR with universal primers specific for bacterial 16S rRNA genes (16S rDNAs) sequence. The each bacterial 16S rDNA was amplified by PCR and the nucleotide sequences of it was determined by the dideoxynucleotide chain termination method. They were identified by 16S rDNA sequence comparison method at the specie-level. The data showed that Neisseria spp. (42 strains), Fusobacterium spp. (10 strains), Capnocytophaga spp. (8 strains), Propionibacterium acnes (5 strains), Aggregatibacter aprophilus (4 strains), Campylobacter spp. (5 strains), Veillonella dispar (3 strains), Streptococcus sp. (1 strain), Haemophilus parainfluenzae (1 strain), Leptotrichia wadei (1 strain), Morococcus sp./Neisseria sp. (1 strain), and Staphylococcus sp. (1 strain) were identified. These results could be used to develop a new A. actinomycetemcomitans-selective medium which is more effective than the TSBV medium in future studies.

• Journal of Environmental Science International
• /
• v.20 no.8
• /
• pp.1021-1030
• /
• 2011

The objective of this study was to assess improvements caused by chitosan, sericin and collagen peptide extract complexes (1:1:1, w/w/w, CSC-F-005) in lipid concentrations in the sera of dyslipidemic rats (SD strain) fed on experimental diets for 5 weeks. Serum concentrations of total cholesterol, HDL-cholesterol, ratio of HDL-cholesterol concentration to total cholesterol, atherosclerotic index, LDL-cholesterol, free cholesterol, cholesteryl ester, triglyceride, phospholipid and blood glucose were effective on the metabolic regulation of dyslipidemic rats. The activities of alkaline phosphatase, aspartate aminotransferase and alanine aminotransferase in serum were remarkably lower in the extract complexes (CSC-F-005) than in the dyslipidemic model. From the above results shows that CSC-F-005 extract complexes were effective on the improvement of the lipid metabolism in sera of dyslipidemic rats.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.561-564
• /
• 2004

In this study, the properties of autogenous shrinkage and dry shrinkage for high performance concrete using Type I and Type IV cement were discussed. According to experimental results, autogenous shrinkage of SN30(the high performance concrete using type I cement) shows values higher than SL30( the high performance concrete using type IV cement). But the dry shrinkage of SN30 is almost the same as SL30. It is observed that the total shrinkage strain of SN30 is higher than that of SL30, because the ratio of autogenous shrinkage of the total shrinkage is relatively large. Therefore, SL30 is more effective to control or minimize the cracking of the high performance concrete, compared with SN30.

• Geomechanics and Engineering
• /
• v.11 no.6
• /
• pp.805-820
• /
• 2016

A fully coupled non-linear effective stress response finite difference (FD) model is built to survey the counter-intuitive recent findings on the reliance of pore water pressure ratio on foundation contact pressure. Two alternative design scenarios for a benchmark problem are explored and contrasted in the light of construction emission rates using the EFFC-DFI methodology. A strain-hardening effective stress plasticity model is adopted to simulate the dynamic loading. A combination of input motions, contact pressure, initial vertical total pressure and distance to foundation centreline are employed, as model variables, to further investigate the control of permanent and variable actions on the residual pore pressure ratio. The model is verified against the Ghosh and Madabhushi high acceleration field test database. The outputs of this work are aimed to improve the current computer-aided seismic foundation design that relies on ground's packing state and consistency. The results confirm that on seismic excitation of shallow foundations, the likelihood of effective stress loss is greater in deeper depths and across free field. For the benchmark problem, adopting a shallow foundation system instead of piled foundation benefitted in a 75% less emission rate, a marked proportion of which is owed to reduced materials and haulage carbon cost.