• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.722-729
• /
• 2004

To analysis on the degradation of the satellite communication signal due to Asian dust that appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency bands of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in Icheon, Korea. The measured EIRP values were compared to the total dust density and dust particle distribution that were measured using PM 10 and OPC by the Korea Meteorological Administration, and the possible correlation between three sets data were analyzed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.131-142
• /
• 2015

This study investigated physicochemical and optical characteristics for three episodes of Asian dust, stagnant haze and long-range transport haze and for one clean day. $PM_{10}$ mass concentration during Asian dust and two haze days was increased by 2~9 times compared to that of clean episode. During Asian dust episode, coarse particle concentration was increased and the mass concentration of calcium in a coarse mode ($1.8{\sim}10{\mu}m$) was $5.4{\mu}g/m^3$ which was 7 times higher than that of clean episode. The calcium was presented as a form of $CaCO_3$ in a coarse mode. During the two haze episodes, fine particle (< $1.8{\mu}m$) concentration was increased and secondary inorganic pollutants such as sulfate, ammonium and nitrate composed of 90% of the total ions. $(NH_4)_2SO_4$ and $NH_4NO_3$ were dominant in a fine mode for stagnant haze episode. But they were the most dominant form in both fine mode and coarse mode for long-range transport haze episode. According to the optical properties for each episode (Asian dust, stagnant haze and long-range transport haze) were classified as dust, black carbon and mixture, respectively.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.77-83
• /
• 1971

In order to find out the decomposing factors of Sumithion in mineral diluents, the physical and chemical properties of the diluents such as talcs, bentonites, diatomaceous earth and other clay minerals was studied in relation to the decomposition rate of Sumithion in dust formulations. The total base, moisture adsorption capacity, pH, specific surface, water contents, active $Fe^{++}$, ignition loss and cation exchange capacity were analysed as the properties of mineral diluents, and these properties were correlated with the stability of Sumithion in dust formulations. And in hope of finding out the main factors among those properties of diluents, the decomposed products of Sumithion in dust formulations prepared with standard Sumithion were separated by the methods of column chromatography and investigated by thin layer chromatography. The following results were otbained; 1. The total base, moisture adsorption capacity, specific surface, water contents, active $Fe^{++}$ and cation exchange capacity of mineral diluents were found to be highly effective on the rate of decomposition of Sumithion in dust formulations. 2. Decomposed products of Sumithion in dust formulations were found to be dimethylphosphorothionate, 3-methyl-4-nitro phenol and its derivatives. And one fraction was not dissolved in n-hexane and ethylether, but was soluble in methylalcohol and ethylalcohol. 3. The moat highly correlated properties of diluents with the decomposition rate of Sumithion in dust were found to be the total base and water contents. 4. In regard to the kind of diluents, it was found that the rate of decomposition of Sumithion in dust formulations was higher in order of bentonite, diatomaceous earth, kaolin and talc.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.613-622
• /
• 2012

A pilot-scale pulse-jet bagfilter was designed, built and tested for the effects of four operating conditions (filtration velocity, inlet dust concentration, pulse pressure, and pulse interval time) on the total system pressure drop, using coke dust from a steel mill factory. Two models were used to predict the total pressure drop according to the operating conditions. These model parameters were estimated from the 180 experimental data points. The empirical model (EM) with filtration velocity, areal density, inlet dust concentration, pulse interval time and pulse pressure shows the best correlation coefficient (R=0.971) between experimental data and model predictions. The empirical model was used as it showed higher correlation coefficient (R=0.971) compared to that of the Multivariate linear regression(MLR) (R=0.961). The minimum pulse pressure predicted by empirical model (EM) was 5kg/$cm^2$.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.88.2-88.2
• /
• 2011

The far-ultraviolet (FUV) continuum and spectral images of C IV and H2 emission lines for the region of Orion-Eridanus Superbubble (OES) are hereby presented and compared with the maps obtained in other wavelengths. While the region shows complex structures, consisting of hot gases and cold dust, a close examination reveals that the FUV emission in this region can be understood reasonably as the result of their interactions. We confirm the origin of most diffuse FUV continuum to be starlight scattered by dust, but we also find that the ionized gas also contributes 50-70% of the total FUV intensity in the regions of H_alpha arcs. We note the bright diffuse FUV continuum in the eastern part of the northern dust-rich region, and attribute it to the bright early-type stars more abundant in this region than in the west as the amount of dust itself does not seem to be much different across 'arc A' that separates the two regions. In addition, two P Cygni-type stars are identified in this eastern region and their peculiar spectral profiles around the C IV emission line are anifested in the scattered diffuse spectrum. Besides this, the C IV emission is generally enhanced at the boundaries of the hot X-ray cavities where thin dust regions are located, confirming the thermal interface nature of the origin of this cooling emission line. The morphology of the H2 emission shows a general correlation with dust extinction features but its intensity peaks are rather located in thin dust areas, off the peak dust regions. Furthermore, H2 emission is seen to be weak in the arc A region though the arc passes through the center of the dust-rich area. Hence, the H2 emission and dust features, together with those of X-ray and ion lines emissions, show stratified structure of arc A quite well, again confirming its thermal interface nature.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.50-66
• /
• 1998

This study was conducted to estimate crystalline silica contents in airborne respirable dust from various manufacturing industries and to compare analytical performance of two methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy (FTIR). For this study, various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: foundry, brick, potteries, concrete, and abrasive material, etc. Both personal and area respirable dust samples were collected using 10 mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size, polyvinylchloride (PVC) filters as collection media. In addition, total dust samples were collected side-by-side to the respirable samples. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 0500, 7500, and 7602 for dust collection and quartz analysis. In addition, bulk samples were collected and analyzed by X-ray fluorescence (XRF) for minerals. In this article, only the results obtained from foundry are reported. The results from various other industries will be published in future articles. The respirable dust concentrations from personal samples by cyclone were $0.46-1.06mg/m^3$ and those from area samples were $0.34-0.73mg/m^3$. Dust concentrations of personal samples were significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. Total dust concentration ranged $1.24-3.40mg/m^3$. The mean quartz contents estimated by FTIR and XRD in the personal respirable dust samples were 5.12% and 4.41%, respectively, without significant difference between them. For quartz analyses, the two techniques were highly correlated with $r^2$ ranged 0.803-0.920. But the results by FTIR were mostly higher than those by XRD. In addition, cristobalite was not detected by FTIR. Significant correlations between contents of crystalline silica and such minerals as $Al_2O_3$, CaO, $TiO_2$, and $K_2O$ suggest possible interferences from these minerals.

• Korean Journal of Adult Nursing
• /
• v.16 no.4
• /
• pp.617-625
• /
• 2004

Purpose: The purpose of this study was to investigate the effect of the asthma management educational program given to the allergic asthmatics receiving immunotherapy due to house dust mite on the disease related to knowledge, stress, and self-efficacy. Method: The subjects of this study were the patients received immunotherapy to house dust mite at a week interval after being diagnosed for house dust mite allergic asthma at the respiratory center of a hospital affiliated to the university. They were divided into the experimental group of 29 patients who received asthma management education, the control group of 32 patients, and 61 patients in total. Experimental treatment, as an asthma management educational program, was the group education of one time and the reinforcement education of three times with environmental therapy and immunotherapy to house dust mite. Results: The results revealed that the improvement in disease related knowledge, the improvement in self-efficacy and the decrease in stress, were significantly higher in the experimental group than the control group. Conclusions: The asthma management educational program had an effect on improving the disease related knowledge and self-efficacy, and decreasing the stress of the patients asthmatics allergic to house dust mite.

• Particle and aerosol research
• /
• v.14 no.3
• /
• pp.73-80
• /
• 2018

Recently, there has been much research on the effect of ultrafine dust on human body with increasing interest in the ultrafine dust. In the Republic of Korea, there are many old thermal power plants, and the amount of ultrafine dust emitted from the thermal power plants is reported to be about 14% of the total amount of domestic fine dust. Therefore, the amount of fine dust from the flue gas desulfurization facility in the thermal power plant needs be reduced. In this study, we made an experimental setup to simulate a flue gas desulfurization facility and analyzed the physical characteristics of the particles passing through a mist eliminator. Experiments were carried out to investigate the collection efficiency of the mist eliminator by using the Arizona Test Dust in a dry environment, and then spraying limestone slurry into the flue gas desulfurization system equipped with the mist eliminator to examine the size and morphology of limestone particles upstream and downstream of the mist eliminator. Cut-off size of the mist eliminator was formed at about $6{\mu}m$. The result of this study is expected to be helpful for designing an electrostatic precipitator for removing particles passing through the mist eliminator.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.409-417
• /
• 2020

Investigation was carried out to assess the effect of cement dust deposition on the physico-chemical properties of soil near some cement plants in Jaintia Hills, Meghalaya. Soil samples were collected and analysed and compared with the control site. Comparison of various soil physico-chemical parameters revealed that cement dust emanating from cement plants has changed the soil quality in the surrounding areas of cement plants. The normal soil pH in the area is generally acidic. However, due to the continuous deposition of cement dust soil pH was found slightly alkaline near the cement plants. The higher values of soil parameters such as electrical conductivity and bulk density were also noticed near the cement plants. However, lower values of water holding capacity, soil moisture content, soil organic carbon and total nitrogen content were found compared to the control sites. The effect of cement dust deposition on soil is more in areas nearer to the cement plants. At present the changes may not be so serious but if this trend continues, soil properties of a vast area around the cement plants are likely to change leading to multiple effects on flora, fauna and socio-economy of the area.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.445-455
• /
• 2020

Fine dust is one of the most critical environmental issues in Korea, and the government recognizes the need to establish customized reduction policies based on regional characteristics. Several studies on air pollutants investigate whether factories affect the distribution of fine dust in a particular region. However, understanding the impact of the entire industry sector requires further investigation. This study identifies the impacts of industrial characteristics on fine dust levels of 141 municipalities across Korea in 2016. A total of 23 variables were used, of which 12 referred to industries and 11 to general characteristics of each city. Due to the high correlation between independent variables, partial least squares (PLS) regression models were used. The analysis identified 14 significant variables for PM10 and 13 for PM2.5. Therefore, the results suggest that local industrial characteristics can significantly influence fine dust levels and provide suggestions for establishing customized reduction policies based on local characteristics.