• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.65-77
• /
• 1993

Often in a production process, the quality of items is serially dependent. We assume that the quality of items is an attribute which can be classified as good or bad with a Markovian dependence structure. In order to determine sampling inspection plan characteristics such as total inspection cost and average outgoing quality, we design an economic model and illustrate an efficient procedure for design of best inspection plan using graphs based on numerical calculations.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.335-342
• /
• 2018

Micelle-Enhanced Ultrafiltration (MEUF) is a membrane separation processes that improving ultrafiltration process with the formation of micelles of the surface active agents. Surface active agents are widely used to improve membrane processes due to the ability to trap organic compounds and metals in the treatment of industrial waste water. In this study, surface active agents are used to improve micelle-enhanced ultrafiltration (MEUF) to reduce chemical oxygen demand (COD), total dissolved solid (TDS), turbidity and clogging the membrane in dairy wastewater treatment. Three important operational factors (anionic surface active agent concentration, pressure and pH) and these interactions were investigated by using response surface methodology (RSM) and Box-Behnken design. Results show that due to the concentration polarization layer and increase the number of Micelles; the anionic surface active agent concentration has a negative effect on the flux and has a positive effect on the elimination of contamination indices. pH, and the pressure have the greatest effect on flux. On the other hand, it could be stated that these percentages of separation are in the percentages range of Nano-filtration (NF). While MEUF process has higher flux than NF process. The results have been achieved at lower pressure while NF process needs high pressure, thus making MEUF is the replacement for the NF process.

• Journal of the Korean housing association
• /
• v.22 no.3
• /
• pp.47-57
• /
• 2011

The purpose of this research consists in the process analysis and studying of the Residents-Participated Workshop which aims to improve the environment of common areas at the rental apartments, and also to present the spacial designs for the improved environment. The objects of this research are Susojugong Rental Apartments and total 3 Residents-Participated Workshops were held. The contents of the research are as follows; 1) Background and purposes of resident environmental improvement and associated group of people were examined. 2) Execution of Residents-Participated Workshop programs and the analysis of the process to present the plans of environmental improvement. The results of the research are; 1) representing variety of opinions and the increased sense of participation. 2) possibility of presenting designs initiated by residents through participatory design workshop. 3) improvement of relationships between managerial authorities, specialists and residents. 4) the place of interchange among residents. 5) necessity of assisting workshop tool, Resident-Participated Workshop programs and schedules. Environmentally improved designs which were presented at the workshop have been actually demonstrated at the Rental Apartments of this research. Follow up research on the process of construction, maintenance management of the construction after completion and the full contents should be studied further.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.389-394
• /
• 1993

Die making process is classified into design,manufacturing,polishing,assembly, and performance test. Die polishing is not a machining process by cutting edge of tool, but it is finishing by relative cutting movement under the surface contact between grinding particles and workpiece, and this process comprised 30~40% of total manufacturing hours. However, die polishing process is still performed by the skilled workers. Now a days, it is very difficult to secure skilled workers due to the hardworking environment and this situation will be getting worse in the future which has great difficulty of dies and molds industries.This process has the common problem on the elimination of tedious manual polishing among the tool making industries. Therefore this study is aimed at the development of an automatic polishing attachment which could be attached onthe spindle of CNC machine tool and controlled by the NC program data created by CAD/CAM system. As a result, this study will contribute the realization of automatic fine polishing process and improvement of quality level of dies and molds.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.890-893
• /
• 2000

It is known that about 15 to 40 percent of total design time is spent on retrieving information such as standard parts handbook data, engineering equations, previous designs. This paper describes a knowledge management system for machine tool design. Product structuring, change management, and complex design knowledge management are possible through the developed system. The system can speed up the design process by making necessary data instantly available as it is needed and keeping track of all the relevant design information and knowledge including individual decisions, design intentions, documents, and drawings.

• IE interfaces
• /
• v.8 no.1
• /
• pp.61-78
• /
• 1995

Warehouse planning or design is not a static, one-time activity. To survive in the constantly changing market warehouse design should be a continuous process in which the anticipated requirment are reflected on the current warehouse status. Thus, the goal of warehouse management is to effectively utilize the various warehouse resources to meet the varying customer requirment. This paper presents an engineering framework for warehousing system analysis and design from the perspective of a total system approach. The complexity pertinent to warehousing system analysis and design is first discussed, which mainly come from the interplay among product data, order data, equipment types, operating strategies, and functional specification of the overall system. The understanding of the complexity leads to a general structure and a conceptual design procedure for a warehousing system. The general structure is comprehensive enough to represent most warehousing and flexible enough to accommodate the more sophisticated ones. The conceptual design procedure portrays the high-level interelationships the design issues.

• Journal of Ship and Ocean Technology
• /
• v.9 no.3
• /
• pp.1-13
• /
• 2005

A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) to search for optimized hull form and CFD(Computational Fluid Dynamics) technique. The friction resistance is estimated using the ITTC 1957 model-ship correlation line formula and the wave making resistance is evaluated using a potential-flow panel method based on Rankine sources with nonlinear free surface boundary conditions. The geometry of hull surface is represented and modified using B-spline surface patches during the optimization process. Using the Series 60 hull ($C_B$ =0.60) as a base hull, the optimization procedure is applied to obtain an optimal hull that produces the minimum total resistance for the given constraints. To verify the validity of the result, the original model and the optimized model obtained by the optimization process have been built and tested in a towing tank. It is shown that the optimal hull obtained around $13\%$ reduction in the total resistance and around $40\%$ reduction in the residual resistance at a speed tested compared with that of the original one, demonstrating that the present optimization tool can be effectively used for efficient hull form designs.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• The Korean Journal of Franchise Management
• /
• v.14 no.4
• /
• pp.67-83
• /
• 2023

Purpose: The beauty market is growing rapidly and becoming more competitive as new shops enter the market and offer similar products and services. The way for industries such as beauty shops to succeed in market competition is to understand customer needs and provide a marketing mix appropriate for those needs. Research design, data, and methodology: The survey was conducted for a total of 4 days from October 4 to October 7, 2023, and a total of 2,431 copies were distributed and 463 copies were returned. Excluding 2 copies with insincere responses, 461 copies were used for analysis. The data were analyzed with SPSS 25.0 and SamrtPLS 4.0. Result: Product, price, promotion, people, and physical evidence influence perceived value, but place and process didn't. Product, process, and physical evidence influence reputation, but price, location, promotion, and people didn't. Perceived value influences revisit intention but did not reputation. Reputation influences revisit intention. Conclusions: First, beauty shops must develop beauty services that can satisfy customers' needs. Second, beauty shops must continue to invest in external facilities and interior design. Third, intangible service processes can help the beauty shop's reputation. Fourth, beauty shops need to maintain a balance between price and perceived value so that customers can be satisfied with the service experience.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.39-45
• /
• 2020

In the production process, the buffer acts as a buffer to alleviate some of the problems such as delays in delivery and process control failures in unexpected situations. Determining the optimal buffer size can contribute to system performance, such as increased output and resource utilization. However, there are difficulties in allocating the optimal buffer due to the complexity of the process or the increase in the number of variables. Therefore, the purpose of this research is proposing an optimal buffer allocation that maximizes throughput. First step is to design the production process to carry out the research. The second step is to maximize the throughput through the harmony search algorithm and to find the buffer capacity that minimizes the lead time. To verify the efficiency, comparing the ratio of the total increase in throughput to the total increase in buffer capacity.