• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.98-105
• /
• 2005

Groundwater sampled from 24 tube wells of three districts namely Sherpur, Gaibandha and Naogaon in Bangladesh was appraised for their water quality for irrigation and agro-based industrial usage. All waters under test were slightly alkaline to alkaline (pH = 7.2 to 8.4) in nature and were not problematic for crop production. As total dissolved solid (TDS), all groundwater samples were classified as fresh water (TDS<1,000 mg/L) in quality. Electrical conductivity (EC) and sodium adsorption ratio (SAR) values reflected that waters under test were under medium salinity (C2), high salinity (C3) and also low alkalinity (S1) hazard classes expressed as C2S1 and C3S1. As regards to EC and soluble sodium percentage (SSP), groundwater samples were graded as good and permissible in category based on soil properties and crop growth. All water samples were free from residual sodium carbonate (RSC) and belonged to suitable in category. Water samples were under soft moderately hard, hard and very hard classes. Manganese, bicarbonate and nitrate ions were considered as major pollutants in some water samples and might pose threat in soil ecosystem for long-term irrigation. For most of the agro-based industrial usage, Fe and Cl were considered as troublesome ions. On the basis of TDS and hardness, groundwater samples were not suitable for specific industry. Some water samples were found suitable for specific industry but none of these waters were suitable for all industries. The relationship between water quality parameters and major ions was established. The correlation between major ionic constituents like Ca, Mg, K, Na, $HCO_3$ and Cl differed significantly. Dominant synergistic relationships were observed between EC-TDS, SAR-SSP, EC-Hardness, TDS-Hardness and RSC-Hardness.

• Journal of Korean Society on Water Environment
• /
• v.32 no.3
• /
• pp.297-302
• /
• 2016

Microbial electrochemical technology (MET) has recently been studied to improve the efficiency of a traditional anaerobic digestion (AD). The purpose of this study was to investigate the impact of MET in the system when MET was combined with traditional AD (i.e., AD-MET). Electrodes used in the MET were Cu coated graphite electrodes. They were supplied with a voltage of 0.3 V. AD started to generate methane in 80 days. But AD-MET started to generate methane from the initial operation after the system started. It was observed that AD-MET reached steady state faster and produced higher methane yield than AD. During the steady state, the average daily methane productions in AD and AD-MET were 2.3L/d and 4.9L/d, respectively. Methane yields were 0.07-CH₄/g‧CODre in AD and 0.25L-CH₄/g‧CODre in AD-MET. In AD-MET, the production rates of total volatile fatty acids (TVFAs) and soluble chemical oxygen demand (SCOD) were 0.12 mg TVFAs/mg VS‧d and 0.35 mg SCOD/mg VS‧d, respectively. They were significantly (p < 0.05) higher than those in AD. However, the concentrations of residual TVFAs in both systems were not significantly (p > 0.05) different from each other, confirming that methane conversion in AD-MET was greater than that in AD.

• Journal of Korean Society on Water Environment
• /
• v.36 no.2
• /
• pp.137-147
• /
• 2020

A direct contact membrane distillation (DCMD) was applied to treat strong nitrogenous wastewater of anaerobic digestion supernatant (ADS) and human urine (HU). The ammonia transfer was evaluated in terms of specific ammonia transfer (SAT) value, which is the ratio of total ammoniacal nitrogen divided by the amount of water transferred. The acidification resulted in low SAT values and high quality of produced water. The ammonia transfer control in the acidic condition was stronger for HU than ADS due to higher alkalinity (pH 8.8) and ammonia concentration (5700 mg-N/L) of HU. Acidified HU at pH 4 exhibited a SAT value of 1.64 × 10^-5, which was significantly smaller than the SAT value of 3.00 × 10^-3 for the original HU. The low pH enhanced the water flux for ADS, but HU showed a steep decrease in water flux due to enhanced fouling. It was considered that the fouling intensity in acidic conditions depends on the characteristics of the wastewater source. The major foulants on the MD membrane were NaCl, CaCO₃ and CuSO₄ as recognized by the SEM-EDS. Acidified ADS and HU at pH 4 showed relatively high N content of 8.18 % and 28.03 %, respectively, as organic fouling.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.599-604
• /
• 2006

Nitrogen removal with the combined SHARON (Single reactor system for high ammonium removal over nitrite)ANAMMOX (Anaerobic ammonium oxidation) process using the effluent of ADEPT (Anaerobic digestion elutriated phased treatment) slurry reactor with very low C/N ratio for piggery waste treatment was investigated. For the preceding SHARON reactor, ammonium nitrogen loading and removal rate were $0.97kg\;NH_4-N/m^3_{reactor}/day$ and $0.68kg\;NH_4-N/m^3_{reactor}/day$ respectively. In steady state, bicarbonate alkalinity consumption for ammonium nitrogen converted to $NO_2-N$ or $NO_3-N$ was 8.4 gram per gram ammonium nitrogen. The successive ANAMMOX reactor was fed with the effluent from SHARON reactor. The loading and removal rate of the soluble nitrogen defined as the sum total of $NH_4-N$, $NO_2-N$ and $NO_3-N$ in ANAMMOX reactor were $1.36kg\;soluble\;N/m^3_{reactor}/day$ and $0.7kg\;soluble\;N/m^3_{reactor}/day$, respectively. The average $NO_2-N/NH_4-N$ removal ratio by ANAMMOX was 2.41. Fluorescence in situ hybridization (FISH) analysis verified that Candidatus Kuenenia stuttgartiensis were dominate, which means that they played an important role of nitrogen removal in ANAMMOX reactor.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.519-519
• /
• 2003

We performed a hydrochemical study on a total of 89 bedrock groundwaters collected from preexisting wells (30 to 300 m deep) in the Boeun area. Hydrochemical data showed significant variations in the area, due to varying degrees of anthropogenic pollution. The waters were mostly enriched in Ca and HCO$_3$ but locally contained significant concentrations of anthropogenic constituents in the general order of Cl >NO$_3$>SO$_4$. In particular, about 11% of the examined wells exceeded the drinking water standard with respect to nitrate. We consider that aquifers in the area are locally highly susceptible to the contamination related to agricultural activities. Diagrams showing the relationships between the summation of cations (∑cations) and the concentration of several anions with different origin (natural versus anthropogenic) were used to estimate the relative role of anthropogenic contamination. A good correlation was observed for the relationship between ∑cations and bicarbonate, indicating that water-rock interaction (namely, hydrolysis of silicate minerals) is most important to control the water quality. Thus, we made an assumption that the equivalent of dissolved cations for a water should be equal to the alkalinity, if the chemistry were controlled solely by a set of natural weathering reactions. If we excluded the equivalent quantities of cations and bicarbonate (natural origin) from the acquired data for each sample, the remainder therefore could be considered to reflect the degree of anthropogenic contamination. Finally, we performed a multiple regression approach for hydrochemical data using the ∑cations as a dependent variable and the concentration data of each anion (natural or anthropogenic) as an independent variable. Using this approach, we could estimate the relative roles of anthropogenic and natural processes. Rather than the conventional evaluation scheme based on water quality criteria, this approach will be more useful and reasonable for the evaluation of groundwater quality in a specific region and also can be used for planning appropriate protection and remedial actions.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.36-45
• /
• 1995

Physicochemical environments and phytoplankton community in the nakdong river middle basin were investigated during a period of 1 year from Nov. 1993 to Oct. 1994. The ranges of Physicochemical environment factors in the nakdong river middle basin were $3.6~27.4{\circ}C$ for temperature, 7.1~9.3 for pH, $7.1~12.7mg/{\ell}$for DO, $0.7~2.1mg/{\ell}$ for BOD, $31~52mg/{\ell}$ for alkalinity, $2.101~3.3mg/{\ell}$ for T-N, $0.052~0.099mg/{\ell}$ for T-p, $5.4~92.3mg/m^{3}$ for chlorophyll-a. The number of Phytoplankton was lowest in Jan. that is, 244ce11s/ml and that was highest in Sep. 1201 cells/ml. The increase of dominant genera were correlated with the total nomber of phytoplanktons. Bacillariaceae, chlorophyceae, cyanophyceae, and euglenophlrceae were to 74.5%, 20%, 3.5%, and 2.2% respectively. Bacillariaceae were abundant during all the year round except for Jun, Jul, Aug. Chlorophyceae were plentiful in Jun, Jul, Aug. Tase-and odor-causing algae and filter clogging algae were 72% in Nov. and 93.5% in Jun. They were abundant all the year round except for winter, so they influenced on the treatment of tap water system. They belong to the general asterionella, cyclotella, melosira, nitzschia of bacillariaceae and actinastrum, pediastrum of chlorophyceae. Dominace index was low in winter and high in umber. Diversity index and equitability index were low in summer and high in winter. Therefore, the structure of phytoplankton community of the nakdong river middle basin was different form season to season.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.46-52
• /
• 2007

As flue gas desulfurization (FGD) wastewater contains high concentrations of nitrate and is very low in organic carbon, the feasibility of nitrate removal by autotrophic denitrification using Thiobacillus denitrificans was studied. This autotrophic bacteria oxidizes elemental sulfur to sulfate while reducing nitrate to elemental nitrogen gas, thereby eliminating the need for addition of organic compounds such as methanol. Owing to the unusually high concentrations of dissolved salts $(Ca^{2+},\;Mg^{2+},\;Na^+,\;K^+,\;B^+,\;SO_4^{2-},\;Cl^-,\;F^-,)$ in the FGD wastewater, extensive laboratory-scale and pilot-scale tests were carried out in sulfur-limestone reactors (1) to determine the effect of salinity on autotrophic denitrification, (2) to evaluate the use of limestone for pH control and as source of inorganic carbon for microbial growth, and, (3) to find the optimum environmental and operational conditions for autotrophic denitrification of FGD wastewater. The experimental results demonstrated that (1) autotrophic denitrification is not inhibited up to 1.8 mol total dissolved salt content; (2) inorganic carbon and inorganic phosphorus must be present in sufficiently high concentrations; (3) limestone can supply effective buffering capacity and inorganic carbon; (4) the high calcium concentration may interfere with pH control, phosphorus solubility and limestone dissolution, hence requiring pretreatment of the FGD wastewater; and, 5) under optimum conditions, complete autotrophic denitrification of FGD wastewater was obtained in a sulfur-limestone packed bed reactor with a sulfur:limestone volume ratio of 2:1 for volumetric loading rates up to 400g $NO_{3^-}N/m^3.d$. The interesting interactions between autotrophic denitrification, pH, alkalinity, and the unusually high calcium and boron content of the FGD wastewater are highlighted. The engineering significance of the results is discussed.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.255-261
• /
• 2004

Experiments using ozone are presented for the water purification and wine quality improvement. Advanced oxidation process results reveal water treatment by both ozone and UV radiation increases quality of the takju prepared using a Korean conventional nuruk than with ozone-treatment or convectional method only. Water quality was enhanced by ozone treatment, resulting in 85% reduction of hardness, and 30% increase in total glucose produced due to increased conductivity and biodegradability of water. Although initially decreased slightly due to oxidation of takju, higher than expected ethanol production was observed, with ozone plus UV treatment resulting in 20% higher production compared with other methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.1016-1019
• /
• 1995

This study was conducted to investigate the nutrient composition of hydroponic water dropwort and the effect of blanching condition on ascorbic acid content. Nutrient composition of hydroponic water dropwort of mid harvest on the 30th day was measured in three portions of leaves, petioles and stems, and was compared with that of late harvest on the 40th day. Hydroponic water dropwort was obtained from the Department of Horticultural Science, Seoul National University. The results were as follows. The nutrients content of leaves were significantly higher in ash and ascorbic acid and lower in moisture, crude fat and crude fiber than those of stems and petioles. There was no significant difference in total vitamin A and thiamin contents between three portions. Ascorbic acid content of leaves harvested on the 30th day was the highest, 57mg/100g, and decreased to 18mg/100g in the leaves harvested on the 40th day. Marked increase in crude fiber and vitamin A content of leaves was observed in late harvest may be due to the maturation. The results of nutrient composition analysis suggest that the leaves of hydroponic water dropwort is important in ascorbic acid and ash. It is recommended that shorter blanching time and addition of 0.5% NaCl to the blanching water are better for higher ascorbic acid retention of hydroponic water dropwort. In conclusion, as hydroponic water dropwort has high content in ash, calcium, vitamin and free sugar with alkalinity, leaves as well as stems and petioles can be recommonded as a vegetable of high nutritional quality.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.02a
• /
• pp.29-48
• /
• 2001

일반적인 폐수처리 시 여러 광물들이 사용되는 데 예를 들면, 수산화칼슘 및 탄산나트륨은 중화제, 점토는 응집제, 알룸(alum) 및 염화철은 인 제거제로 사용되고 있다. 산성광산배수인 경우에는 알칼리성의 중화제로 석회 (CaO), 석회석 (CaCO$_3$), 가성소다 (NaOH), 탄산나트륨 (NaCO$_3$) 등이 사용된다. 그러나, 설비비 및 유지비가 많이 들어 몇 십년 동안 계속해서 침출되는 산성광산배수를 처리하기에는 문제가 있다. 산성광산배수 (Acid Mine Drainage, AMD)는 pH가 6.0 미만이고 총산도 (totalacidity)가 총알카리도 (total alkalinity)를 초과하는 물로서 노천광이 가행되었던 지역, 가행중이거나 휴광 또는 폐광된 광산에서 유출된다. 또한 도로사면 절개부나 지하철 터널에서도 황철석(pyrite)이나 백철석 (marcasite)을 함유하는 층이 공기 중에 노출되면 산성수가 침출되어 나오기도 한다. 산성광산배수에 의한 하천수의 오염이 매우 극심하여 때로는 미생물마저도 그 속에 살 수 없게 된다. 산성광산배수에 의해 오염된 하천수의 오염범위는 산성수의 양, 농도, 하천에 유입되는 산성수의 분포, 상류에서 흘러드는 오염되지 않은 물의 양, 지류에서 유입되는 물의 양에 따라 좌우된다. 산성광산배수 오염이 문제시되고 있는 나라는 미국을 포함하여 호주, 일본, 한국, 러시아, 남아연방 등이다. 산성광산배수는 환원환경에서 생성된 석탄층 및 접촉교대 또는 열수에 의해 생성된 금속광이 공기 및 물에 노출되어 생성되는 자연적인 현상이다. 그러나 국지적인 지역에서 인간이 이 광상들을 환경영향을 고려하지 않고 대규모로 개발할 때 인간 생활에 심각한 영향을 미치는 것이다. 광산산성배수를 처리하기 위해 상기와 같이 여러 기술이 도입 적용되었으며 일부 기술들은 현재도 사용되고 있다. 각 기술마다 일장일단이 있으므로 경비의 과다, 유지 및 관리에 대한 지속성 여부, 공간의 확보 여부, 지역적 특수성에 맞춰 가장 적합한 방법을 채택하여야 하며 꾸준히 채택한 기술의 개량 및 새로운 기술의 첨가가 요구되고 있다. 따라서, 산성광산배수 오염지대에 대해 획일적으로 같은 처리방법을 채택하여 사용하는 것보다 각 지역 또는 광산산성폐수가 유출되어 나오는 광산폐기물의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.