• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.69-76
• /
• 1993

The program for the development of linkage system was made and the scissors-type linkage system was designed. The piston temperature distribution under steady state was measured by the linkage system and thermocouple. The effects of engine speed, coolant outlet temperature, and torque on the piston temperature were investigated.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.168-172
• /
• 2005

A novel cogging torque reduction algorithm is presented for 2-pole permanent magnet DC motor. While the shape of the permanent magnet is changed in the conventional method, the pole shape of the magnetizing yoke is optimized in the presented algorithm. In order to parameterize the shape of the yoke, and the distribution of the residual magnetization of the permanent magnet, the Bezier spline is used. The shape of the magnetizing yoke is optimized using the design sensitivity analysis incorporated with the finite element method and Bezier spline.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.58-62
• /
• 1990

Air gap flux density is obtained strictly from air gap permeance and MMF distribution using the design parameter of BLDCM when the stator slot is considered. Then the theoretical equations representing the cogging torque and BEMF are proposed. The effect of skew is described analytically, and skew effect on air gap permeance and MMF is studied. Consequently we verified analytically that skew of slots and magnets influenced on the reduction of the cogging torque and BEMF ripple, and the shape of BEMF.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.292-297
• /
• 1997

The rattle noise is the most significant in many kinds of manual gearbox noises, which is generated at the idle stage of the engine operation. The main torsional vibration source of the driveline is the fluctuation of the engine torque. The gear rattle is impacts generating in the backlash of the free gear due to this torsional vibration. Many researchers reported the clutch torsional characteristic optimization method to reduce the idle gear rattle but only few of them give sufficient consideration to the system parameters like gear backlash, drag torque, system inertia, inertia distribution, engine torque fluctuation, idle engine rotation speed, and accessory load. This paper pays attention to the gear impact mechanism and system design parameters to reduce the idle gear rattle with computer simulation.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.122-124
• /
• 2003

This paper deals with the magnetic field analysis and compution of cogging torque using an analytical method in high speed brushless motor/generator. The magnetic field is analyzed by solving space harmonics field analysis due to magnetizing distribution and the cogging torque is analyzed by combining field analysis with relative permeance.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.65-67
• /
• 2007

This paper proposes a novel flux barrier in q-axis of rotor in IPM type BLDC motor, The proposed flux barrier can reduce cogging torqeu and diminisg torque ripple by sinusoidal waveform distribution of flux generated in the permanent magnet. To determine the optimal shape of the novel flux barrier, we also propose a modified Taguchi method which considering multiple quality characteristics, such as cogging torque, average torque, and efficiency. The proposed design and method were analyzed by using the 2D finite element method (FEM). Results of the proposed model were compared with initial model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.584-590
• /
• 1984

This study is to develop a program, with which the motion of the system can be simulated in view of kinematics and dynamics, and then evaluate functional capabilities of many robots in order to select the most suitable one for any given working conditions. According to the theory of Denavit & Hartenberg, rectangular coordinate is set at each joint in the robot of six joints, as this one is the major concern, and transformation matrices are derived between any two coordinates. The necessary displacement of each joint for executing a given a work is obtained from the position and posture transformation and the in-stantaneous velocity of the joint is got from given velocity distribution of the path. The necessary torque of each joint is finally calculated by Newton-Euler Method. This simulation program is applied to a robot with six rotational joints, Rotational angle and torque to time which has a given motion trajectory are figured and also torque to r.p.m.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.151-160
• /
• 1996

The fatigue test under the constant amplitude repeated loading is performed to investigate the fatigue behavior of the Torque Shear type high tension bolted joint which is able to manage the axial force uniformly. From the test results, it's known that the reduction of the axial force of T/S bolt followed by the elasped time is similar to that of the high tension bolts. The difference of relaxation is not occurred according to the position of bolts, the size of the introduced axial force but the effect of the variation of temperature is large. In the reduction of the axial force followed by the cumulation of the fatigue load, the outer bolt is larger than the inner bolt. This result depends on the difference in the distribution of the non-slip zone. The variation of the surface roughness affects the slip and the reduction of the anal force.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.9-11
• /
• 1999

This paper presents the problems of design and theoretical model of electrostatically driven axial-gap type wobble motor. The motor design benefits from large axial rotor-to-stator overlap and large gear ratios, and motor designs with rotor radii of 50 and $100{\mu}m$ are capable of generating torques in the [nNm] range at high electrostatic fields. Because of the large gear ratio, smaller angular steps and lower rotational speed are obtained, compared to radial-gap motor design. Aspects like gear ratio, torque generation, excitation schemes and torque coverage, normal forces, friction are addressed.

• Journal of Drive and Control
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2017

This study analyzed a life test method for a power take-off (PTO) gearbox. An engine transfers mechanical power (rotation and torque) to a hydraulic pump through a PTO Gearbox with one input shaft and three output shafts. PTO gear box durability under high loads over long time periods was tested using dynamometers. In order to reflect the rated operating conditions, power must be distributed to each output shaft, and experiments were conducted under various conditions to verify the characteristics of the distributed power. An accelerated life test was designed using speed and torque as acceleration factors. Also, efficiency tests were conducted under various load conditions. Also, a lubrication oil composition analysis was performed to analyze gearbox wear status.