• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1146-1155
• /
• 2017

Normally, the artificial intelligence algorithms are widely applied to the optimal controller design. Then, it is expected that the best output performance is achieved. Unfortunately, when resulting controller parameters are implemented by using the practical devices, the output performance cannot be the best as expected. Therefore, the paper presents the optimal controller design using the combination between the state-space averaging model and the adaptive Tabu search algorithm with the new criteria as two penalty conditions to handle the mentioned problem. The buck-boost converter regulated by the cascade PI controllers is used as the example power system. The results show that the output performance is better than those from the conventional design method for both input and load variations. Moreover, it is confirmed that the reported controllers can be implemented using the realistic devices without the limitation and the stable operation is also guaranteed. The results are also validated by the simulation using the topology model of MATLAB and also experimentally verified by the testing rig.

• Steel and Composite Structures
• /
• v.30 no.3
• /
• pp.293-304
• /
• 2019

The optimum cost of a reinforced concrete plane and space frames have been found by using the Genetic Algorithm (GA) method. The design procedure is subjected to many constraints controlling the designed sections (beams and columns) based on the standard specifications of the American Concrete Institute ACI Code 2011. The design variables have contained the dimensions of designed sections, reinforced steel and topology through the section. It is obtained from a predetermined database containing all the single reinforced design sections for beam and columns subjected to axial load, uniaxial or biaxial moments. The designed optimum beam sections by using GAs have been unified through MATLAB to satisfy axial, flexural, shear and torsion requirements based on the designed code. The frames' functional cost has contained the cost of concrete and reinforcement of steel in addition to the cost of the frames' formwork. The results have found that limiting the dimensions of the frame's beams with the frame's columns have increased the optimum cost of the structure by 2%, declining the re-analysis of the optimum designed structures through GA.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2297-2306
• /
• 2015

This paper presents the development of a system with a reverse matrix converter (RMC) for permanent magnet synchronous motor (PMSM) drive and its effective control method. The voltage transfer ratio of the general matrix converter is restricted to a maximum value of 0.866, which is not suitable for applications whose source voltages are lower than the load voltages. The proposed RMC topology can step up the voltage without any additional components in the conventional circuit. Its control method is different from traditional matrix converter’s one, thus this paper proposes control schemes of RMC by means of controlling both the generator and motor side currents with properly designed control loop. The converter can have sinusoidal input/output current waveforms in steady state condition as well as a boosted voltage. In this paper, a hardware system with an RMC for a PMSM drive system is described. The performance of the system was investigated through experiments

• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.277-289
• /
• 2020

This article describes the technology for constructing of a multiply-connected three-dimensional area's finite element representation. Representation of finite-element configuration of an area is described by a discrete set that consist of the number of nodes and elements of the finite-element grid, that are orderly set of nodes' coordinates and numbers of finite elements. Corresponding theorems are given, to prove the correctness of the solution method. The adequacy of multiply-connected area topology's finite element model is shown. The merging of subareas is based on the criterion of boundary nodes' coincidence by establishing a simple hierarchy of volumes, surfaces, lines and points. Renumbering nodes is carried out by the frontal method, where nodes located on the outer edges of the structure are used as the initial front.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.34-43
• /
• 2019

An improved half-bridge LLC converter with a magamp auxiliary post-regulator is proposed in this paper. The function of the magamp is bypassed when the converter works within the low input-voltage range. Meanwhile, it operates as an auxiliary post-regulator when the input voltage is high. By changing the blocking time of the magamp, the dc gain of the converter can be extended. Hence, the input voltage range of the converter is extended. The realization of proposed topology does not require a complicated circuit. The controller of the magamp can be easily implemented using only passive components, transistors and an OP amp. The generalized operational principle is analyzed and the design criterion for the magamp is presented. Finally, a 25V output, 400W experimental prototype was built and tested for a 160-300V input-voltage range to verify the feasibility of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.305-316
• /
• 1998

The impedance matching network with the simplfied real frequency technique (SRFT) is proposed as a method for bandwidth enhancement of microstrip antenna. The validity of the technique is based on the relative frequency insensitivity of the radiation pattern and gain characteristics as compared to the resonant behaviour of the input impedance. The most significant feature of this technique is that there is no need to find any analytical description of the antenna and generator, and it only utilizes directly real frequency generator and load data over the prescribed frequency band. Furthermore, it is not necessary to invent an analytic form of the system transfer function to assume a matching network topology in advance. In this paper, the transmission line model is used to investigate the rectangular microstrip antenna, and based on the Fano's bandwidth-enlargement theory, the SRFT is introduced to design the matching networks of microstrip antennas in order to obtain a constant gain over the frequency band of interest. Two representative microstrip antnnas with different structure are fabricated and tested. From these procedures, it is obtained that the proposed impedance matching networks of microstrip antenna improve the impedance bandwidth nearly three times compared to the antenna without them.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.151-158
• /
• 2002

Automotive engineers involved in a new car project use various CAD systems that are chosen based on work requirements. For example, engineers in Hyundai Motors are using Pro/Designer and Alias fur the style design, but they use CATIA to design parts and assemblies, ANSYS for FEM analysis, and Pro/Engineer to design engines. Because they use different CAD systems, they have difficulties in collaborative design. Data, which contains errors, is transferred between CAD systems. It is difficult to find out such errors in a large CAD model. An evaluation method for CAD models has been developed in this study. This diagnosis tool analyses a STEP or an IGES file generated from a CAD system, and produces a quantitative error report. The tool has been tested with actual data sets. This paper proposes an algorithm that produces mathematical error values of entities of IGES models that have geometrical data, and entities of STEP models that have topological data, and inspects every part off model. To develop this system, we have used the OpenCASCADE kernel, which is an open source kernel developed by Matra Datavision of France.

• Journal of the Korean Home Economics Association
• /
• v.50 no.7
• /
• pp.67-79
• /
• 2012

This study analyzed the characteristics of morphing in fashion design through the documentaries on morphing and fashion. The characteristics of morphing in fine art, media, and design area were categorized as reversible metamorphosis, sequential dissolve and blurring of interpolation boundaries. The results were as follow in fashion design. Reversible metamorphosis showed an automatic silhouette transformation by remote control, the metamorphosis of folding method by wearer's own movements and the automatic silhouette transformation by the air pressurizing method. It represented the thoughts of omnipotence as in the feeling of the magical world, the human desire for control in life, the rationalization of magical thinking and imaginative power, the creation of a new dress space and the extension of dress function. Sequential dissolve showed juxtaposition in the same area by the time order, juxtaposition in virtual space through the computer graphics, the series of fashion photography by steel cut of the dress making process and the blending of digital film and fashion design. It represented the approach for the storytelling of fashion show, implication of creative fashion design process and the creation of organic forms and the feeling of fantasy through artificial technology. The blurring of interpolation boundary showed an overlay of different fabrics with transparent boundaries, an overlay of different patterns with transparent boundaries and the blending of fabrics through the visual mixing of color. It represented the obfuscation of the object, the connotation of the space order, the connotation of the extensive and various meanings and the integrative property of objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.730-735
• /
• 2005

While the E-mail is a important way of fast communication in these days. it is real that the E-mail is often misused as a commercial advertisement method and creates many social problems. Even though various filtering techniques for blocking spam mails have been developed, reliability of mail systems is decreased by misreading normal mails as spam mails, i.e. false-positive errors. In this paper, the SMBC(Spam Mail Blocking Center) platform employing spam mail recovery method based on privacy information is proposed and designed. The SMBC is designed in frame layer based on spam blocking system of proxy sewer and can be physically implemented in various topology so that flexible development with layered module is possible. Using privacy information makes the proposed SMBC platform minimize processing load and false-positive error rates so that it can improve mail system reliabilities.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.119-128
• /
• 2005

Most spatial data handled in GIS is two-dimensional. These two-dimensional data is established by selecting 2D aspects form 3D, or by projecting 3D onto 2D space. During this conversion, without user's intention, data are abstracted and omitted. This unwanted data loss causes disadvantages such as restrictingof the range of data application and describing inaccurate real world. Recently, three dimensional data is getting wide interests and demands. One of the examplesis Database Management System which can store and manage three dimensional spatial data. However, this DBMS does not support spatial query which is the essence of the database management system. So, various studies are needed in this field. This research designs spatial relationship that is defined in space database standard using the three-dimension space model. The spatial data model, which is used in this research, is the one defined in OGC for GMS3, and designing tool is DE-9IM based on Point-Set Topology blow as the best method for topological operation.