• Journal of Trauma and Injury
• /
• v.20 no.2
• /
• pp.57-64
• /
• 2007

Purpose: Clinically, acute respiratory distress syndrome (ARDS) occurs within 72 hours after acute exposure of risk factors. Because of its high fatality rate once ARDS progresses, early detection and management are essential to reduce the mortality rate. Accordingly, studies on early changes of ARDS were started, and serum ferritin, as well the as injury severity score (ISS), which has been addressed in previous studies, thought to be an early predictive indicator for ARDSMethods: From March 2003 to March 2005, we investigated 50 trauma patients who were admitted to the intensive care unit in Dongguk University Medical Center, Gyeongju. The patients were characterized according to age, sex, ISS, onset of ARDS, time onset of ARDS, serum ferritin level (posttraumatic $1^{st}\;&\;2^{nd}$ day), amount of transfused blood, and death. Abdominal computed topography was performed as an early diagnostic tool to evaluate the onset of ARDS according to its diagnostic criteria. The serum ferritin was measured by using a $VIDAS^{(R)}$ Ferritin (bioMeriux, Marcy-1' Etoile, France) kit with an enzyme-linked fluorescent assay method. For statistical analysis, Windows SPSS 13.0 and MedCalc were used to confirm the probability of obtaining a predictive measure from the receiver operating characteristics (ROC) curve. Results: The ISS varied from 14 to 66 (mean: 33.8) whereas the onset of ARDS could be predicted with the score above 30 (sensitivity: 90.0%, specificity: 60.0%, p<0.05). On the posttraumatic $1^{st}$ day, the serum ferritin levels were measured to be from 31 mg/dL to 1,200 mg/dL (mean: 456 mg/dL), and the onset of ARDS could be predicted when the value was over 340 mg/dL (sensitivity: 80.0%, specificity: 65.0%, p<0.05). On the posttraumatic $2^{nd}$ day, the serum ferritin levels were measured to be from 73 mg/dL to 1,200 mg/dL (mean: 404 mg/dL), and the onset of ARDS could be predicted when the value was over 627 mg/dL (sensitivity: 60.0%, specificity: 92.5%, p<0.05). The serum ferritin levels and the ISS were significantly higher on the posttraumatic $1^{st}$ and $2^{nd}$ day in the ARDS group, suggesting that they are suitable indices predicting the onset of ARDS, however relationship between the serum ferritin levels and the ISS was not statistically significant. Conclusion: In this study, we discovered increasing serum ferritin levels in multiple- trauma patients on the posttraumatic $1^{st}$ & $2^{nd}$ day and concluded that both the serum ferritin level and the ISS were good predictors of ARDS. Although they do not show statistically significant relationship to each other, they can be used as independent predictive measures for ARDS. Since ARDS causes high mortality, further studies, including the types of surgery and the methods of anesthesia on a large number of patients are essential to predict the chance of ARDS earlier and to reduce the incidence of death.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.47-60
• /
• 2020

To assess the characteristics of phytoplankton community structures related to environmental factors, seasonal surveys were conducted in the vicinity of Dokdo. In 2019, phytoplankton of four phyla and 69 species were observed. During winter, unidentified nanoflagellates dominated, with an average of 3.19×10⁴ cells L^-1. In spring, unidentified nanoflagellates occupied about 50% of the composition and a variety of dinoflagellates appeared. The summer phytoplankton population showed very low abundance. In autumn, various species of Chaetoceros appeared, along with diatoms, such as Bacteriastrum spp., Guinardia striata, and Pseudo-nitzschia spp. In addition, tropical species Amphisolenia sp. and Ornithocercus sp. were observed in both 2018 and 2019. The diversity was high in the summer of 2018 and the winter of 2019 and the characteristics of each index varied. Cluster analysis was divided into four groups according to species and population characteristics regardless of the season. The stratification of spring was particularly weak. In the autumn of 2018, the water mass was stabilized in the same way as in the summer, which is considered a suitable condition for phytoplankton growth. However, in 2019, the water masses were mixed, resulting in a low population. In a phytoplankton comparison, the dominant group showed seasonal differences, except for summer when the population was low, and the difference was most pronounced in autumn. Therefore, the waters surrounding Dokdo have different environmental and ecological characteristics from the East Sea, but the seasonal characteristics of each year are considered to be different depending on the topography, various currents, the island effect, and other factors.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.52-62
• /
• 2017

Overseas landscape practices have already benefited from the awareness of BIM while landscape-related organizations are encouraging its use and the number of landscape projects using BIM is increasing. However, since BIM has not yet been introduced in the domestic field, this study investigated and analyzed overseas landscape projects and discussed the positive effects and implementation of BIM. For this purpose, landscape projects were selected to show three effects of BIM: improvement of design work efficiency, building of a platform for cooperation, and performance of topography design. These three projects were analyzed across four aspects of implementation methods: landscape information, 3D modeling, interoperability, and visualization uses of BIM. First, in terms of landscape information, a variety of building information was constructed in the form of 3D libraries or 2D CAD format from detailed landscape elements to infrastructure. Second, for 3D modeling, a landscape space including simple terrain and trees was modeled with Revit while elaborate and complex terrain was modeled with Maya, a professional 3D modeling tool. One integrated model was produced by periodically exchanging, reviewing, and finally combining each model from interdisciplinary fields. Third, interoperability of data from different fields was achieved through the unification of file formats, conversion of differing formats, or compliance with information standards. Lastly, visualized 3D models helped coordination among project partners, approval of design, and promotion through public media. Reviewing of the case studies shows that BIM functions as a process to improve work efficiency and interdisciplinary collaboration, rather than simply as a design tool. It has also verified that landscape architects could play an important role in integrated projects using BIM. Just as the introduction of BIM into the architecture, engineering and construction industries saw great benefits and opportunities, BIM should also be introduced to landscape architecture.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.41-51
• /
• 1999

This study was conducted to investigate the effects of local climatic conditions on the annual increment of Korean white pine planted in Gapyung and Yaungdong. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique which makes use of empirical relationships between the topography and the weather in study sites was applied to produce normal estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine. Then, the yearly climatic variables from 1990 to 1997 for each study site were derived from the spatial interpolation procedures based on inverse- distance weighting of the observed deviation from the climatic normals at the nearest 11 standard weather stations. From these estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc., which affect the tree growth, were computed on yearly base for each locality. The deviations of measured annual increments from the expected annual increments for 8 years based on yield table of Korean white pine were then correlated with and regressed on the yearly weather variables to examine effects of local climatic conditions on the growth. Gapyung area provides better conditions for the growth of Korean white pine in the early stage than Youngdong area. This indicates that the conditions such as low temperature, high relative humidity, and large amount of precipitation provide favor environment for the early growth of Korean white pine. A ccording to the correlation and regression an analysis using local climatic conditions and annual increments, the growth pattern of Gapyung area corresponds to this tendency. However, it was found that the relationship between annual increments and local climatic conditions in Youngdong area shows different tendency from Gapyung. These results mean that the yearly growth pattern could not sufficiently be explained by climatic conditions with high variance in yearly weather variables. In addition, the poor growth in Youngdong area might not only be affected by climatic conditions, but also by other environmental factors such as site quality.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.72-89
• /
• 2012

This study aimed to reconsider the theory that the renowned Amisan(峨眉山) terraced garden at north of Gyotaejeon(交泰殿) was artificially made, by reviewing the historical records and drawings. It has been widely accepted that Amisan was made of the digged soil from Gyeonghoeji(慶會池). But several arguments about artificial mountain theory of Amisan that completely not be found in historical records have been raised in this study. The results were summarized as follows; the inherent contradiction in existing opinion, the discordance between the time of building Gyeonghoeji and Gyotaejeon, the existence of the mountain range which connect Baekaksan and Amisan appeared in Dohyeong(圖形), historical documents written in the years of kingdoms of Youngjo(英祖) and Gojong(高宗), a high position seen from Heungbogjeon(興復殿) in the north Amisan through the wall in the east but impassable, an opinion about realization Amisan as geomantic term of Amisa(蛾眉砂) at the time of Gyeongbok Palace reconstruction, and preservation of the mountain range in Gyeongbok Palace that comes from the result of the arguments in main mountain of Gyeongbok Palace in the year of Sejong(世宗). In addition, it was investigated why the slop in the north of Gyotaejeon was named as Aminsan and why the artificial mountain theory is appeared and made a conclusion that the Amisan comes from the change of the pronunciation of the geomantic term "Amisa", and modeling the yijing[意景] of Amisan which is a sacred place of Taoism and Buddhism in Sichuan[四川] of Chinaand the view of construction to mean defeating a spirit of smallpox which had to be cured. And it seems to be a result which retroactively applied the artificial mountain theory of Amisanis the technique of 'constructing mountain with digged pond dirt' to the relationship between Gyeonghoeji and Amisan. The greater part of mountain range which was connecting with Baekaksan and Amisan was seriously disconnected with large scale of exposition by the Japanese colonial period in 1915. But low slope is kept about 70 meters along the trail northeast of Gyotaejeon. Accordingly, it is judged that the range has not been entirely destroyed. And according to the result of elevation analysis, discontinuous slope form certain axis is found, so the mountain range of Amisan is approximately estimated. This basic research about the mountain range of Amisan might provide a critical clue about restoration of topography in Gyeongbok Palace.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.2
• /
• pp.87-97
• /
• 2017

Paulownia species has long been recognized in Korean traditional culture and the values of the species have been researched in various focuses. However, studies on distribution and ecological characteristics of the species are still needed. This study aimed to identify distribution trends and ecological characteristics of two Paulownia species in Busan metropolitan city using the MaxEnt model. The MaxEnt model was established based on the environmental factors such as positioning information of the Paulownia species, topography, climate and degree of anthropogenic disturbance potentiality (ADP), which was collected in the on-site research. The study verified that the accuracy of the model was appropriate as the AUC value of Paulownia coreana and P. tomentosa was 0.809, respectively. In terms of the distribution trends of the two Paulownia species in the research area depending on the distribution model, they were both mainly distributed in downtown where built-up area and bare ground were densely concentrated. The potential distribution area of the two species was identified as $137.4km^2$ for P. coreana and $135.0km^2$ for P. tomentosa. The distribution probability was high in Jung-gu, Dongrae-gu, Busanjin-gu and Yeonje-gu. As a result of the analysis on contribution of the environmental factors, it was turned out that the degree of anthropogenic disturbance potentiality (ADP) contributed to distribution of P. coreana and P. tomentosa by about 50%, and the contribution of the environmental factors had a positive correlation with the degree of ADP. The elevation had a negative correlation with both the two species, which was considered because the species must compete more with native species in natural habitats as the altitude above sea level rises. The research findings demonstrated numerically that the distribution of P.coreana and P. tomentosa depended on artificial activities, and indicated the relevance with the Korean traditional landscape. These findings are expected to provide meaningful information in using, preserving and restoring Paulownia species.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.498-511
• /
• 2012

Mountainous wetland have many species such as II grade endangered species of wild flora and fauna(Drosera rotundifolia) and environmental indicator species(Utricularia racemosa, Habenaria linearifolia, Parnassia palustris, Molinia japonica, etc.). Accordingly, the mountainous wetlands is very important. However, most mountainous wetlands will disappear by natural or artificial aridness processes. Thus, it needs to manage mountainous wetland for protecting from aridness. This study has found out the wetland status of the environmental ecology and aridness processes moreover, it has suggested ways of improving wetland conservation plan and wetland aridness management plan. According to the results of topography structure survey, Hwaeom wetland's altitude is ranged within 750~810m(87.4%), and slope is less than $10^{\circ}$. There was ideally suited mountainous wetland. However, the water supply(1.6 meters depth and 0.8 meters wide) was built on under the wetland. For that reason, there was concerned about the aridness processes by sweeping away peat layer and dropping the water level. The distribution area of hygrophyte was narrowed to 6.7% whereas, woody plants and xerophytic plants was achieved a dominant position. If it leaves the situation as it is, the mountainous wetland will be developed next succession as forest ecosystem. Therefore, in order to sustain the mountainous wetland from aridness, it is set to the base direction of conservation and management as main schemes. Moreover, we have suggested that setting the vegetation conservation and management area which considering a ecological vegetation characteristics, managing the ecotone vegetation, setting the buffer zone for protection of ecological core areas, protecting the mountainous wetland indicator species and designating the management vegetation. In conclusion, in order to sustain and maintain a soundly wetland ecosystem, it needs to several management of wetlands damage factors. 1) suppression of the excessive groundwater to basin, 2) stabilization of wetland via hydrologic storage, 3) suppression of changing and transforming wetland into forest by succession via management of xerophytic plants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.207-216
• /
• 2020

Purpose: To compare the polishing characteristics and their influence on Candida albicans adhesion to the recently introduced polyetherketoneketone (PEKK) and the conventional polymethylmethacrylate (PMMA) denture resin material. Materials and methods: Specimens from PEKK (Group E) and PMMA (Group M) were made in dimensions of 8 mm in diameter and 2 mm in thickness. The specimens were further divided into sub-groups according to the extent of polishing (ER, MR: rough; EP, MP: polished, N = 12 each). The specimens were polished using polishing machine and SiC foil. ER and MR group specimens were polished with 600 grit SiC foil only. EP and MP groups were further polished with 800, 1,000, 1,200 grit SiC foils sequentially. To measure the surface roughness values (Sa) of specimens, atomic force microscope (AFM) was used and scanning electron microscope (SEM) observation under 1,000, and 20,000 magnifications was performed to investigate surface topography. The polished specimens were soaked in C. albicans suspension for 2 hours with shaking to promote adhesion. The attached C. albicans were detached from the surface with 10 times of pipetting. The suspension of detached C. albicans was performed by serial dilution to 10³ times, and the diluted suspensions were inoculated on Sabouraud dextrose agar plates using spread plate method. After incubating the plate for 48 hours, colony forming unit (CFU)/plate of C. albicans was counted. Statistical analysis was performed using one-way ANOVA and Tukey HSD test to confirm significant difference between the groups (α=.05). Results: Average Sa value was significantly higher in MR group compared to other groups (P<.05), meaning that additional polishing steps reduced surface roughness effectively only in the PMMA specimens. There was no significant difference in Sa values between MP and EP groups. In SEM images, PEKK specimens showed numerous spikes of abraded material protruding from the surface and this phenomenon was more significant in EP group. The mean CFU/plate value was the highest in EP group and this was significant when it was compared to MP group (P<.05) which was the lowest. Conclusion: Polishing PEKK using serial SiC abrasive foil may result in higher adhesion of C. albicans. In clinic, this should be considered carefully.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.121-131
• /
• 2008

This study was conducted to delineate temporal and spatial patterns of potential risk of cold injury by combining the short-term cold hardiness of Campbell Early grapevine and the IPCC projected climate winter season minimum temperature at a landscape scale. Gridded data sets of daily maximum and minimum temperature with a 270m cell spacing ("High Definition Digital Temperature Map", HD-DTM) were prepared for the current climatological normal year (1971-2000) based on observations at the 56 Korea Meteorological Administration (KMA) stations using a geospatial interpolation scheme for correcting land surface effects (e.g., land use, topography, and elevation). The same procedure was applied to the official temperature projection dataset covering South Korea (under the auspices of the IPCC-SRES A2 and A1B scenarios) for 2071-2100. The dormancy depth model was run with the gridded datasets to estimate the geographical pattern of any changes in the short-term cold hardiness of Campbell Early across South Korea for the current and future normal years (1971-2000 and 2071-2100). We combined this result with the projected mean annual minimum temperature for each period to obtain the potential risk of cold injury. Results showed that both the land areas with the normal cold-hardiness (-150 and below for dormancy depth) and those with the sub-threshold temperature for freezing damage ($-15^{\circ}C$ and below) will decrease in 2071-2100, reducing the freezing risk. Although more land area will encounter less risk in the future, the land area with higher risk (>70%) will expand from 14% at the current normal year to 23 (A1B) ${\sim}5%$ (A2) in the future. Our method can be applied to other deciduous fruit trees for delineating geographical shift of cold-hardiness zone under the projected climate change in the future, thereby providing valuable information for adaptation strategy in fruit industry.