• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.1-15
• /
• 2002

In the present paper, the marine reflection seismic survey, the survey using Chirp sonar, the detail topographic survey by narrow multi-beam sounding machine, the sea bottom geological condition survey by side-scan sonar, the sea bottom sampling by core sampler and the positioning by DGPS as the geophysical survey in shallow and transitional region are introduced by placing emphasis on hardware configuration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.349-356
• /
• 2017

In this study, we propose a method to investigate topographic characteristics by applying machine learning which is an artificial intelligence analysis method based on the spatial data constructed using UAV and the training data created through spatial analysis. This method provides an alternative to the subjective judgment and accuracy of spatial data, which is a problem of existing topographic characteristics survey for officially assessed land price. The analysis method of this study is expected to improve the problems of topographic characteristics survey method of existing field researchers and contribute to more accurate decision of officially assessed land price by providing more objective land survey method.

• Korean Journal of Geomatics
• /
• v.2 no.2
• /
• pp.91-98
• /
• 2002

Lands along the coast may be submerged in high water because of erosion by sea water, collapsing by itself, excavation by animals, and by tidal movement. From a cadastral point of view, some mistakes in registering a parcel located along the coast may cause the parcel to seem to be collapsed. Therefore, geological, physical oceanographic, and cadastral and topographic investigation are necessary to verify that the submerged land in high water collapsed after it was registered. This paper presents a cadastral and topographic investigation for proving a parcel has collapsed under the sea after registered. In this study, cadastral records and the boundary on cadastral maps were examined carefully to find any errors in them. If the topographic maps were drawn when the parcel was registered, it is good proof of topography of the land at that time. Topographic maps drawn recently were compared to those in the 1900s and in 1970s. In conclusion, cadastral records and maps as well as topographic maps play an important role in proving whether lands along the coast were collapsed or not.

• 한국지형공간정보학회:학술대회논문집
• /
• 2005.08a
• /
• pp.73-83
• /
• 2005

This study aims to establish the quality checking factors for the construction process of digital topographic map. Total 17 regulations related to quality of digital topographic map and major aerial survey firms are analyzed in terms of working process, equipments, and accuracy of results. It is standardized the process of making new digital maps using aerial photography, revising existing digital maps, and digitizing paper map. Quality checking factors for the construction process of digital topographic map are also established.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.69-78
• /
• 2013

Recently, as GIS industry has substantially grown up, convergence between industries such as the application coverage of surveying and cadastral information is gradually on the increase. The new approach of convergence between topographic surveying and cadastral survey is indispensable to make the change of geospatial environment ready and to maximize the utilization of National Spatial Data Infrastructure(NSDI). The purpose of this paper is to seek the way of synergistic improvement in topographic surveying and cadastral survey in comprehensive aspects of national geospatial information. First, we reviewed policy environment to clearly establish aim of convergence and promising perspective of GIS industry policy, considering NSDI. In addition, we examined current state of administration (organization, human resource, service) and institution situation. We came up with interior ability and external policy environment as well as critical success factor for the synergistic convergence by using SWOT analysis. Lastly, we developed basic perspective of convergence and improvement model and concrete scheme for stakeholder to complementary make progress. We can come to conclusion that the convergence of topographic surveying and cadastral survey should be not only carried in macro outline of successful NSDI but also committed to completion and maintenance of GIS framework.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.153-167
• /
• 2018

Despite many criticisms that topographic survey data for the official land price appraising collected annually using field survey method might be inaccurate, there is only few concrete research on it. This paper investigated whether the topographic survey data collected by a local government using field survey method is consistent with the data analyzed using the digital elevation model to examine its accuracy. The accuracy analysis indicated that 324 out of 1537 lots of land have inconsistent results which means the ratio of inconsistency is 17.36%. Among 11 areas studied, five had the inconsistency ratio above 20% while the worst one had 38.71%. The inconsistency ratio is generally higher for the rough terrain with irregular slope and high altitude while it is relatively lower for the terrain with smooth landform. The analysis results imply that there are limitations in investigating the topology by field survey method. Therefore, the official land price appraising policy should set precise criterion and change over to highly accurate geographic information analysis method to effectively and accurately examine topology, given the fact that the topology of the Republic of Korea has complicated features with irregular slope and altitude.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.77-85
• /
• 2007

According to the survey data during the Japanese Occupation Period, the length of South Korea's coastline is about 11,542 km, including the coastlines of land and islands. It will be very expensive and time-consuming to revise/renew accurately this coastline data through site survey, it will cost great money and time. Also, various development projects such as reclamation works on public waters, constructions of ports/harbors, etc. are frequently changing the coastal areas and coastlines, causing many renewal projects on coastal maps. For such reason, appropriate alternatives for site survey are necessary. This paper demonstrate the utilization of RTK-GPS survey data, qualitative analysis and 3D topographic analysis for extracting the change in five coastal areas (Songjeong, Haeundae, Kwanganri, Songdo and Dadaepo). The local experimental areas subjected for this research were limited to five coastal areas near Busan.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.169-177
• /
• 1997

The purpose of this paper is to study the ideal Auto-surveying system and to establish the standard of work procedure involved with completing a precise three-dimensional topographic survey with RTK GPS equipment, a pen based personal computer, and real time CADD software. The fieldwork was done at a golf course which could be regarded as a heavy civil project site such as the reclamation and the site preparation work in December of 1997. The proposed Auto-surveying system and the work procedure in this paper is based on the data processing and the resultant topographic map of the golf course.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.3
• /
• pp.143-148
• /
• 2010

Changes in coastline length and land area as well as coastline attribute distribution in Anmyondo were quantified by comparing topographic map produced in 1910's with coastline survey database compiled in 2003. Numerous reclamation has simplified complicated coastline, which resulted in reducing coastline length by 58% but increasing land area by 36%. In 2003, gravel coastline was mostly dominated. Coastline of tidal barrier also reached up to 33% of overall coastline. Gravel coastline occurred dominantly at the eastern side of Anmyondo, whereas sand coastline at the western side. An application of coastline attribute to coastal erosion zone required accurate coastline data, but it was conceived that the topographic map produced in 1910's was not useful for this purpose.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.47-52
• /
• 2011

Recently damage scale by local winds and typhoon has dramatically increased. Korea has the terrain over 70% of the land and the planning of the wind load is necessary to estimate reflecting appropriately the change of the wind-speed according to the characteristic of the terrain and in the Korean Building Code(2009), this is stated and it reflects to the design process. However, in order to estimate the topographic factor of the wind speed considering the topographic characteristics in the structure design actually, it has many difficult points including the local topographic survey, etc. In this paper, the Digital Elevation Model(DEM) is created using TIN interpolation method in the form of the digital map and then the interface was designed and implemented which can automatically estimate the topographic factor of wind speed by using ESRI(R)ArcObjectTM and the Visual Basic programing language. By applying it to the terrain which positioned in the downtown area, the practicality of the topographic factor of wind speed estimation interface was checked.