• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.586-586
• /
• 2003

In the infected immature tooth with periapical involvement, the pulp is considered to hardly exist in the canal and periapical area. Such a tooth receives apexification procedure, because revascularization of the pulp chamber is in principle not expected. Apexification is beneficial to induce further development of an apex to close the foramina, but does not promote the thickness of the entire canal wall dentin. It may be possible for the pulp to be only partially necrotic and infected when an extremely large communication from the pulp space to the periapical tissues exists with a very young tooth. If this were the case, vital pulp in the apical part of the canal could proliferate new pulp into the coronal pulp space by the successful removal and disinfection of the necrotic infected coronal pulp.(omitted)

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.412-420
• /
• 2000

A treatment should be functional, esthetic, conservative and periodontally healthy in order to meet criteria of an ideal dental procedure. In a prsthodontic patient with horizontal and/or vertical space deficiency, orthodontic tooth movement should be considered as a pre-prosthetic procedure. With a conventional technique, orthodontic treatment is a time-consuming and uncomfortable procedure. Pre-prosthetic orthodontic treatment, however, is no longer difficult procedure with the help of recently developed techniques, such as passive bracketing. The present article outlines the problems and causes of horizontal and vertical space deficiency in prosthodontic patients, and presents efficient pre-prosthetic orthodontic treatment modalities with typical clinical cases.

• 대한치과교정학회지
• /
• 제4권1호
• /
• pp.57-61
• /
• 1974

The patient, a girl of 19 years in good health, had a class I malocclusion. The maxillary left centra1 incisors and both lateral incisors had already erupted. But the space for the right central incisor was partially closed by the mesial drifting of the neighboring teeth. The caused a shift in the midline and a cross-bite relation on the incisors. X-ray examination revealed the presence of the right central incisor in the alveolar bone and odontoma just above the crown of the right central incisor. After enough space for the impacted incisor was created in the dental arch with a open-coil spring the rectangular incision was made. Removing the odontoma uncovered the flat surface of the labial aspect of the incisor. During the tooth had erupted of its own accord, any unnecessary force had been imposed on the tooth. When it was decided that the tooth should be brought out by the mechanical device, the gold cast onlay with hook was used and run a light elastic between this hook and the main arch wire. Finally the tooth was brought down to the arch level. The result was excellent. Fortunately the esthetic problem and any detrimental effects on the psychological make-up could be avoided.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.321-328
• /
• 2003

The elongation of contact length on the line of action is considered with particular reference for roll forming of gears, and for dynamic behavior of the tooth in meshing. However there is no paper that discuss the elongation of contact length in the load meshing of gears. Based on our investigation, the contact length on the line of action elongates more than the kinematically calculated value. In rolling, as the tool approaches the workpiece, the center distance of the gears decreases by a small amount. But, the elongation of contact length is sensitive. Therefore, the contact point on the line of action is difficult to be determined, which complicates the tooth analysis. In this study, the exact relation between the elongation of contact length and the tooth space over the recess or before the approach are revealed by experiments and kinematic theory. This analytical result applies not only for rolling, but also for the single flank meshing which is done under constant center distance.

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.241-250
• /
• 2016

Oligodontia is defined as a congenital tooth agenesis with the absence of six or more permanent teeth. This clinical report describes a patient with non-syndromic partial oligodontia, with retained deciduous teeth and the absence of 16 permanent teeth. Anterior esthetic problems were caused by interarch tooth size discrepancy, interdental space, aberrant tooth dimensions, and the absence of centric contacts of the anterior teeth. Prosthetic restoration after orthodontic and implant treatment was performed with a multi-disciplinary team approach. Favorable functional and esthetic results were obtained using a definitive prosthesis.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.46-56
• /
• 1995

As demands on the precision bevel gears are increased in the related industry, the exact kinematical investigations of a pair of spherical involute bevel gears are required for the computer aided design. The exact angular velocity ratio based on the characteristics of the spherical involute tooth is derived and verified from the relationship between rotational angles. Elementary kinematics of the gearsets is investigated by applying the transformation of the coordinate systems. The tooth contact lines based on logarithmic tooth-wise curve are examines in three dimentional space. Contact ratio is formulated and simulated according to the system parameters such as shaft angles, pressure angle, and spiral angles. The condition of teeth interference is dervied and the critical numbers of gear teeth are calculated. The whole surface geometry of a spiral bevel gearsets are discretized and visualized by a computer graphic tool.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.22-27
• /
• 2008

Purpose : This study sought to evaluate the dimensional stability of the SITT (Silicone Index Tooth Tray) impression system and to determine whether providing space for wash impression material in SITT is a necessary step in obtaining accurate prostheses. Materials and methods : After mounting metal dies with shoulder and chamfer margins arbitrarily, SITT was fabricated using Blu-mousse$^{(R)}$. To test the dimensional stability of the SITT system for margin design, the shoulder margin and chamfer margin were evaluated. Furthermore, to test the effect of space for wash impression material, 0.5mm space in SITT and zero space in SITT were statistically compared. Results : 1. There was no significant difference between the group with shoulder margin and that with chamfer margin. 2. There was no significant difference between the group with 0.5mm space and that with zero space for wash impression material. Conclusions : Considering the limitations of this study, the dimensional stability of the SITT system did not interfere with the margin design. Space for the wash impression material was also unnecessary.

• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.51-55
• /
• 2011

과잉치는 영구치열 및 유치열에서 발생하는 치아 발육 장애이다. 원인은 명확하게 밝혀지지 않았으나 치판의 과도한 활성으로 인해 발생한다는 이론과 환경적 요인으로 인해 치배가 두 개로 나눠진다는 이론 등이 제시되었다. 과잉치의 발생은 유치열보다는 영구치열에 호발하며 전상악부에 높은 빈도로 발생한다. 과잉치가 발생한 위치나 형태에 따라 분류할 수 있으며 정상적인 형태를 나타날 때 보충치(supplemental tooth)라고 명명하기도 한다. 과잉치 발생시 치아의 맹출 장애, 총생, 정중이개, 인접치의 회전이나 흡수, 낭종 등의 합병증을 야기할 수 있으므로 조기 발견 및 진단이 중요하다. 과잉치의 처치는 형태나 위치, 치열에 미치는 영향 그리고 환아의 심리적 상태 등을 고려하여야 한다. 본 증례에서는 방사선학적 검사와 임상 검사를 통해 상악의 과잉 유구치를 진단하였다. 하지만 어떤 치아가 과잉치인지 진단하기가 어려웠다. 적절한 공간 형성과 과도한 공간 소실을 방지하기 위하여 악궁의 근심에 위치한 치아를 발거하여 양호한 결과를 얻었다.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.220-225
• /
• 2014

A fiber-reinforced composite (FRC) fixed prosthesis is an innovative alternative to a traditional metal restoration, as it is a conservative treatment method. This case report demonstrates a detailed procedure for restoring a missing anterior tooth with an FRC. A 44-year-old woman visited our department with an avulsed tooth that had fallen out on the previous day and was completely dry. This tooth was replanted, but it failed after one year. A semi-direct technique was used to fabricate a FRC fixed partial prosthesis for its replacement. The FRC framework and the pontic were fabricated using a duplicated cast model and nanofilled composite resin. Later on, interproximal contact, tooth shape, and shade were adjusted at chairside. This technique not only enables the clinician to replace a missing tooth immediately after extraction for minimizing esthetic problems, but it also decreases both tooth reduction and cost.

• 대한소아치과학회지
• /
• 제36권3호
• /
• pp.475-480
• /
• 2009

저위교합이란 치아가 출은한 이후 유착 등의 원인으로 맹출이 정지되어 주위 인접치 보다 교합평면이 낮아지는 것을 말한다. 저위교합은 인접치들의 경사, 저위교합된 부위의 공간상실, 대합치의 정출, 해당부위 치아우식 감수성의 증가, 후속 영구치의 맹출경로 변위, 매복, 회전 등의 문제점을 유발할 수 있으므로 조기 진단 및 정기검진을 통한 적절한 치료가 필요하다. 저위교합된 유구치는 대부분 영구 계승치가 존재하며 일반적으로 정상 탈락한다. 그러나 저위교합된 유구치의 탈락이 지연되고 저위교합의 정도가 심화되어 해당부위의 공간상실이 발생하면, 공간부족으로 인하여 후속 영구치의 매복을 야기할 수 있다. 이러한 경우 교정적으로 공간확장술을 시행한 후 외과적 발치를 고려해야 한다. 본 증례는 하악 제 2유구치의 저위교합이 관찰된 3명의 환아를 대상으로 공간에 대한 평가 후 필요한 경우 공간확장술을 시행하고 발치를 시행함으로써 저위교합으로 인해 발생된 문제점을 개선하고, 추후에 발생될 합병증을 예방하였기에 이를 보고하는 바이다.