• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1989년도 제10회 학술강연회초록집
• /
• pp.78-85
• /
• 1989

Conventional theory of gear mechanism can not be applied to analyze the harmonic drive due to specific movement of the tooth. Therefore, external tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$C. This paper deals with an analysis of kinematics and strength analysis of tooth. Then a theoretical new tooth profile of the flexspline and method of manufacture of external tooth profile are presented.

• Journal of Korean Dental Science
• /
• 제7권2호
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.311-327
• /
• 1988

Vascular changes in the periodontal ligament of the rat incisors following application of experimental orthodontic forces were examined by the India ink perfusion method. 57 rats were used for this experiment. The rats were divided into experimental group (54 rats) and control group (3 rats). 54 experimental rats were divided into group I (27 rats) and group II (27 rats). The right and left upper incisors of group. I and group II rats were separated distally with forces of 20gm, 70gm respectively. The vascular changes of periodontal ligament were observed histologically by means of light microscope after 1, 2 and 3 days of tooth movement and 1,3,5,8,14, and 21 days after removal of orthodontic force. The results were as follows; 1. After one day of tooth movement, occlusion of blood vessels, hyalinization of periodontal ligament and resorption of alveolar bone adjacent to the alveolar crest on pressure side were observed. Above the tissue changes on the pressure side of group II were more severe than those of group I. Especially, septal bone of group II was separated after 2 days of tooth movement. 2. In tension zones, periodontal space was widened and periodontal fibers were orientated in the direction of puil. The blood vessels of periodontal ligament were distended. New bone deposition was seen along the inner surface of the alveolus after 2 days of tooth movement. 3. After 3 days of tooth movement, deposition of new bone was seen along the periosteal surface of alveolar bone on pressure side, progressing with increasing after removal of orthodontic force. Remodelling of the new bone was occurred 5 days after removal of orthodontic force. 4. 3 days after removal of orthodontic force, invasion of blood vessels into the marginal periodontal ligament on pressure side was observed clearly and the vessels below the epithelial attachment were increased. 5. After removal of orthodontic force, hyalinized structures disappeared concomittantly with an invasion of blood vessels from the neighboring periodontal ligament. 14 days after removal of orthodontic force, the vessels in the periodontal ligament of group I were finished the vascular rearrangement. 21 days after removal of orthodontic force, the vessels in the periodontal ligament of group II were finished the vascular rearrangement.

• 대한치과교정학회지
• /
• 제35권3호
• /
• pp.196-206
• /
• 2005

이 연구는 비타민 C 결핍이 guinea pig에서의 실험적 치아이동속도와 치조골 개조에 미치는 영향을 알아보고자 시행되었다 이를 위하여 웅성 guinea pig 30마리를 대상으로 정상량의 비타민 C (5 mg/day) 를 투여한 군(정상군)과 결핍량(0.2mg/day)을 투여한 군(결핍군)으로 나누고 치아이동 실험을 시행하였다. 초기 교정력 75gm으로 상악의 좌우 중절치를 이개시키는 치아이동을 시행하고, 순차적으로 실험 경과기간이 지나면 치아이동양을 계측하고 희생시켜 조직 소견을 관찰하였다. 실험 결과. 결핍군에서 치조골과 치주인대의 교원섬유 함량은 현저한 감소와 불규칙한 배열을 보였으며 인대세포의 수적 감소 및 출혈이 관찰되었고 치조골에서 골형성의 감소와 파골세포의 출현 및 골소강의 크기증가와 골소강내의 다수의 파골세포가 관찰되었다. 정상군의 인장측 치조골은 치아이동 시간경과에 따라 조골세포와 골형성이 지속적인 증가를 보였으나, 결핍군에서는 조골세포가 감소하고 골형성은 미약한 양상을 보였다. 치아 이동양은 실험 초기 1일, 3일, 5일, 7일 결핍군의 치아이동양이 정상군보다 많게 나타났다 (p<0.05) 이상의 결과에서 비타민 C 결핍은 치주조직의 교원질의 합성을 억제하여 치조골의 형성을 감소시키고 흡수를 증가시키는 골개조를 초래하며, 치아이동중 인장측 치조골 형성을 억제하고 압박측 치조골 흡수를 촉진하여 치아이동 초기에는 빠른 치아이동을 가져오는 것을 시사한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권6호
• /
• pp.684-689
• /
• 2007

The aim of this study is to examine the change of the osteoclastic activity in the surrounding bone with or without tooth movement after corticotomy by histologic study. Eighteen male Sprague Dawley rats with an average body weight of 300 g(range 250-350 g) were used. The rats were divided into three groups of six animals. They were operated corticotomy-assisted tooth movement and killed after 1 week, 2 weeks, and 3 weeks after tooth movement. Corticotomy was done in the surrounding of the both upper first molar. A split mouth design was used by referring to the contralateral side as control. After flap suturing, the upper left first molar was moved anteriorly by closed coil spring. The force applied was 1 N. The average of tooth movement of the 1 week group was $0.24{\pm}0.09mm,\;0.20{\pm}0.26mm$ in 2 weeks group and $0.41{\pm}0.39mm$ in 3 weeks group, respectively. The difference between the 1 week and the 2 weeks groups was very small to compare with the 3 weeks group. In the treatment group, the average numbers of cells that positively reacted to TRAP were 14.5 in the 1 week group, 12.0 in the 2 weeks group, and 6.0 in the 3 weeks group. In the control group, the numbers were 8.3 in the 1 week group, 12.8 in the 2 week group, and 1.5 in the 3 week group, respectively. The amount of tooth movement of the 3 week group was about twice as large as those of the 1 week and 2 week groups. From the standpoint of histology, the average number of cells that positively reacted to TRAP was initially larger in the treatment group than in the control group, similar in both group in 2 weeks, and became less in the treatment group in 3 weeks. Additionally, in the control group, their activity of osteoclast was higher in 2 weeks than in 1 week, and decreased rapidly in 3 weeks.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.379-389
• /
• 1998

올바른 교정치료계획이나 보정계획 수립을 위해서는 교정력 제거후 치주조직 재형성 양상 및 시기의 규명이 필요하다. 동적교정치료가 종료된 환자 6명을 대상으로 교정장치 제거일과 제거일로부터 1주, 2주, 3주, 4주, 6주, 8주, 10주, 12주, 16주, 20주, 24주에 상악의 경우 중절치부터 제1대구치까지, 하악의 경우 중절치부터 견치까지 좌우 치아의 동요도를 Periotest를 사용하여 측정하고 비교분석한 결과 다음과 같은 결론을 얻었다. 1. 교정장치 제거시 치아동요도는 개인에 따라 매우 다양하게 나타났으며 견치, 소구치, 대구치보다 절치에서 크게 나타났다. 2. 교정장치 제거 후 동요도는 시간 경과에 따라 감소하였는데 그 감소양상은 24주까지 지속되었다. 3. 상악절치는 장치제거 후 24주간 내내 지속적 감소양상을 보인 반면 나머지 치아는 처음 12주간은 급격한, 나중 12주간에서는 완만한 감소양상을 나타내었다. 4. 교정장치 제거 후 동요도 감소양상은 상악 제2소구치에서 가장 일관성있게 나타났다. 5. 연구기간 중 전치부 교합접촉 과다 정도에 따른 좌우 치아간 동요도는 통계학적 유의차를 보이지 않았다. 이상의 연구 결과는 치아이동 후 치주조직 재형성이 장치제거 6개월 후에도 완성되지 않음을 시사하였다.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.250-259
• /
• 2001

Since the late 1930s, acrylic resins have been the materials of choice for the fabrication of complete denture bases. It has excellent esthetic properties, adequate strength, low water sorption, and low solubility. But acrylic resin has disadvantage of processing shrinkage that reduces denture retention and accuracy of denture occlusion. Metals also have been used in denture base material. Metals used in denture bases display excellent strength and dimensional stability. The major disadvantages associated with metal denture bases include increased cost, difficulty in fabrication, compromised esthetic qualities, and inability to re-base. The purpose of this study is to compare the artificial tooth movements of complete dentures with resin bases and metal bases after curing, deflasking, polishing immersion in water for 1 week and 4 weeks. Twenty-four maxillary complete resin denture bases with artificial teeth were fabricated. Twelve of them were resin based and other twelve of them were metal based. Fine crosses were marked on the incisal edges of right central incisors and distobuccal cusps of be second molars. Measurements were done for the changes of distances of reference points at the time of wax denture, after deflasking after decasting after polishing after immersion in water for 1 week and 4 weeks Meaurements were done to the accuracy of 0.001mm with a measuring microscope. The results were as follows : 1. Metal base showed significantly less tooth movement than resin base after curing and decasting (p<0.01). 2. Metal base showed significantly less tooth movement than resin base after polishing (p<0.01). 3. After immersion in water for 1 week and 4 weeks, metal base showed less movement than resin base. Difference was significant for anterior-posterior distances (p<0.01), but not significant for molar-to-molar distance (p>0.01). 4. 1 week and 4 weeks of immersion failed to compensate the initial processing shrinkage of metal and resin bases (p>0.01).

• Journal of Periodontal and Implant Science
• /
• 제53권1호
• /
• pp.2-19
• /
• 2023

Purpose: Surgical techniques in orthodontics have received widespread attention in recent years. Meanwhile, biomaterials with high molecular content have been introduced, such as platelet concentrates (PCs), which may accelerate orthodontic tooth movement (OTM) and reduce periodontal damage. The present systematic review aimed to answer the following PICO question: "In patients in whom orthodontic surgical techniques are performed (P), what is the effectiveness of using PCs over the surgical site (I) when compared to not placing PCs (C) to achieve faster tooth movement (O)?" Methods: A search was performed in 6 databases. The criteria employed were those described in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses declaration. The present review included studies with a control group that provided information about the influence of PCs on the rate of OTM. Results: The electronic search identified 10 studies that met the established criteria. Conclusions: The included studies were very diverse, making it difficult to draw convincing conclusions. However, a tendency was observed for OTM to be accelerated when PCs were used as an adjuvant for canine distalization after premolar extraction when distalization was started in the same session. Likewise, studies seem to indicate an association between PC injection and the amount of canine retraction. However, it is not possible to affirm that the use of PCs in corticotomy shortens the overall treatment time, as this question has not been studied adequately.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권2호
• /
• pp.96-100
• /
• 2012

Objectives: This study sought to evaluate trabecular changes in the mandible using fractal analysis and to explain the transient osteopenia related to rapid orthodontic tooth movement after orthognathic surgery. Materials and Methods: Panoramic radiographs were taken of 26 patients who underwent bilateral sagittal split ramus osteotomy. Radiographs taken before the surgery and 1 month after surgery were overlapped, and $40{\times}40$ pixel square regions of interest were selected near the mandibular canines and 1st molars. After the image processing procedure, the fractal dimension was calculated using the box-counting method. Results: Fractal dimension after orthognathic surgery decreased in a statistically significant manner (P<0.05). The change in fractal dimension on the canine side had greater statistical significance as compared to that seen on the 1st molar side. Conclusion: This study found that bone density decreases after orthognathic surgery due to transient osteopenia related to the regional acceleratory phenomenon. This result can provide a guide to evaluating orthodontic tooth movement after orthognathic surgery.

• 대한치과교정학회지
• /
• 제45권6호
• /
• pp.275-281
• /
• 2015

Objective: To assess the accuracy of anterior tooth movement using clear aligners in integrated three-dimensional digital models. Methods: Cone-beam computed tomography was performed before and after treatment with clear aligners in 32 patients. Plaster casts were laser-scanned for virtual setup and aligner fabrication. Differences in predicted and achieved root and crown positions of anterior teeth were compared on superimposed maxillofacial digital images and virtual models and analyzed by Student's t-test. Results: The mean discrepancies in maxillary and mandibular crown positions were $0.376{\pm}0.041mm$ and $0.398{\pm}0.037mm$, respectively. Maxillary and mandibular root positions differed by $2.062{\pm}0.128mm$ and $1.941{\pm}0.154mm$, respectively. Conclusions: Crowns but not roots of anterior teeth can be moved to designated positions using clear aligners, because these appliances cause tooth movement by tilting motion.