• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• 대한치과교정학회지
• /
• 제51권5호
• /
• pp.329-336
• /
• 2021

Objective: To compare the magnitude of external apical root resorption (EARR) 6 months after starting orthodontic treatment using orthodontic aligners (OAs) and fixed appliances (FAs). Methods: This parallel randomized clinical trial included 40 patients randomized into two groups: OA group (n = 20, 160 incisors) and FA group (n = 20, 160 incisors). For evaluation of the tooth length, periapical radiographs and standardized linear measurements of the maxillary and mandibular incisors were acquired before (T0) and 6 months after treatment initiation (T1). EARR was calculated through the difference in length between the two time points (T1-T0). Statistical comparisons were performed by means of using t-tests, chi-squared test and covariance analysis (a = 5%). Results: Rounding of the root apex was observed in both groups; the resorption involved 2.88% of the root length, so 97.12% of the tooth length remained intact. Intragroup comparisons between the two time points revealed a significant difference, with (T1-T0) ranging from -0.52 to -0.88 mm in the FA group and from -0.52 to -0.85 mm in the OA group. In the intergroup comparisons, only tooth #21 presented a statistically significant difference (OA: -0.52 ± 0.57 mm, FA: -0.86 ± 0.60 mm); however, the overall differences between groups were not clinically relevant, ranging from 0.03 to 0.35 mm. Conclusions: OA and FA treatment resulted in a similar degree of EARR in the maxillary and mandibular incisors at 6 months after treatment initiation. However, the amount of resorption was small and does not impair tooth longevity.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.271-300
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstrcture. This investigation evaluated the stress patterns in a photoelastic model produced by three different types of dental implants such as Branemark, Steri-Oss, IMZ and resin tooth using the techniques of quasi three dimensional photoelasticity. The teeth-supported bridge had a first molar pontic supported by second premolar and second molar as a control group. The implant and toothsupported bridge had a first molar pontic supported by second premolar and implant posterior retainer as an experimental group. Prostheses were mechanically connected to an adjacent second premolar by the rigid of nonrigid connection, Nonrigid connection used an attachment placed between the tooth-supported and fixture-supported component. The female(keyway) of attachment was placed on the distal end of the retainer supported by the tooth ; the male(Key) of attachment connected to the osseointegrated bridge was engaged into the keyway. All prostheses were casted in the same nonprecious alloy and were cemented and screwed on their respective abutments and implants. 16㎏ of vertical loads on central fossae of second premolar, first molar pontic, implant of second molar were applied respectively and 6.5㎏ of inclined load on middle buccal surface of first molar pontic was applied. The results were as follows : 1. Under the vertical load on the central fossa of first mloar pontic, the stress developed at the apex of tooth of implat was more uniformly distributed in the case of nonrigid connection than in the case of rigid connection. 2. Under the vertical load on the central fossa of first molar pontic, the stress developed around the cervical area of tooth of implant was larger in the case of rigid connection than in the case of nonrigid connection because the bending moment was more occured in the case of rigid connection than in the case of nonrigid connection. 3. Stress was more restricted to the loaded side of nonrigid connection than to that of rigid connection 4. Under the inclined load. The set screw loosening of implant was more easily occured in the case of nonrigid connection than in the case of rigid connection due to torque moment. 5. In the case of Branemark implant, the stress concentration in second premolar was larger and the stress developed around the cervical area of implant was lower than any other cases under the vertical load, because Branemark implant with the flexible gold screw was showed in incline toward second premolar by a bending moment. 6. The stress developed around the apex of tooth or implant was more uniformly distributed in the case of Steri-Oss implant with stiff screw than in the case of Branemark implant under the vertical load. But, the stress developed around the cervical area of the Steri-Oss implant was larger than that of any other implants because bending moment was occured by vertical migration of second premolar. 7. The stress distribution in the case of IMZ implant was similar to the case of natural teeth under small vertical load. But, the residual stress around the implant was showed to occurdue to deformation of IMC and sinking of screw under larger vertical load.

• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.317-322
• /
• 1999

치내치는 석회화가 되기전에 치관의 함입에 의해서 야기되어지는 치아의 형태이상이다. 영구치뿐만 아니라 유치에서 발생될 수 있지만 주로 상악 측절치에서 발생하며 그 발생빈도는 0.04-10%로 다양하게 보고되고 있다. 치내치는 치수와 치근단 조직으로 교통될 수 있어 이로 인해서 치수의 염증, 치근단 농양, 낭종 등을 야기하거나 내흡수를 일으킬 수도 있으며 치관의 형태이상을 보이는 등 심미적인 문제도 초래할 수 있다. 치내치는 그 함입의 정도에 따라서 Oehlers씨에 의해서 3가지 형태로 구분된다. 치내치의 다양한 형태중 Type 3의 치내치는 치내치 함입부가 치수와의 교통없이 치근단공이나 측방 치주조직으로 opening을 형성하는 형태로 치수감염의 여부에 따라 치료전략이 달라지며, 치수감염에 의한 병소가 존재하는 경우에는 함입된 형태와 복잡성을 고려하여 통상적인 근관치료, 외과적 치근단 절제술, 의도적 재식술 및 발치를 시행할 수 있다. 본 증례에서는 근첨이 개방된 측방 치주공을 가진 치내치로 해당치아가 생활력을 보이고 invagination의 형태가 단순하였기에 invagination에 한정된 근관치료와 근첨형성술을 통하여 성공적인 결과를 보였으며 다음과 같은 결과를 얻었다. 1. Type 3 치내치의 경우에서 치아의 생활력이 유지되고 invagination의 형태가 복잡하지 않다면, 그리고 치수와 invagination과의 교통의 증거가 없다면 invagination에 한정된 근관치료로서 병소의 해결과 해당치아의 생활력 유지가 가능했다. 2. 개방된 근첨을 가진 invagination을 보이는 치내치의 경우 근첨형성술로 개방된 근첨의 폐쇄를 유도할 수 있었고 이런 점을 이용 외과적 술식을 피할 수 있었다.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.305-311
• /
• 2014

목적: 다양한 원인으로 발생된 Abfraction 병소가 있는 치아를 금속도재관으로 수복 할 경우, 변연의 위치에 따라 예후가 다양해질 수 있다. 수복물의 장기적 성공을 검증하기 위해서는 응력분포의 분석이 필요하지만 금속도재관이 abfraction 병소의 적응증인 경우 금속도재관이 응력 분포에 미치는 영향을 밝히는 연구는 아직 없다. 본 연구의 목적은 abfraction 병소가 있는 치아를 수복하는 금속도재관이 바람직한 응력 분포를 나타낼 수 있는 조건을 알아 보고자 함이다. 재료 및 방법: 치아, 주위 조직과 금속 도재관의 외형을 반영한 2차원 유한 요소모델을 제작하고 144 N의 편심 교합력 하에서의 응력분포를 유한요소 분석법으로 분석하였다. 금속 도재관의 변연 위치를 쐐기모양의 결손부의 하연에(Group 0), 그리고 결손부의 하연보다 1 mm 하방(Group 1)과 2mm 하방(Group2)에 위치시켰다. 결과: Group 0에서 von Mises stress는 금속 도재관의 변연과 결손부의 첨부에 집중 되었고 협측 변연의 응력은 설측 부위로 분포되었다. Group 1과 Group 2에서의 응력분포양상은 비슷하게 나타났다. 응력은 결손부의 첨부에 집중되지만 협측과 설측의 응력띠는 서로 분리된 양상으로 나타났다. 결론: 금속도재관의 변연을 Abfraction 병소의 하연에 설정할 경우, 금속도재관은 Abfraction 병소의 첨부에 응력을 집중시킨다.

• 치과방사선
• /
• 제21권2호
• /
• pp.367-375
• /
• 1991

The clinical and radiographic features of 1,171 mesiodenses were studied with periapical radiograms and/or pantomograms in 942 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1980 to December 1989. The obrained results were as follows; 1. The incidence of mesiodens was higher in males (75.4%) than in females (24.6%). 2. In number of mesiodenses per individual, a single mesiodens was found to be 75.9%, 2-mesiodenses to be 23.8%, and 3-mesiodenses to be 0.2%. 3. In mesiodenses according to erupted and impacted status, the erupted mesiodens was found to be 16.5%, the impacted mesiodens in the interdental alveolar bone to be 66.6%, and in the region below root apex to be 16.9%. 4. In impacted mesiodenses according to direction of tooth crown, the inverted impaction was found to be 68.8%, the vertical impaction to be 15.1%, and the angulated impaction to be 16.1%. Among the impacted mesiodenses, a palatally located impaction was 87.5%, a middle 4.9%, and a labially 7.6%. 5. In mesiodenses according to shape of the tooth crown, a incisor-like type was found to be 1.6%, a canine-like type to be 6.8%, a conical type to be 79.2%, and a tuberculated type to e 12.4%. 6. In effect of mesiodens on adjacent tooth, non-specific influences were found to be 73.4%, crowding to be 0.3%, diastema to be 11.8%, rotation to be 5.7%, delayed eruption to be 3.8%, root resorption to be 2.6%, and dentigerous cyst to be 2.4%.

• Imaging Science in Dentistry
• /
• 제43권3호
• /
• pp.135-143
• /
• 2013

Purpose: This study was performed to obtain a quantitative evaluation of the cortical and cancellous bone graft harvestable from the mental and canine regions, and to evaluate the cortical vestibular thickness. Materials and Methods: This study collected cone-beam computed tomographic (CBCT) images of 100 Italian patients. The limits of the mental region were established: 5 mm in front of the medial margin of each mental foramen, 5 mm under the apex of each tooth present, and above the inferior mandibular cortex. Cortical and cancellous bone volumes were evaluated using SimPlant software (SimPlant 3-D Pro, Materialize, Leuven, Belgium) tools. In addition, the cortical vestibular thickness (minimal and maximal values) was evaluated in 3 cross-sections corresponding to the right canine tooth (3R), the median section (M), and the left canine tooth (3L). Results: The cortical volume was $0.71{\pm}0.23mL$ (0.27-1.96 mL) and the cancellous volume was $2.16{\pm}0.76mL$ (0.86-6.28 mL). The minimal cortical vestibular thickness was $1.54{\pm}0.41mm$ (0.61-3.25 mm), and the maximal cortical vestibular thickness was $3.14{\pm}0.75mm$ (1.01-5.83 mm). Conclusion: The use of the imaging software allowed a patient-specific assessment of mental and canine region bone availability. The proposed evaluation method might help the surgeon in the selection of the donor site by the comparison between bone availability in the donor site and the reconstructive exigency of the recipient site.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.77-82
• /
• 2011

A long-term follow-up study of a case of impacted teeth associated with a large dentigerous cyst in the left maxilla is presented. The patient was a 30-year-old man who had a large dentigerous cyst in the premaxilla and left posterior maxilla, which impacted the canine and supernumerary tooth. This is one of the most prevalent types of odontogenic cysts associated with an erupted or developing tooth, particularly the mandibular third molars. The other teeth commonly affected in order of frequency are the maxillary canines, maxillary third molars and rarely, the central incisor. Radiographically, the cyst appears as huge ovoid well-demarcated unilocular radiolucency with a sclerotic border and causes ectopic displacement of the inferior border of the maxillary sinus without destruction. Dentigerous cysts may grow unnoticed to such extensive sizes as to occupy a considerable portion of the maxillary sinus. These cysts appear to be associated with a supernumerary tooth in the maxillary anterior incisors region called the mesiodens and impacted canine. The present case report describes the surgical enucleation of a dentigerous cyst involving the permanent maxillary left canine and mesioden. After surgery, left maxillary sinus recovered their normal size and apposition of bone was observed around the apex of the posterior teeth. During the subsequent years, there was no recurrence of the cystic lesion but the inflammation was evoked in the anterior maxilla after 42 months. This complication appeared to have correlated with bony healing in the enucleation site of the cyst. We report the healing status of a huge dentigerous cyst in the maxilla for 5 years with a review of the relevant literature.

• Journal of Oral Medicine and Pain
• /
• 제24권1호
• /
• pp.95-106
• /
• 1999

This study was performed to investigate the age distribution with tooth calcification and degree of eruption of permanent teeth. For the study, healthy 184 patients from 5 to 19 years old without any previous serious dental treatment were randomly selected, and intraoral standard films and dental casts were taken for evaluation of stage of calcification and degree of eruption, respectively. Tooth calcification of 13 stages, designed by the author based on the Nolla's classification and eruption level of 4 or 5 degree was used. Data were processed by SAS/Stat program and the obtained results were as follows; 1. The age of root completed with open apex in lower posterior teeth were 13.8 years for first premolar, 14.0 years for second premolar, 10.5 years for first molar, and 14.2 years for second molar. There were no significant difference between right and left side. 2. As for the sequence of eruption, first molar was the first teeth erupted in upper arch, while central incisor was the first teeth in lower arch. In general, eruption of lower teeth were slightly earlier than the corresponding teeth of upper arch. 3. There were no difference of age of the same stage of development between Nolla's and the author's classification. From the results, the author's classification can be used for estimation of age with more finely in age of 8 to 15 years old. 4. Multiple regression equations for age with Nolla's(Ns) and the author's(Ks) classification of tooth calcification, and degree of eruption(DE) were as follow; Age(by #34) = 7.55 + 0.76Ks34 + 0.80DE34 - 0.72Ns34 Age(by #35) = 7.10 + 0.81Ks35 + 0.6IDE35 Age(by #37) = 6.61 + 0.82Ks37 + 0.5IDE37. Age(by #44) = 7.02 + 0.62Ks44 + 0.82DE44 Age(by #45) = 8.04 + 0.93Ks45 + 0.64DE45 - 0.89Ns45 Age(by #47) = 6.40 + 0.86Ks47 + 0.56DE47.

• 대한장애인치과학회지
• /
• 제12권2호
• /
• pp.72-76
• /
• 2016

저자는 뇌병변 장애와 보행장애로 반복적인 외상성 치아손상을 받은 환아의 치료를 시행하였다. 최근 실활된 미성숙 영구치의 계속된 치근 형성을 위해 재생적 근관치료 술식이 많이 시도되어 성공적인 결과를 보이고 있다. 하지만 장애로 인해 반복적인 외상의 위험을 가진 환아에서 치수조직의 재생 보다는 치근단형성술을 통한 치근단의 폐쇄와 근관 충전이 비용과 장기적인 예후의 측면에서 유리한 치료방법이 될 수 있음을 확인하였다.