• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.43-49
• /
• 2001

A reduced machining time and increased accuracy for the sculptured surface are very important when producing complicated parts. The step-size and tool-path interval are essential components in high speed and high resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will be caused. In particular, the machining time, which is key in high speed machining, is affected by the tool-path interval more than the step-size. The conventional method for calculating the tool=path interval is to select a small parametric increment of a small increment based on the curvature of the surface. However, this approach also has limitations. The first is that the tool-path interval can not be calculated precisely. The second is that a separate tool-path interval needs to be calculated in each of the three cases. The third is that the conversion from Cartesian domain to parametric domain or vice versa must be necessary. Accordingly, the current study proposes a new tool-path interval algorithm that do not involve a curvature and that is not necessary for any conversion and a variable step-size algorithm for NURBS.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1183-1192
• /
• 1993

본 연구에서는 다음과 같은 두가지 관점에서 공구경로 최적화를 위한 기존 방 법의 문제점을 검토하고 이의 개선 방안을 제시하였다. 첫째, 기존의 공구경로 산출 방법에서는 고려되지 않는 공구대의 공구 장착 현황(turret configuration)이 최적화 과정에서 고려되어야 한다. 둘째로, 제작과 관련한 구속조건(manufacturing con- straints)이 최적화 과정에 직접 반영되어야 한다.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.133-139
• /
• 2004

High speed machining (HSM) can reduce machining time with the high metal removal rate by high speed spindle and feedrate. This paper supports HSM technology using the small size tool with the optimal tool path generation and modification of tool change. The optimum tool path is generated to reduce cutting length of cavity pattern and change the cutting tool for preventing the tool breakage by wear. The tool path is modified with the experiment data of tool wear and breakage to support tool change on reasonable time. The result can contribute to HSM technology of high hardness materials using the small size end-mill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.208-208
• /
• 2004

공작기계와 절삭 공구의 발달로 고속 가공(high speed machining)의 도입이 가속화되고 있다. 고속 가공은 소재 제거율(MRR; material removal rate)을 향상시킴으로써 생산비용 및 생산 시간의 단축이 가능하며, 소경 공구를 이용한 고속 고회전 가공으로 고정밀 가공이 가능한 방법으로 생산 효율성 및 정밀성의 증대를 동시에 추구할 수 있는 가공 방법이다. 고속 가공에서 공구의 절입 및 퇴출 시에 급격한 절삭력의 변화로 인하여 공구의 파손(breakout) 및 칩핑(chipping)의 발생 가능성이 보다 높다.(중략)

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.146-153
• /
• 1998

NC machines with 4 or 5 axes are capable of various tool approach motions, which makes interference-free and high machinablity machining possible. This paper deals with how to integrate these two advantages (interference-free and high machinability machining) in multi-axes NC machining with a ball-end mill. Feasible tool approach region at a point on a surface is first computed, then among which an approach direction is determined so as to minimize the cutting force required. Tool and spindle volumes are considered in computing the feasible tool approach region, and the computing time is improved by trans-forming surface patches into minimal enclosing spheres. A cutting force prediction model is used for estimating the cutting force. The algorithm is developed so as to be applied to 4- or 5-axes NC machining in common.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.69-74
• /
• 2000

Roughness of curved surfaces finished with flexible tools depends on the tool/work contact pressure and area. In this study, non-Hertzian closely conforming elastic contact theory is employed to analyze the tool/work contact and to generate a tool path producing a constant pressure at initial contact points. Finishing experiments on curved surfaced are conducted using the tool path. For comparison, curved surface finishing is also performed along the tool path producing a constant tool/work interference depth. It is demonstrated that the tool path of constant contact pressure improves the finished surface roughness.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.895-903
• /
• 2005

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path which is computed by slicing the deformed CL surface is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path generated by the proposed method is tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.441-442
• /
• 2012

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.50-55
• /
• 2004

Because of the development in mold industries, the geometrical form accuracy of the milled surface is getting more and more important. It has been known that the geometrical form accuracy is affected by machine conditions, cutting conditions, tool conditions and tool path and so on. Among them, the tool approaching path causes the change in material removal per tooth at the end of each machining cycle. And, this change generates the geometrical form error around the region where the tool engages the workpiece initially. So, it is impossible to eliminate the geometrical error caused by the tool approaching path. Thus, characteristics of this geometrical error are studied analytically and experimentally to minimize this region.