• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.118-123
• /
• 2015

IT environment gets more complicated in terms of open platform, network standards, device design and hardware, etc. Smart network and application are in the fields of corporate as well as national competition for future fusion technology. In development environment focused on computers, the ideas of authoring tool have been presented in terms of improved software productivity. In smart environment where subdividing works are consecutively done, current authoring tool should be effectively updated for effective development of programs and easier access to business works. The basic concept of a new conceptual App development tool, Smart App Authoring Tool, which has been designed in this study and enables to apply on-site requirements to smart phones, is to develop Apps on the level using easy-to-learn Word or Excel in a computer. Therefore, this study is intended to design a conceptual Smart App Authoring Tool to optimize the cost and time for developing and maintaining new application services under various smart phone platform environments. Based on the performance of smart app authoring tool herein, every people can develop a smart app program at moderate level. So this paper have designed a conceptual smart app authoring tool. This study presented educational efficiency of the authoring tool by developing business Apps under various business environments and applying them under university and high school environments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.121-126
• /
• 2015

In this research, a tool was developed for the rapid performance of three-dimensional finite element analysis (3D FEA) of a machine tool spindle system made of a shaft and bearings. It runs the FEA with data, such as the bearing stiffness and the coordinates of the points, to define the section of the shaft, bearing positions, and cutting point. developed for the spindle system and then implemented with the tool using an object-oriented programing technique that allows the use of the objects of the CAD system used in this research. Graphic user interfaces were designed for a user to interact with the tool. It provides rapid evaluation of the design of a spindle system, and therefore, it would be helpful to identify a near optimal design of a spindle system based on, say, static stiffness with design changes and, consequently, FEA.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.59-64
• /
• 2002

Recently the applications of high speed machining are increasing due to the need for high performance and high accuracy machining and machining for difficult-to-cut material. However, the high speed machining also accompanies some problems: the product quality can be degraded due to the tool wear and the product cast can go up due to frequent tool replacements. Therefore, it is necessary to develop a technique of quantitative tool wear measurement to determine the precise timing for tool replacement. In this respect, this study suggests a reliable technique far the reduction of error components by developing a system using a CCD camera and an exclusive jig to be able to precisely measure the size of tool wear in flat end mill for high speed machining.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.16-20
• /
• 2007

Although conventional contour parallel tool paths obtained from geometric information have successfully been used to produce desired shapes, they seldom consider physical process concerns such as cutting forces and chatter. In this paper, we introduce an optimized contour parallel path that maintains a constant material removal rate at all times. The optimized tool path is based on a conventional contour parallel tool path. Additional tool path segments are appended to the basic path to achieve constant cutting forces and to avoid chatter vibrations over the entire machining area. The algorithm was implemented for two-dimensional contiguous end milling operations with flat end mills, and cutting tests were conducted to verify the performance of the proposed method.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.3
• /
• pp.187-197
• /
• 2020

In order to avoid the high cost and high risk of demonstration mission of rendezvous-docking technology, missions using nanosatellites have recently been increasing. However, there are few successful mission cases due to many limitations of nanosatellites like small size, power limitation, and limited performances of sensor, thruster, and controller. To improve the probability of rendezvous-docking mission success using nanosatellite, a rendezvous-docking phase analysis tool for nanosatellites is developed. The tool serves to analyze the relative position and attitude control of the chaser satellite at the docking phase. In this tool, the Model Predictive Controller (MPC) is implemented as a controller, and Extended Kalman Filter (EKF) is adopted as a filter for noise filtering. To verify the performance and effectiveness of the developed tool for nanosatellites, simulation study was conducted. Consequently, we confirmed that this tool can be used for the analysis of relative position and attitude control for nanosatellites in the rendezvous-docking phase.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.56-61
• /
• 2002

CuFe$_2$O$_4$ ferrite was machined with cermet tools to clarify the machinability. The tool wear became the smallest at the cutting speed of 90m/min with the depth of cut of 0.2mm. The surface roughness became larger with increasing the cutting speed and the chamfer angle of tool. The tool with the chamfer angle of 15° showed the smallest wear. The surface roughness increased almost proportionally with the increase of chip size. The tool wear reduced with increasing feed in the depth of cut not more than 0.2mm.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.53-59
• /
• 2011

End milling is available for machining the various shape of products and has been widely applied in many manufacturing industries. The quality of products depends on a machine tool performance and machining conditions. Recognition characteristics of the cutting condition is becoming a critical requirement for improving the utilization and flexibility of present-day CNC machine tools. The measurement of tool wear would be performed by coordinate-measuring machine(CMM). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, on-line measurement(OLM) system was applied for a tool wear measurement. This study shows a reliable technique for the reduction of machining error components by developing a system using a CCD camera and machine vision to be able to precisely measure the size of tool wear in flat end milling for CNC machining. The CCD camera and machine vision attached to a CNC machine can determine tool wear quickly and easily.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.154-157
• /
• 2003

This paper presents an efficient real-time tool-path planning method for interpolation of NURBS surfaces in CNC machining. The proposed tool-path planning method is based on an improved iso-scallop strategy and can provide better precision than the existing methods. The proposed method is designed such that tool-path planning is easily managed in realtime. It proposed a new algorithm, for regulation of a scallop height, which can efficiently generate tool-paths and can save machining time compared with the existing method. Through computer simulations, the performance of the proposed method is analyzed and compared with the existing method in terms of feedrate. total machining time and a degree of constraint on the scallop height.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.388-392
• /
• 2003

As the machine tool industry progresses, the performance of cutting tools also needs to be of good quality and specialized. If the existing metal cutting tool tip is coated properly, its life would be longer and the machining of a difficult-to-cut material also could be possible. For the development of the high quality cutting tool, the applicabilities of TiAIN coating deposited by PVD on the cutting insert were experimentally investigated. The various measurements, such as, SEM micrograph, XRD pattern, AFM surface morphology, and hardness were performed to cross-check the possibility and availability of TiAIN coated tool in the field. The effects of it is successful and we hope to see good results in many fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.311-314
• /
• 1995

This paper presents a method for measuring tool wear parameters based on two dimensional image information. The tool wear images were obtained from an ITV camera with magnifying and lighting devices, and were analyzed using image processing techniques such as thresholding, noise filtering and boundary tracing. Thresholding was used to transform the captured gray scale image into a binary image for rapid sequential image processing. The threshold level was determined using a novel technique in which the brightness histograms of two concentric windows containing the tool wear image were compared. The use of noise filtering and boundary tracing to reduce the measuring errors was explored. Performance tests of the measurement precision and processing speed revealed that the direct method was highly effective in intermittent tool wear monitoring.