• 제목/요약/키워드: Tool Setting

검색결과 437건 처리시간 0.023초

영아와 어머니의 상호작용에 관한 단기 종단 연구 (A Short-Term Longitudinal Study on Infant and Mother Interaction)

  • 김미옥;나종혜;현온강
    • 가정과삶의질연구
    • /
    • 제25권5호
    • /
    • pp.167-183
    • /
    • 2007
  • The purpose of this study was to investigate the changes in infant-mother interactions and to measure infant-mother interaction, mutuality, and reciprocity at the 2nd and 6th postnatal monthperiods. Infant-mother interaction was assessed in the mornings, afternoons, and evenings in the 2nd and 6th postnatal months, by filming unstructured free play in the home and analyzing 28 of these infant-mother film recordingsusing two trained observers. This study can be summarized in five points. First, the separate frequency distribution of each category in MIIBR's maternal behavior was as follows: the frequencies of vocalization category, the kinesthetic exercise & physical contact category, the physical caregiving category, and theuse of play tool category. These all showed changes in the 6th postnatal month compared to the 2nd postnatal month. Second, the separate frequency distribution of each category in MIIBR's infant behavior was as follows: the frequencies of physical behavior category, the vocalization category, and the play behavior category. These also all showed changes in the 6th postnatal month compared to the 2nd postnatal month. Third, the mutuality and reciprocity of mother interaction decreased in the 2nd postnatal month compared to the 6th postnatal month. Fourth, mutuality and reciprocity in the infant interaction increased in 2nd postnatal month compared to the 6th postnatal month. Fifth, mutuality and reciprocity in the infant-mother interaction increased in 2nd postnatal month compared to the 6th postnatal month. In conclusion, it is evident that infant-mother interactions change over time. This study bears particular significance in setting a foundation for the theoretical basis of the interaction between infant and mother by observation.

<라이온 킹>에 나타난 정서표현의 시각이미지 분석 : 그레이브스 명암이론과의 관계를 중심으로 (Analysis on Emotional visual image in Lion King : Focusing on the relationship with Graves theory)

  • 김광환
    • 만화애니메이션 연구
    • /
    • 통권15호
    • /
    • pp.73-88
    • /
    • 2009
  • 이 논문에서는 시각적으로 명암이 인간의 정서에 영향을 미친다는 그레이브스의 명암이론을 적용하여 "라이온 킹" 에서 사용된 명암의 유형을 분석하고 작품 내에서 시각적으로 표현된 명암이 내러티브에서 전개되는 정서의 흐름과 어떠한 관계를 맺고 있는지에 대한 유형을 분석하였다. 이를 통하여 명암이 시각이미지에 끼치는 영향과 더불어 정서적인 분위기 표현에 중요한 요소로 작용한다는 점을 규명하고자 하였다. 애니메이션에서는 실사 영화와는 달리 내러티브상에서 전개되는 캐릭터들의 정서적 변화에 따른 이미지 연출이 더욱 강조 된다. 이는 관객들의 감정이입을 강화시키는 중요한 수단이 된다.

  • PDF

Morphometrical Study of Uncinate Processes and Vertebral Body of Cervical Spine

  • Lee, Tae-Hoon;Kim, Sang-Jin;Chung, In-Hyuk
    • Journal of Korean Neurosurgical Society
    • /
    • 제51권5호
    • /
    • pp.247-252
    • /
    • 2012
  • Objective : The anatomical knowledge is the most important and has a direct link with success of operation in cervical spine surgery. The authors measured various cervical parameters in cadaveric dry bones and compared with previous reported results. Methods : We made 255 dry bones age from 19 to 72 years (mean, 42.3 years) that were obtained from 51 subjects in 100 subjects who donated their bodies. All measurements from C3-C7 levels were made using digital vernier calipers, standard goniometer, and self-made fix tool for two different cervical axes (canal and disc setting). We classified into 4 groups (uncinate process, vertebral body, lamina, and pedicle) and measured independently by two neurosurgeons for 28 parameters. Results : We analyzed 23970 measurements by mean value and standard deviations. In comparing with previous literatures, there are some different results. The mean values for uncinate process (UP) width ranged from 5.5 mm at C4 and 5 to 6.3 mm at C3 and C7 in men. Also, in women, the mean values for UP width ranged from 5.5 mm at C5 to 6.3 mm at C7. C7 was widest and C5 was most narrow than other levels. The antero-posterior length of UP tended to increase gradually from C3 to C6. The tip way, tip distance, and base distance of UP also showed increasing pattern from C3 to C7. Conclusion : These measurements can provide the spinal surgeons with a starting point to address bony architectures surrounding targeted soft tissues for safeguard against unintended damages during cervical operation.

An Improved PCR-RFLP Assay for Detection and Genotyping of Asymptomatic Giardia lamblia Infection in a Resource-Poor Setting

  • Hawash, Yoursry;Ghonaim, M.M.;Al-Shehri, S.S.
    • Parasites, Hosts and Diseases
    • /
    • 제54권1호
    • /
    • pp.1-8
    • /
    • 2016
  • Laboratory workers, in resource-poor countries, still consider PCR detection of Giardia lamblia more costly and more time-consuming than the classical parasitological techniques. Based on 2 published primers, an in-house one-round touchdown PCR-RFLP assay was developed. The assay was validated with an internal amplification control included in reactions. Performance of the assay was assessed with DNA samples of various purities, 91 control fecal samples with various parasite load, and 472 samples of unknown results. Two cysts per reaction were enough for PCR detection by the assay with exhibited specificity (Sp) and sensitivity (Se) of 100% and 93%, respectively. Taking a published small subunit rRNA reference PCR test results (6%; 29/472) as a nominated gold standard, G. lamblia was identified in 5.9% (28/472), 5.2%, (25/472), and 3.6% (17/472) by PCR assay, $RIDA^{(R)}$ Quick Giardia antigen detection test (R-Biopharm, Darmstadt, Germany), and iodine-stained smear microscopy, respectively. The percent agreements (kappa values) of 99.7% (0.745), 98.9% (0.900), and 97.7% (0.981) were exhibited between the assay results and that of the reference PCR, immunoassay, and microscopy, respectively. Restriction digestion of the 28 Giardia-positive samples revealed genotype A pattern in 12 and genotype B profile in 16 samples. The PCR assay with the described format and exhibited performance has a great potential to be adopted in basic clinical laboratories as a detection tool for G. lamblia especially in asymptomatic infections. This potential is increased more in particular situations where identification of the parasite genotype represents a major requirement as in epidemiological studies and infection outbreaks.

패션 점포 내 판매원과 다른 고객에 대한 신체적 매력과 자기이미지 일치 효과 (Impact of Salespersons and Other Customers in a Fashion Store -Focus on Physical Attractiveness and Self-image Congruence-)

  • 김윤정;이유리;김보람
    • 한국의류학회지
    • /
    • 제38권6호
    • /
    • pp.783-795
    • /
    • 2014
  • This study investigates how the physical attractiveness of salespeople and other customers and self-image congruence influence customer perception and brand attitude. As a result of a pretest, four types of pictorial stimuli were developed: physical attractiveness of salespeople (high/low) ${\times}$ that of other customers (high/low). Stimuli were developed using Photoshop CS. A total of 550 samples in two experiments were used and all respondents were women in their 20s and 30s. Data were analyzed using ANOVA and SEM. The result of analysis shows that the physical attractiveness of salesperson had a significant impact on perceived quality, but that of other customers did not. However, self-image congruence with other customers shows a significant effect on perceived quality; however, salespeople did not. The impact of the perceived product quality on brand attitude is higher than perceived service quality. This study adds to fashion retailing literature by demonstrating that physical attractiveness and self-image congruence can influence a customers' perception of product or service quality and brand attitude. It provides interesting insight into how retailers can use social factors as a strategic tool in a retail setting.

Load Modeling based on System Identification with Kalman Filtering of Electrical Energy Consumption of Residential Air-Conditioning

  • Patcharaprakiti, Nopporn;Tripak, Kasem;Saelao, Jeerawan
    • International journal of advanced smart convergence
    • /
    • 제4권1호
    • /
    • pp.45-53
    • /
    • 2015
  • This paper is proposed mathematical load modelling based on system identification approach of energy consumption of residential air conditioning. Due to air conditioning is one of the significant equipment which consumes high energy and cause the peak load of power system especially in the summer time. The demand response is one of the solutions to decrease the load consumption and cutting peak load to avoid the reservation of power supply from power plant. In order to operate this solution, mathematical modelling of air conditioning which explains the behaviour is essential tool. The four type of linear model is selected for explanation the behaviour of this system. In order to obtain model, the experimental setup are performed by collecting input and output data every minute of 9,385 BTU/h air-conditioning split type with $25^{\circ}C$ thermostat setting of one sample house. The input data are composed of solar radiation ($W/m^2$) and ambient temperature ($^{\circ}C$). The output data are power and energy consumption of air conditioning. Both data are divided into two groups follow as training data and validation data for getting the exact model. The model is also verified with the other similar type of air condition by feed solar radiation and ambient temperature input data and compare the output energy consumption data. The best model in term of accuracy and model order is output error model with 70.78% accuracy and $17^{th}$ order. The model order reduction technique is used to reduce order of model to seven order for less complexity, then Kalman filtering technique is applied for remove white Gaussian noise for improve accuracy of model to be 72.66%. The obtained model can be also used for electrical load forecasting and designs the optimal size of renewable energy such photovoltaic system for supply the air conditioning.

초소경 엔드밀링을 이용한 미세 가공특성 분석 및 응용가공 (Analysis of Micro Machining Characteristics using End-milling and Its Applications)

  • 최환진;박언석;전은채;제태진;최두선
    • 한국정밀공학회지
    • /
    • 제29권12호
    • /
    • pp.1279-1284
    • /
    • 2012
  • Micro structures which are widely used at various fields are commonly fabricated by lithograph, etching and laser methods. Recently, with the emergence of micro tools and ultra-precision machine tools, fabrication of the micro structures obtained using end-milling are studied. However, there are some problems due to the diameter of the micro end-mill getting smaller below $100{\mu}m$. The micro run-out resulted from miniaturization of end-mills have influence seriously on accuracy of micro structures. The error of run-out with a tooling jig showed a decrease of about $9.3{\mu}m$. Furthermore, micro structures with width of $30{\mu}m$ could be applied through experiments of slot machining obtained using 30 and $50{\mu}m$ end-mill. Also, narrow angle structures with $30^{\circ}$ angle could be applied through analysis of machining acute angle structures. Based on basic experiments, micro fluidics channels and spiral patterns for air bearing were machined.

공동주택 화재를 대상으로 한 가상현실(VR) 프로그램 개발 및 호응도 조사 (Development and Review of Virtual Reality Fire-Training Program)

  • 김용철;정무헌;류충;김선규
    • 한국화재소방학회논문지
    • /
    • 제33권6호
    • /
    • pp.159-164
    • /
    • 2019
  • 본 연구는 최근 빈번하게 발생하고 있는 공동주택 화재로 인한 인명피해 최소화를 위해 최신 IT 기법을 활용하여 공동주택(아파트)의 화재 상황을 재현 한 가상현실(VR) 화재 프로그램을 개발하고 학습도구로서의 활용가능성을 검증하였다. 이를 위해 공동주택 단위평면 크기, 가족구성 등 기본환경을 설정하였으며 공동주택에서 일어날 수 있는 화재 시나리오를 개발하여 게임형식으로 가상현실 프로그램을 구현하였다. 아울러 개발된 가상현실(VR) 화재 프로그램에 대한 호응도를 살펴보기 위해 설문조사를 실시하였다. 설문결과 가상현실(VR) 화재 프로그램에 대한 호응도가 매우 높게 나타났으며 특히 가상현실 화재 프로그램을 통한 학습효과가 높아 학습기기로서의 유효성을 확인할 수 있었다.

한의사의 전침사용 임상실태 조사보고 (A Survey on the Use of Electroacupuncture by Traditional Korean Medicine Doctor)

  • 문진석;이상훈;김정은;김보영;최선미
    • Journal of Acupuncture Research
    • /
    • 제28권6호
    • /
    • pp.53-68
    • /
    • 2011
  • Objectives : This study was conducted to investigate status of electroacupuncture(EA) stimulation and adverse effects as a basic information of EA clinical treatment. Methods : The survey was carried twice by e-mail and online service against the traditional Korean medicine doctors registered in the Association of Korea Oriental Medicine. Results : Seventy-eight percent of 284 responders used the EA. The EA was the most widely used for the stimulation of the meridian-muscle on musculo-skeletal pain. In terms of methodological procedure, doctors mainly apply acupuncture with the needle of 2 or 3 pairs of 0.25mm diameter to the depth of 10-50mm for 15 minutes. Respondents used mainly at the frequency of 10Hz and the automatic setting at the intensity of around 3-4 grade. The adverse effects were investigated less then 3% in the 45.9% respondents and non in the 40.5%. The most priority content for better EA treatment was "development of the effective stimulation program". Conclusion : In the result of survey, the frequency of practical use of EA was very high but the applied disease was concentrated in the pain. Hereafter, if the clinical study for safety and effectiveness is secured and more convenient EA tool is developed, the clinical application of the EA is likely to be more expanded.

의료기술발달에 대한 간호사의 지각과 전문직 자아개념 (Nurse's Perception of Technological Development and Professional Self-Concept)

  • 노춘희;송경애
    • 대한간호학회지
    • /
    • 제30권5호
    • /
    • pp.1368-1378
    • /
    • 2000
  • This study was conducted to explore the nurse's perception of technological development and professional self-concept. The research subjects were 560 clinical nurses in Korea, who worked the general hospitals in Seoul, Kyeonggi, and the Kangwon province. Data sampling was done for the month, of December. 1997. The research tool consisted of 82 items questionnaires which were demographic data, TIQ, PSCNI. The research findings were as follows: 1. Nurses perceived the technological development as slightly positive (Mean =48.8). Also, nurses saw that the fastest developing technological nursing unit was the cardiac care unit, while the lowest technological developing nursing unit was the psychiatric unit. 2. The view of technological development was found to be significantly different according to religion (P=.0109), marital status (P=.0431), and the practical setting (P=.0048). Professional self concept was significantly different according to age (P=.0001), religion (P=.0001), education (P=.0007), marital status (P=.0000), career (P=.0001), and position (P=.0000). 3. The relationship between a nurse's perception of technological development and professional self-concept was highly correlated(r=.26, P=.0001). In the results of the multiple regression, the factors influencing professional self-concept were career, the nurse's perception of technological development, the level of technological development in nursing unit, and education. All these parameters showed the explaining power of 15.4% of the professional self-concept. In conclusion, nurses recognized the technological development was related to the professional self-concept. This study shed light on the meaning of technological development and vision of the nursing profession. Inservice education program should be developed to help the adaptability to technological development and conduct the qualitative research to explore the world of technological development which the nurses are experiencing in nursing.

  • PDF