• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.

• The Journal of the Korea Contents Association
• /
• v.3 no.3
• /
• pp.11-18
• /
• 2003

Error diffusion is a procedure for generating high quality bilevel images from continuous-tone images but blurs the edge information. To solve this problem, we propose the improved method appling edge enhanced weights based on local characteristic of the original images. We consider edge information as local characteristic. First, we produce edges by appling 3$\times$3 sobel operator to the original image. The edge is normalized from 0 to 1. Edge information weights are computed by using sinusoidal function and the normalized edge information. The edge enhanced weights are computed by using edge information weights multiplied input pixels. The proposed method is compared with conventional methods by measuring the edge correlation and quality of the recovered images from the halftoned images. The proposed method provides better quality than the conventional method due to the enhanced edge and represents efficiently the detail edge. Also, the proposed method is improved in edge representation than the conventional method.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.760-770
• /
• 2008

Though flash images are in general less noisy and present details better than no-flash images, they may sometimes be unnaturally saturated to white/gray-tone and have ridiculously strong shadows around the foreground objects due to the strong flashlight. In this paper, we propose a new algorithm to improve the color quality of the flash images by transfer of the color information of the same-scene no-flash images. The proposed algorithm preserves the vivid edges and the clean details of the flash image while transferring natural colors of the no-flash image, so that it makes the constructed images of the better subjective quality. The performance of the proposed algorithm is verified by experiment which applied to the two types of images with different noise levels.

• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.91-99
• /
• 2018

Korean stops are currently undergoing a tonogenetic sound change, as found in the Seoul dialect in which a merged VOT of aspirated and lax stops induces F0 to be the primary cue for distinguishing the two stops and the lax stops have lower F0 than the aspirated stops. In tonal languages, low tone is produced with a breathy voice. This study investigated whether there are changes in voice quality with respect to the tonogenetic sound change of Korean stops. Two age groups speaking the Seoul dialect participated in this study: five females and six males born in the 1940s and 1950s and nine females and eight males born in the 1980s and 1990s. This study replicated previous findings of VOT and F0 and further examined H1-H2, H1-A1, and H1-A2 to see how they correlate with the sound change. In the older and younger generations, H1-H2, H1-A1, and H1-A2 were significantly lower after the tense stops than after the aspirated and lax stops, but they were not significantly different after the aspirated and lax stops. However, the younger females exhibited some different results for H1-H2 and H1-A2 than the older generation. In the younger females, the H1-H2 mean was higher after the aspirated stops than it was after the lax stops at the vowel onset, and the H1-H2 difference increased at the vowel midpoint. Although there was an inter-speaker variation in the results of H1-H2 and H1-A1, analyses of individual speakers showed that the H1-H2 and H1-A1 were higher after the lax stops than after the aspirated stops in the younger female speakers. These results indicate that lax stops tend to be breathier than aspirated stops in the younger female speakers. They also indicate that changes in voice quality are on Korean stops with tonal sound change, but are still developing.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.29-37
• /
• 2008

With the rapid development of display technology as well as the diversity of display, image quality assessment plays an important role in display color reproduction. The image quality has described by objective evaluation based on the physical measured data, such as contrast ratio, color reproduction range, color temperature, and gamma characteristics, etc., however, the final judgement is achieved by perceptual quality assessment of observers. Therefore, it is necessary to investigate the relationship between physical performance of display and perceptual image quality. Thus, in order to evaluate objectively the color reproduction characteristics of two mobile displays, TFT-LCD and AMOLED, we measured the darkroom contrast ratio of full screen, luminance and color temperature of full-screen white, full-screen gray and color linearity, tone reproduction of color scales for each RGB primary, and color reproduction range. Then the pair-wise comparison is implemented for image experts and naive observers not only to judge their preference on principal evaluation attributes but also to subjectively describe perceived image quality. Through two evaluation processes, we derived the objective bases that can prove the results of subjective image quality assessment by interconnecting physical factors that have influence on observers' preference judgements. Finally, this paper provided important information for improving the image quality and increasing preference from an observer's point of view.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.1-13
• /
• 2013

This study found fit optimum C, M, Y, K solid density and $CIEL^*a^*b^*$ value to paper & ink as well as check about printing machine state for color management in H-UV waterless off-set printing first. These values applied to GRACoL G7 calibration method. This method is one of color standard management method of printing. GRACoL G7 calibration method is possible stable tone reappearance by controlling gray balance by NPDC(Natural Printing Density Curve). Also, this study used values to make device profile as result that is gotten by application of GRACoL G7 calibration method. This profile was applied to CMS(Color Management System) of H-UV waterless off-set printing, and the result was possible by color management that correspond in printing quality standard of ISO 12647-2 and GRACol 2006 specifications.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.73-84
• /
• 2011

In the 2000s, digital HDTV which is sensitive for color temperature and illumination in videos has witnessed many changes to lighting techniques and the next-generation UHDTV will see its resolution being improved up to as 16 times as that of existing high-definition TV. As a result, visible effects by lighting is expected to work more importantly for viewers. When color temperature conversion filters are used for current broadcasting production, the intensity of illumination and luminance can be lowered as well as people's skin tone can be distorted. For this reason, high-quality images are materialized by analyzing the correlation between color temperature, illumination and luminance.

• Journal of the Korean Society of Costume
• /
• v.50 no.4
• /
• pp.21-36
• /
• 2000

History confirms that the eastern style was reflected in various parts of the western culture including clothing. In this paper we show some evidence that the influence of India on the French clothing during the neo-classical period(1789-1820) was substantial. Among others, the use of muslin, kashmir shawl and banyan during the period is greatly emphasized. The muslin imported from India was used as the textile for the chemise mown, a typical clothing during the period. Indian muslin was used, because it was of better quality compared to the muslin manufactured in England and France and it was not expensive. The kashmir shawl imported from kashmir in India was also a popular item in Europe not only because it matched well with simple color of chemise gown, but because it expressed the tone of Greek and Roman. Banyan which was most popular clothing worn by men in 18th century Europe originally came from India, which goes back to the Kaftan clothing in the Central Asia. Banyan was an informal home style clothing different from the conventional tight men's wear. It is true that the muslin, kashmir shawl, and banyan also became fashion items throughout the 19th and 20th century to the English and other European people. However, we limited our attention to the influence of India on France because we think the French Revolution and Napoleon's conquest of Egypt are far more important factors when considering the influence of Indian culture on Europe.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.64-67
• /
• 2004

The present study describes an experimental work to reduce supersonic jet noise using a control wire device that is placed into the supersonic jet stream. The jet pressure ratio is varied to obtain the supersonic jets which are operated in a wide range of over-expanded to moderately under-expanded conditions. The wire device is composed of long cylinders with a very small diameter. X-type wire device is applied to control the supersonic jet noise, and its location is varied to investigate the effect of the control wire device on supersonic jet noise. A high-quality Schlieren optical system is used to visualize the flow field of supersonic jet with and without the control wire device. Acoustic measurement is performed to obtain the overall sound pressure level and noise spectra. The results obtained show that the present wire device destroys the shock-cell structures, reduces the shock strength, and consequently leading to a substantial suppression of supersonic jet noise.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.870-878
• /
• 1998

The cross-flow fan which constitutes a fan-duct system with a stabilizer and a scroll casing is widely used in many air-ventilating and air-conditioning devices. Its ooperating points of high efficiency and loading conditions frequently induce a annoying sharp tonal component of discrete frequency on the noise spectrum, which is open called as a BPF(Blade-Passing-Frequency) noise and degrades the sound quality of the devices. this BPF tone has been one of the defects of the cross-flow fan. This study proposes two methods in order to reduce this tonal noise component, which are the random distributions of the fan blades and the skewed shapes of the stabilizer. The proposed methods are verified by a simple analytical model and are applied in manufacturing the cross-flow fan and the stabilizer samples. Some experiments are carried out to verify the reduction capability of BPF tones of above two schemes and the experimental results are analyzed. The comparison between two method is also carried out.