• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.9
• /
• pp.500-505
• /
• 2003

The target of the ULTC(Under Load Tap Changer) control purpose is to minimize the operation number of the tap of the ULTC doing the error voltage which is the difference between the measured bus voltage End the reference bus voltage of the receiving end becomes less than the tolerance limits. The existing ULTC control method controls each ULTC considering only its bus voltage of the receiving end. However, this method did not cons der the coordinated control of the ULTCs of the system. In this paper, I proposed a coordinated control of the ULTC in :he loop power system using the Jacobian matrix. To show the validity of the proposed method, I made simulations for three cases: no action of the ULTC, the control of the ULTC by the existing control method, and the control of the ULTC by the coordinated control among the ULTCs of the system. The simulation result shows that the proposed method has more improvement of the operation of the ULTC than other methods.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.90-94
• /
• 1998

The parallel inverter is popularly used because of its fault-tolerance capability, high-current outputs at constant voltages and system modularity. The conventional parallel inverter usually employes active and reactive power control or frequency and voltage droop control. However, these approaches have the disadvantages that the response time of parallel inverter control is slow against load and system parameter variation to calculate active, reactive power, frequency and voltage. This paper describes a novel control scheme for power equalization in parallel connected inverter. The proposed scheme has a fast power balance control response, a simplicity of implementation, and inherent peak current limiting capability since it employes a instantaneous current/voltage control with output voltage and current balance and output voltage regulation. A design procedure for the proposed parallel inverter controller is presented. Futhermore, the proposed control scheme is verified through the simulation in various cases such as the system parameter variation, the control parameter variation and the nonlinear load condition.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.587-600
• /
• 2016

Purpose: This paper evaluates the performance of the pre-control(PC), an alternative to statistical process control techniques and compares with a control chart considering the tolerance of process. Methods: The previous studies for PC have drawbacks that PC with two linked stages, qualification and running, are discussed separately and independently. Hence this paper analyzes the performance of PC by integrating two stages. Results: Average outgoing quality limits to grasp the outcome of PC are provided by computational results for two process capability indexes, $C_p$ and $C_{pk}$ and the usefulness of PC from comparative experiments with modified control charts is commented. Conclusion: Helpful guidelines for quality managers to apply PC in practice and areas of process for PC to be more benefit are presented.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1680-1690
• /
• 2006

As a promising and novel manufacturing technology, laser aided direct metal deposition (DMD) process produces near-net-shape functional metal parts directly from 3-D CAD models by repeating laser cladding layer by layer. The key of the build-up mechanism is the effective control of powder delivery and laser power to be irradiated into the melt-pool. A feedback control system using two sets of optical height sensors is designed for monitoring the melt-pool and real-time control of deposition dimension. With the feedback height control system, the dimensions of part can be controlled within designed tolerance maintaining real time control of each layer thickness. Clad nugget shapes reveal that the feedback control can affect the nugget size and morphology of microstructure. The pore/void level can be controlled by utilizing pulsed-mode laser and proper design of deposition tool-path. With the present configuration of the control system, it is believed that more innovation of the DMD process is possible to the deposition of layers in 3-D slice.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2108-2110
• /
• 2001

Used analog control systems have been converted into digital control systems due to performance degradation and difficulty of maintenance. There are few domestic DCS (Distribued Control System)s that have been applied to power plant. To apply a domestic DCS to power plant, the reliability, redundacny, and fault tolerance of DCS is important. Besides those items, the control action of control function block is also important. In this paper, we describe the requirements that PID control function block has to have, and implement a PID control function block that satisfies those requirements. Finally, real control result using an implemented PID function block in thermal power plant shows the validity of an implemented PID control function block.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.91-106
• /
• 2013

Exserohilum turcicum is considered serious destructive disease of maize (Zea mays L.) in North Korea. This study aimed to understand genetic inheritance and combining ability of newly bred lines of maize tolerant to E. turcicum by diallel crosses. Three diallel sets for two different ecological regions and one agronomic trait; eastern (E), northern (N) and stay green (SG) involving 29 inbred lines were tested in eight locations of 2000 and 2001. E. turcicum infections were under natural conditions, respectively. Lines used were selected for high yield potential in test crosses with good agronomic traits and tolerance to biotic and abiotic stresses. Selection for race specific high resistance to biotic stresses was avoided to select quantitatively inherited genes. Host plant responses to E. turcicum were rated on a scale of 1 (highly tolerant) to 9 (highly susceptible). Highly significant variations were recorded in all trials. General combining ability (GCA) mean square was roughly twice that of specific combining ability (SCA). The genotype (G) by environment (E) interaction was highly significant. The overall results of genetic studies in three diallel sets show that genetic control for inbred tolerance to E. turcicum is polygenic and quantitatively inherited. New inbreds; E-3, N-1 and SG-4 confer better tolerance to E. turcicum than the widely used inbreds; Mo17, and B73. Proper use of genetic information from this study shall increase of corn production under high E. turcicum infection in the Far Eastern Regions of Korea and China.

• BMB Reports
• /
• v.47 no.1
• /
• pp.27-32
• /
• 2014

Plant abiotic stress tolerance has been modulated by engineering the trehalose synthesis pathway. However, many stress-tolerant plants that have been genetically engineered for the trehalose synthesis pathway also show abnormal development. The metabolic intermediate trehalose 6-phosphate has the potential to cause aberrations in growth. To avoid growth inhibition by trehalose 6-phosphate, we used a gene that encodes a bifunctional in-frame fusion (BvMTSH) of maltooligosyltrehalose synthase (BvMTS) and maltooligosyltrehalose trehalohydrolase (BvMTH) from the nonpathogenic bacterium Brevibacterium helvolum. BvMTS converts maltooligosaccharides into maltooligosyltrehalose and BvMTH releases trehalose. Transgenic rice plants that over-express BvMTSH under the control of the constitutive rice cytochrome c promoter (101MTSH) or the ABA-inducible Ai promoter (105MTSH) show enhanced drought tolerance without growth inhibition. Moreover, 101MTSH and 105MTSH showed an ABA-hyposensitive phenotype in the roots. Our results suggest that over-expression of BvMTSH enhances drought-stress tolerance without any abnormal growth and showes ABA hyposensitive phenotype in the roots.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.818-823
• /
• 2012

Tall fescue (Festuca arundinacea Schreb.) is an important cool season forage plant that is not well suited to extreme heat, salts, or heavy metals. To develop transgenic tall fescue plants with enhanced tolerance to abiotic stress, we introduced an alfalfa Hsp23 gene expression vector construct through Agrobacterium-mediated transformation. Integration and expression of the transgene were confirmed by polymerase chain reaction, northern blot, and western blot analyses. Under normal growth conditions, there was no significant difference in the growth of the transgenic plants and the non-transgenic controls. However, when exposed to various stresses such as salt or arsenic, transgenic plants showed a significantly lower accumulation of hydrogen peroxide and thiobarbituric acid reactive substances than control plants. The reduced accumulation of thiobarbituric acid reactive substances indicates that the transgenic plants possessed a more efficient reactive oxygen species-scavenging system. We speculate that the high levels of MsHsp23 proteins in the transgenic plants protect leaves from oxidative damage through chaperon and antioxidant activities. These results suggest that MsHsp23 confers abiotic stress tolerance in transgenic tall fescue and may be useful in developing stress tolerance in other crops.

• Advances in Traditional Medicine
• /
• v.10 no.2
• /
• pp.90-102
• /
• 2010

Effect of ethanol (ASE) and water (ASW) extracts of Argyreia speciosa on blood glucose and lipid profile was investigated in normoglycemic and Streptozotocin (STZ)-induced diabetic animals. In oral glucose and sucrose tolerance test, treatment with ASE and ASW (100 and 200 mg/kg) and Glidenclamide (10 mg/kg) significantly improved the glucose and sucrose tolerance in normal animals. In addition, respective treatment for fifteen-day resulted in significant percentage reduction in serum glucose (SG) ie., 30.39% (lower dose of ASE) and 33.21% (higher dose of ASW). In standardized STZ (50 mg/kg, iv)-induced diabetic rats, a single dose of ASE and ASW treatment exhibited reduction in SG levels at different time intervals compared to basal levels. Administration of both the doses of ASE and ASW for fifteen-day days exhibited greater percentage reduction in glycemia (24.6%, 24.7%, 23.9% and 21.9% respectively) and also ameliorated restored to near normal value of all tested lipid parameters. Further, treatment also exhibited significantly improved glucose tolerance over the period of 120 min compared to diabetic control group. Eventhough treatment failed to increase serum insulin levels significantly but peripheral utilization of insulin was increased as evident by insulin tolerance test. Taken together, present study supports the traditional usage of title plant in the treatment of diabetes mellitus.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1339-1348
• /
• 2015

In a distributed system environment based on a service-oriented architecture, separate systems collaborate to achieve the goals of the entire system by using services provided other systems. A service quality violation from using one service can cause runtime system failure in the environment. The existing self-adaptation methods follow fault tolerance mechanism that responds to a failure after a service quality violation. In other words, these methods are limited to responsive action. Therefore, a service-dependability-case based self-adaptation mechanism is necessary to preserve the dependability of the self-adaptive system. This paper demonstrates that the service-dependability-case based self-adaptation mechanism is better than QoS(quality of service)-based self-adaptation with fault tolerance to preserve the dependability of the self-adaptive system. Additionally, this paper suggests a method to present and analyze service dependability by using GSN(Goal Structuring Notation) which is the existing modeling method for the presentation of assurance cases, an action mechanism adapted using an analysis result of service-dependability-cases, a methods of leveraging the service-dependability-case based self-adaptation mechanism by following the service's life cycle, and the framework architecture including the major components and the interactions between the components in the control loop of the self-adaptation process.