• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.245-248
• /
• 2000

Modern aircraft composite structures are designed using a damage tolerance philosophy. This design philosophy envisions sufficient strength and structural integrity of the aircraft to sustain major damage and to avoid catastrophic failure. The only reasonable way to treat on the same basis all the conditions and uncertainties participating in the design of damage tolerant composite aircraft structures is to use the probability-based approach. Therefore, the model has been developed to assess the probability of structural failure (POSF) and associated risk taking into account the random mechanical loads, random temperature-humidity conditions, conditions causing damages, as well as structural strength variations due to intrinsic strength scatter, manufacturing defects, operational damages, temperature-humidity conditions. The model enables engineers to establish the relationship between static/residual strength safety margins, production quality control requirements, in-service inspection resolution and criteria, and POSF. This make possible to estimate the cost associated with the mentioned factors and to use this cost as overall criterion. The methodology has been programmed into software.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1003-1008
• /
• 2022

This paper proposes a method related to fault tolerance operation and characteristic analysis of asymmetric 6-phase permanent magnet synchronous motor. In general, motor drive systems with multi-phase structures can be continuously operated despite a reduction of power and speed by using a phase changeover or control techniques according to the failures. As a result, it is widely used in industrial fields such as aviation and defense, which require high efficiency and high reliability. In this paper, the second order ripple of the electrical fundamental freuqnecy occurs in the dq-axis currents of the synchronous coordinate system through mathematical analysis according to the switch open of the dual 3-phase inverter. Therefore, the fault tolerant operation method is presented by applying the fault detection method with a constant cycle for continuous operations. The effectiveness of the proposed fault tolerance operation method is verified through the several experiments.

• 한국초지조사료학회지
• /
• 제43권1호
• /
• pp.42-49
• /
• 2023

The plant-specific NAC transcription factors control various biological processes, including plant development and stress responses. We have isolated an ANAC032 gene, one of the NAC transcription factor family, which was highly activated by multi-abiotic stresses, including high salt and drought in Arabidopsis. Here, we generated transgenic plants constitutively expressing ANAC032 and its knockout to identify the functional roles of ANAC032 in Arabidopsis under abiotic stress responses. The ANAC032-overexpressing plants showed enhanced tolerance to salinity and drought stresses. The anac032 knockout mutants were observed no significant changes under the high salt and drought conditions. We also monitored the expression of high salt and drought stress-responsive genes in the ANAC032 transgenic plants and anac032 mutant. The ANAC032 overexpression upregulated the expression of stress-responsive genes, RD29A and ERD10, under the stresses. Thus, our data identify that transcription factor ANAC032 plays as an enhancer for salinity and drought tolerance through the upregulation of stress-responsive genes and provides useful genetic traits for generating multi-abiotic stress-tolerant forage crops.

• 생명과학회지
• /
• 제20권5호
• /
• pp.670-675
• /
• 2010

Autoimmune regulator gene (Aire)는 흉선에서 발현되며 promiscuous genes으로 알려진 흉선에서 자가항원 발현을 조절한다. Aire 와 promiscuous genes은 흉선에서 T세포 tolerance와 자가면역에 관여한다. 말초 조직 즉 림프절에서 Aire의 역할을 알아보고자 림프절 구성 세포중 하나인 fibroblastic reticular cell (FRC)을 분리 확립하였다. 마우스 림프절로부터 분리된 FRC에서 Aire의 발현을 확인하였고 또한 promiscuous antigen인 insulin의 발현도 확인하였다. Aire 과발현 플라스미드로 형질전환 후 배양 FRC에서 Insulin의 발현이 증가하였다. 이것은 Aire가 FRC에서 promiscuous gene의 발현을 조절한다는 것을 보여주며 peripheral selection과 연관되어 있을 수 있다는 것을 제시한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권6호
• /
• pp.491-502
• /
• 2022

The purpose of this study was to retrospectively investigate the upper and lower control limits of treatment planning parameters using EBT film based delivery quality assurance (DQA) results and to analyze the results of statistical process control (SPC) in helical tomotherapy (HT). A total of 152 patients who passed or failed DQA results were retrospectively included in this study. Prostate (n = 66), rectal (n = 51), and large-field cancer patients, including lymph nodes (n = 35), were randomly selected. The absolute point dose difference (DD) and global gamma passing rate (GPR) were analyzed for all patients. Control charts were used to evaluate the upper and lower control limits (UCL and LCL) for all the assessed treatment planning parameters. Treatment planning parameters such as gantry period, leaf open time (LOT), pitch, field width, actual and planning modulation factor, treatment time, couch speed, and couch travel were analyzed to provide the optimal range using the DQA results. The classification and regression tree (CART) was used to predict the relative importance of variables in the DQA results from various treatment planning parameters. We confirmed that the proportion of patients with an LOT below 100 ms in the failure group was relatively higher than that in the passing group. SPC can detect QA failure prior to over dosimetric QA tolerance levels. The acceptable tolerance range of each planning parameter may assist in the prediction of DQA failures using the SPC tool in the future.

• The Plant Pathology Journal
• /
• 제33권3호
• /
• pp.329-336
• /
• 2017

An experiment was conducted to evaluate the tolerance of micropropagated and mycorrhized alpinia plants to the parasite Meloidogyne arenaria. The experimental design was completely randomized with a factorial arrangement of four inoculation treatments with arbuscular mycorrhizal fungi (AMF) (Gigaspora albida, Claroideoglomus etunicatum, Acaulospora longula, and a non-inoculated control) in the presence or absence of M. arenaria with five replicates. The following characteristics were evaluated after 270 days of mycorrhization and 170 days of M. arenaria inoculation: height, number of leaves and tillers, fresh mass of aerial and subterranean parts, dry mass of aerial parts, foliar area, nutritional content, mycorrhizal colonization, AMF sporulation, and the number of galls, egg masses, and eggs. The results indicated a significant interaction between the treatments for AMF spore density, total mycorrhizal colonization, and nutrient content (Zn, Na, and N), while the remaining parameters were influenced by either AMF or nematodes. Plants inoculated with A. longula or C. etunicatum exhibited greater growth than the control. Lower N content was observed in plants inoculated with AMF, while Zn and Na were found in larger quantities in plants inoculated with C. etunicatum. Fewer galls were observed on mycorrhized plants, and egg mass production and the number of eggs were lower in plants inoculated with G. albida. Plants inoculated with A. longula showed a higher percentage of total mycorrhizal colonization in the presence of the nematode. Therefore, the association of micropropagated alpinia plants and A. longula enhanced tolerance to parasitism by M. arenaria.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3470-3476
• /
• 2012

본 연구에서는 현행 지적측량 관련 법률에서 규정하고 있는 지적측량에 대한 성과인정 범위와 적용 장비 규정, 관련 규정에서의 정확도와 적용 규정 등을 종합적으로 고찰하여 지적재조사에 관한 특별법에서 규정하고 있는 지적측량의 성과인정 범위에 적합한 지적측량 장비의 성능 기준을 마련해 보고자 하였다. 연구성과는 다음과 같다. 적용 장비의 성능과 성과인정 범위에 대해 현행 법률과 지적재조사에 관한 특별법 규정의 비교를 통해 지적재조사사업시 장비의 성능 개선이 필요한 부분에 대해서 기초측량과 세부측량으로 구분하여 기준을 제시하였다. 본 연구의 성과는 지적재조사사업을 위한 기본계획수립시 측량 장비 수급 계획 등에 기초자료로 활용이 가능하다.

• Nutrition Research and Practice
• /
• 제2권4호
• /
• pp.252-258
• /
• 2008

This study was designed to determine whether acute fructose or sucrose administration at different levels (0.05 g/kg, 0.1 g/kg or 0.4 g/kg body weight) might affect oral glucose tolerance test (OGTT) in normal and type 2 diabetic rats. In OGTT, there were no significant differences in glucose responses between acute fructose- and sucrose-administered groups. However, in normal rats, the AUCs of the blood glucose response for the fructose-administered groups tended to be lower than those of the control and sucrose-administered groups. The AUCs of the lower levels fructose- or sucrose-administered groups tended to be smaller than those of higher levels fructose- or sucrose-administered groups. In type 2 diabetic rats, only the AUC of the lowest level of fructose-administered (0.05 g/kg body weight) group was slightly smaller than that of the control group. The AUCs of fructose-administered groups tended to be smaller than those of the sucrose-administered groups, and the AUCs of lower levels fructose-administered groups tended to be smaller than those fed higher levels of fructose. We concluded from this experiment that fructose has tendency to be more effective in blood glucose regulation than sucrose, and moreover, that smaller amount of fructose is preferred to larger amount. Specifically, our experiments indicated that the fructose level of 0.05 g/kg body weight as dietary supplement was the most effective amount for blood glucose regulation from the pool of 0.05 g/kg, 0.1 g/kg and 0.4 g/kg body weights. Therefore, our results suggest the use of fructose as the substitute sweetener for sucrose, which may be beneficial for blood glucose regulation.

• 한국환경생태학회:학술대회논문집
• /
• 한국환경생태학회 2005년도 임시총회 및 학술논문발표회
• /
• pp.118-123
• /
• 2005

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.225.1-225
• /
• 2003