• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.878-884
• /
• 2010

Ozone sensitivity of physiological indicators and the difference of ozone tolerance on 4 families of Quercus aliena seedlings were investigated on the basis of the standardized physiological indicators. Photosynthetic parameters, photosynthetic pigment and malondialdehyde (MDA) content, and antioxidative enzyme activities were measured or analyzed from the leaves of Q. aliena seedlings at the end of ozone fumigation, and ozone tolerance indices among 4 families were calculated with the standardized physiological parameters. After ozone treatment, the reduction of carboxylation efficiency was observed in the leaves of four families, and their reduction were ranged from -24.1% to -56.9% of control seedlings. Photosynthetic pigment content differed significantly among 4 families and treatments. The reduction of total chlorophyll content showed the highest in family SU4 (-40.6%) and the lowest family US2 (-18.8%). Ascorbate-peroxidase (APX) activity showed significant difference among families and treatments, and increased as compared with control in three families, except for family US2. On the basis of the physiological indices, ozone tolerance of four families was ranked in the order of US1 > SU4 > US2 > SU1. In conclusion, photosynthetic parameters, pigment content and APX activity were recommended as appropriate indicators to assess the tolerance against ozone stress of Q. aliena.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1192-1198
• /
• 2013

To improve yeast strains for bioethanol production, yeasts with ethanol tolerance, thermotolerance, and ${\beta}$-1,3-glucanase activity were bred using yeast genome shuffling. Saccharomyces cerevisiae $BY4742{\Delta}exg1$/pAInu-exgA, which has extracellular ${\beta}$-1,3-glucanase activity, and the Aspergillus oryzae and S. cerevisiae YKY020 strains, which exhibit ethanol tolerance and thermotolerance, were fused by yeast protoplast fusion. Following cell fusion, four candidate cells (No. 3, 9, 11, and 12 strains) showing thermotolerance at $40^{\circ}C$ were selected, and their ethanol tolerance (7% ethanol concentration) and ${\beta}$-1,3-glucanase activity were subsequently analyzed. All the phenotypes of the two parent cells were simultaneously expressed in one (No. 11) of the four candidate cells, and this strain was called BYK-F11. The BYK-F11 fused cell showed enhanced cell growth, ethanol tolerance, ${\beta}$-1,3-glucanase activity, and ethanol productivity compared with the $BY4742{\Delta}exg1$/pAInu-exgA and YKY020 strains. The results prove that a new yeast strain with different characters and the same mating type can be easily bred by protoplast fusion of yeasts.

• Journal of Korean Academy of Nursing
• /
• v.28 no.1
• /
• pp.70-80
• /
• 1998

This study is designed to contribute to the nursing intervention of adolescent domestic violence victims by describing specifically what they go through and on this basis work out a grounded theory on the adolescent's experience in domestic violence. The data were analyzed in the framework of grounded theory as mapped out by Strauss & Corbin(1990). The major findings of this research are as follows : The core category was found to be the the adaptation of "Joyudeum" or “Straight jacketing”. The sub-categories identified in the process of grounded data analysis were 'menacing', 'being harassed', 'being pressed', 'being attacked', 'being strapped', 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard', 'endurance', 'regulation', 'seriousness'. 'repitition'. 'being helpful', 'dependence', 'thinking oriented', 'blowing off', 'going astray', 'self-deprecating', 'shaking off', 'covering up', 'governing', 'being devoted', 'performing', 'being transformed'. 'bolting', 'being shaken', 'withdrawing', 'disliking', 'bitterness'. These categories were again grouped into 13 categories including 'threatening'. 'straight jacketing', 'tolerance', 'violence', 'supporter', 'supporting type', 'thinking oriented'. 'impulsive response', 'self-controlled', 'response', 'self-reliance', 'wandering', 'withdrawal' and pain'. Of these the five sub-categories 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard' were grouped into a core category "straight jacketing". Those adolescents brought up in a violent family go through three stages of the adaptation of "straight Jacketing". that is, generation, response and adaptation. The following four theses were confirmed on the basis of repetitive relations : 1) If a subject's tolerance is strong, the episodes of the violence are frequent and serious, with the resulting straight jacketing being stronger but the subject's supporter is highly mature, the supporting type is concrete and the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is self-reliance with part of it resulted in withdrawal and pain. 2) If a subject's tolerance is weak, the episodes of the violence are frequent but not serious, with the resulting straight jacketing being weaker but the subject's supporter is immature, the supporting type is superficial and the thinking oriented is extemporary, the responses to the straight jacketing result in an impulsion whose consequence is wandering with part of it resulted in withdrawal and pain. 3) If a subject's tolerance is weak, the episodes of the violence are frequent and serious, the straight jacketing is strong, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in an impulsion whose consequence is withdrawal and pain with part of it resulted in wandering. 4) If a subject's tolerance is strong and the episodes of the violence are infrequent and not serious, the straight jacketing is weak, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is withdrawal and pain with part of it resulted in self-reliance.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.468-479
• /
• 2020

The proposed AI processor architecture has high throughput for accelerating the neural network and reduces the external memory bandwidth required for processing the neural network. For achieving high throughput, the proposed super thread core (STC) includes 128 × 128 nano cores operating at the clock frequency of 1.2 GHz. The function-safe architecture is proposed for a fault-tolerance system such as an electronics system for autonomous cars. The general-purpose processor (GPP) core is integrated with STC for controlling the STC and processing the AI algorithm. It has a self-recovering cache and dynamic lockstep function. The function-safe design has proved the fault performance has ASIL D of ISO26262 standard fault tolerance levels. Therefore, the entire AI processor is fabricated via the 28-nm CMOS process as a prototype chip. Its peak computing performance is 40 TFLOPS at 1.2 GHz with the supply voltage of 1.1 V. The measured energy efficiency is 1.3 TOPS/W. A GPP for control with a function-safe design can have ISO26262 ASIL-D with the single-point fault-tolerance rate of 99.64%.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.2
• /
• pp.135-140
• /
• 2016

Corrective controllers enable fault diagnosis and tolerance for various faults in asynchronous sequential circuits without resort to redesign. In this paper, we propose a static corrective controller in order to decrease the size of the controller. Compared with dynamic controllers, static controllers can be made using only combinational circuits, as they need no inner states. We address the existence condition and design procedures for static corrective controllers that overcome state transition faults. To show the validity and advantage, the proposed controller is applied to an SEU error counter implemented on FPGA.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.109-119
• /
• 2016

When manufactured parts undergo large deformations during the manufacturing process, the global specifications of a part based on the concept of tolerance zone defined in the ISO 1101 standard [1] enable one to control the part's global defects. However, the extent of this tolerance zone is too large when the objective is to minimize local defects, such as hollows and bumps. Therefore, it is necessary to address local defects and global defects separately. This paper refers to the ISO 10579 standard [2] for flexible parts, which enables us to define a stressed state in order to measure the part by straightening it to simulate its position in the mechanism. The originality of this approach is that the straightening operation is performed numerically by calculating the displacement of a cloud of points. The results lead to a quantification of the global defects through various simple models and enable us to extract local defects. The outcome is an acceptable tolerance solution. The procedure is first developed for the simple example of a steel bar with a rectangular cross section, then applied to an industrial case involving a complex 3D surface of a turbine blade. The specification is described through ISO standards both in the free state and in the straightened state.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.982-989
• /
• 2009

Parallel Kinematic Mechanism (PKM) is a device to perform the various motion in three-dimensional space and it calls for six degree of freedom. For example, Parallel Kinematic Mechanism is applied to machine tools, medical equipments, MEMS, virtual reality devices and flight motion simulators. Recently, many companies have tried to develop new Parallel Kinematic Mechanism in order to improve the cycle time and the precisional tolerance. Parallel Kinematic Mechanism uses general universal joint and spherical joint, but such joints have accumulated tolerance problems. Therefore, it causes position control problem and dramatically life time reduction. This paper focused on the rolling element to improve sliding precision in new sliding ball joint development. Before the final design and production, it was confirmed that new sliding ball joint held a higher load and a good geometrical structure. FEM analysis showed a favorable agreement with tensile and compressive testing results by universal testing machine. In conclusions, a new sliding ball joint has been developed to solve a problem of accumulated tolerance and verified using tensile and compressive testing as well as FEM analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.232-239
• /
• 2008

The position sensors used in a magnetic bearing system are desirable to provide some degree of fault-tolerance as the rotor position is necessary for the feedback control to overcome the open-loop instability. In this paper, we propose an inductive position sensor that can cope with a partial fault in the sensor. The sensor has multiple poles which can be combined to sense the in-plane motion of the rotor. When a high-frequency voltage signal drives each pole of the sensor, the resulting current in the sensor coil contains information regarding the rotor position. The signal processing circuit of the sensor extracts this position information. In this paper, we used the magnetic circuit model of the sensor that shows the analytical relationship between the sensor output and the rotor motion. The multi-polar structure of the sensor makes it possible to introduce redundancy which can be exploited for fault-tolerant operation. The proposed sensor is applied to a magnetically levitated turbo-molecular vacuum pump. Experimental results validate the fault-tolerance algorithm.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.38-44
• /
• 2009

Two low temperature induced genes designated as SLTI66 and SLTI629 encoding KS-type dehydrin were heterologously expressed in E coli and A. thaliana. E coli cells expressing SLTI66 and SLTI629 protein grew better with iron stress compared to the control cells. Ectopic expression of SLTI629 conferred tolerance to iron stress in Arabidopsis but SLTI66 did not. Arabidopsis plants expressing SLTI66 showed enhanced tolerance to freezing and drought stress compared to those of wild type and SLTI629 lines. We propose that SLTI66 and SLTI629 play a different role as a protector against osmotic and metal stresses.

• Plant Biotechnology Reports
• /
• v.4 no.1
• /
• pp.75-83
• /
• 2010

Glycine betaine has been reported as an osmoprotectant compound conferring tolerance to salinity and osmotic stresses in plants. We previously found that the expression of betaine aldehyde dehydrogenase 1 gene (OsBADH1), encoding a key enzyme for glycine betaine biosynthesis pathway, showed close correlation with salt tolerance of rice. In this study, the expression of the OsBADH1 gene in transgenic tobacco was investigated in response to salt stress using a transgenic approach. Transgenic tobacco plants expressing the OsBADH1 gene were generated under the control of a promoter from the maize ubiquitin gene. Three homozygous lines of $T_2$ progenies with single transgene insert were chosen for gene expression analysis. RT-PCR and western blot analysis results indicated that the OsBADH1 gene was effectively expressed in transgenic tobacco leading to the accumulation of glycine betaine. Transgenic lines demonstrated normal seed germination and morphology, and normal growth rates of seedlings under salt stress conditions. These results suggest that the OsBADH1 gene could be an excellent candidate for producing plants with osmotic stress tolerance.