• 자동차안전학회지
• /
• 제6권2호
• /
• pp.43-48
• /
• 2014

The flexible pedestrian legform impactor(Flex-PLI) consisting of a flexible femur and tibia will be tested for pedestrian protection by global technical regulation(GTR) within the next couple of years as a replacement for the existing transport research laboratory(TRL) legform impactor. In this study, a computer aided engineering(CAE) model was used to perform the effect analysis of each injury with regard to the changes in tolerance factors with the baseline results without tolerance. The tolerance factors were the height of impactor from ground reference line, initial velocity of impactor and rotation of impactor.

• 한국초등과학교육학회지:초등과학교육
• /
• 제36권4호
• /
• pp.439-446
• /
• 2017

The purpose of this study was to compare Grit, failure tolerance and psychological well-being between elementary science gifted and general students. The subjects of this study were 48 science gifted students and 70 general students in the 5th and 6th grade of elementary school in Gyeonggi province. The results of this study were as follows: First, Grit, failure tolerance and psychological well-being of science gifted students were higher than those of the general students, there was a statistically significant difference. Second, science gifted students showed higher correlation between grit and failure tolerance, grit and psychological well-being than general students. Grit of science gifted students had a positive correlation with all sub-factors of academic failure tolerance and psychological well-being. In general students, there was a positive correlation with all sub-factors of Grit, academic failure tolerance, and psychological well-being except for the emotion sub-factor of academic failure tolerance. Thirdly, as a result of the regression analysis on the elements of failure tolerance affecting the Grit, science gifted students showed emotional factor but general students had behavioral factors. Also, as a sub-factor of psychological well-being on Grit, both science gifted and general students showed autonomy.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.306-313
• /
• 2011

항공기 부품에 대한 손상허용해석은 구조적 안전성 및 신뢰성 보장을 위해 면밀히 평가되어야한다. 손상허용기법은 항공기 주구조의 피로 설계기법으로 초기균열의 존재를 고려하여 피로수명을 산정한다. 따라서 손상허용해석에서는 피로 균열성장 수명의 계산이 요구되며, 이를 바탕으로 부품의 점검시간 및 교체주기를 결정한다. 본 논문에서는 형상이 복잡한 터빈 휠에 대하여 손상허용해석을 수행하였다. 형상이 복잡한 구조의 균열성장수명평가 시에는 주요 변수인 응력확대계수의 식을 알기 어려워, 이를 유한요소해석으로 계산하므로 많은 시간이 요구된다. 이러한 문제를 해결하고자 특정 균열길이에 대한 응력확대계수를 유한요소해석으로 계산하고, 생성된 데이터의 회귀분석을 통해 응력확대계수의 근사모델을 생성하였다. 균열성장 수명은 근사모델의 적분으로 계산하였으며, 근사모델을 사용하여 균열성장 수명평가와 손상허용해석의 효율을 높일 수 있었다.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.22-27
• /
• 2019

In this paper, the vibration load and analysis results for automotive battery supporter were performed to provide efficient vibration tolerance performance prediction methods for single-product vibration tolerance testing, and the major influencing factors and considerations for setting up single-unit vibration tolerance tests were reviewed. A common applicable standard load was applied to efficiently predict the performance of single-unit vibrations through the frequency response analysis technique. The results similar to test results can be predicted by checking vulnerable parts of the vehicle components for vibration loads and applying scale factor to standard loads. In addition, it was confirmed that the test conditions with a frequency generating the same durability severity as the endurance test are needed for accurate prediction of the durability of the single-unit vibration tolerance test conditions, and the acceleration and frequency with the conditions that there is no significant nonlinear phenomena in the vibration system are established during the single-unit vibration tolerance test conditions.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.126-136
• /
• 2021

During operation of nuclear power plants, the fatigue assessment should be conducted repeatedly, considering changes of operating environments. For the case that cumulative usage factors (CUFs) may exceed the acceptance limit, flaw tolerance evaluation can be an alternative method to meet the regulatory requirements. In this respect, this paper analyzes the effects of the input variables for flaw tolerance evaluation based on ASME BPVC Section XI Appendix L. The reference analysis is performed for the example problem in NUREG/CR-6934. Then effects of the crack orientation, stress intensity factor solutions, thermal stress profiles, fatigue stress decomposition and fatigue crack growth curves are considered for the sensitivity analysis. The results show that the stress analysis considering the actual environment plays a crucial role in flaw tolerance evaluation.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.91-104
• /
• 2005

Tolerance analysis plays an important role in design and manufacturing stages for reducing manufacturing cost by improving producibility. In most production processes encountered in practice, a process mean may shift or drift in the long run although process is in control. This study discusses the feasibility of three most common inflation factors(Bender, Gilson and Six Sigma) as a correction to Root Sum of Squares(RSS) method to compensate heuristically for a shift of process mean and nonnormal component distributions from simulation experiments and proposes the guidelines for choosing the inflation factor.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.75-83
• /
• 2010

Every mechanical part for mass production has dimensions with tolerances in engineering drawing. Tolerance is given to guarantee assemble parts together satisfying functional requirements and dimensional constraints. Tolerance is essential factor for standardization of parts or assembly and has huge influence on manufacturing cost. It will be desirable to have tolerances as broad as possible for minimizing manufacturing cost. This paper describes tolerance analysis of u-joint assembly that is a part of automobile steering system. Within the range of tolerances of parts, accumulated effect is estimated by arithmetic calculation, probability theory and Monte carlo simulation. Each result is compared to investigate the method for increasing productivity.

• 한국IT서비스학회지
• /
• 제6권3호
• /
• pp.163-177
• /
• 2007

This research is the concept of a game addiction absorbed in the game based on the review and analysis of factors that affect the characteristics of game addiction, it is appropriate to extract the purpose of factors. Game addiction factor is composed of a total of 32 questions, and a total of 356 people, to collect data through surveys. Factor analysis of the collected data to the target as a result of physical and mental problems, loss of control, tolerance, and avoidance of real world consists of three sub-factors. Factors that affect flow of tolerance and loss of control, and avoid the real world, including two sub-factors that could determine. Diagnostic game addiction factor in the reliability coefficients (Cronbach alpha) is a robust .966 aspects in the event. The game addiction scale score of 90-game addiction by category 'regular user', 90 points and 114 between the terms 'potentially dangerous user' and 13 percent of the overall. Finally, more than 115 points in the 'high-risk user' has been classified as 5% of the overall distribution of the notice that. Such factors extract game is a game addict, addicted users of the game and tend to properly evaluate and navigate game addiction-related problems early in the game addiction and found it could be used properly.

• Journal of Plant Biotechnology
• /
• 제38권1호
• /
• pp.94-104
• /
• 2011

Salt stress is a major environmental factor influencing plant growth and development. To identify salt tolerance determinants, we systematically screened salt sensitive rice mutants by use of the Activator/Dissociation (Ac/Ds) transposon tagging system. In this study, we focused on the salt sensitive mutant line, designated SSM-1. A gene encoding a NAC transcription factor homologue was disrupted by the insertion of a Ds transposon into SSM-1 line. The OsNAC075 gene (EU541472) has 7 exons and encodes a protein (486-aa) containing the NAC domain in its N-terminal region. Sequence comparison showed that the OsNAC075 protein had a strikingly conserved region at the N-terminus, which is considered as the characteristic of the NAC protein family. OsNAC075 protein was orthologous to Arabidopsis thaliana ANAC075. Phylogenetic analysis confirmed OsNAC075 belonged to the OsNAC3 subfamily, which plays an important role in response to stress stimuli. RT-PCR analysis showed that the expression of OsNAC075 gene was rapidly and strongly induced by stresses such as NaCl, ABA and low temperature ($4^{\circ}C$). Our data suggest that OsNAC075 holds promising utility in improving salt tolerance in rice.

• 대한가정학회지
• /
• 제45권7호
• /
• pp.131-140
• /
• 2007

The purpose of this study was to examine the influence of aesthetic surgery attitude, self-esteem and body image on clothing behavior. Subjects were 356 female college students in Seoul. The data obtained were analyzed by reliability analysis, factor analysis, correlation analysis, stepwise multiple regression analysis and t-test. The major results of this study were as follows: First, five factors of aesthetic surgery attitude were identified: risk tolerance of aesthetic surgery, need of aesthetic surgery, image improvement via aesthetic surgery, keeping the secret of aesthetic surgery, and others' expectation of aesthetic surgery. Second, significant relationships were found between body image and clothing behavior, and self-esteem and body-enhancement of clothing. Also, risk tolerance of aesthetic surgery, need of aesthetic surgery, and image improvement via aesthetic surgery had a significant correlation with clothing behavior. Third, the most important variable which affected the aesthetics and body-enhancement of clothing was body image. The entertainer imitation behavior of clothing was influenced by need of aesthetic surgery, body image, keeping the secret of aesthetic surgery, risk tolerance of aesthetic surgery, and image improvement via aesthetic surgery. Preference for luxury goods of clothing was influenced by need of aesthetic surgery and body image. Body-enhancement of clothing was influenced by body image, image improvement via aesthetic surgery, and self-esteem.