• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.376-379
• /
• 2001

This paper describes the design and fabrication process of super water-saving toilet bowl system by the theory of inventive problem solving (TRIZ). The physical contradiction in TRIZ is defined to obtain the conceptual design for saving water in toilet bowl system with preventing the bad smell from septic tank. The super water-saving toilet bowl system is obtained by using the separation principle in time for resolving the physical contradiction. The consumption of water in the prototype system fabricated, is estimated about $3{\ell}$ comparing with $13{\ell}$ of that in conventional toilet bowl system. The noise from water in the prototype toilet bowl system is decreased by 1/3 of that in conventional toilet bowl system.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.193-197
• /
• 2001

This paper describes the design process of super water-saving toilet bowl system by the theory of inventive problem solving (TRIZ). The physical contradiction in TRIZ is defined far saving water in toilet bowl system with preventing the bad smell from septic tank. The super water-saving toilet bowl system is obtained by using the separation principle in time far resolving the physical contradiction. The real system is made using CAD tools. The consumption of water in the system implemented, is estimated about 3 ιcomparing with 13 ι of that in conventional toilet bowl system.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.338-341
• /
• 2011

Water usage for cleaning the toilet bowl accounts for 27% of the total water usage. Water-saving valve that can select the amount of water for cleaning toilet bowl can be reduced expenditure. After installing water-saving valve, analysed the economic effects. Water-saving valves compared with flush valves, and researched the amount of water usage. Then analyzed fort he economic effects. Water-saving valve was used 5.6 ${\ell}/time$ for cleaning toilet bowl. In contrast, flush valve was consumed 8.4 ${\ell}/time$. Water-saving valve's water-saving rate was 33.3%. The initial payback period for Water-saving valve was 459.5 days. By a small investment in water saving valve, the economic benefits can be obtained.

• 설비공학논문집
• /
• 제23권10호
• /
• pp.656-661
• /
• 2011

The amount of water resources that can be used tend to be decreased gradually. In contrast, the rapidly increasing water consumption is a problem that need to be addressed. Renovation and equipment replacement to improve energy efficiency and to reduce expenditure for building usage is required. But the excessive initial investment cost and the prolonged of pay back period may be uneconomical choice. Water usage for cleaning the toilet bowl accounts for 27%of the total water usage. Water-saving valve that can select the amount of water for cleaning toilet bowl can be reduced expenditure. After installing water-saving valve, analysed the economic effects. Water-saving valves compared with flush valves, and researched the amount of water usage. Then analyzed for the economic effects. Water-saving valve was used 5.6 ${\ell}$/time for cleaning toilet bowl. In contrast, flush valve was consumed 8.4 ${\ell}$/time. Water-saving valve's water-saving rate was 33.3%. The initial payback period for Water-saving valve was 459.5 days. By a small investment in water saving valve, the economic benefits can be obtained.

• 웰빙융합연구
• /
• 제5권3호
• /
• pp.1-5
• /
• 2022

Purpose: The purpose of this study is to investigate whether wetland has antimicrobial activity on pathogenic bacteria in the toilet bowl. Research design, data and methodology: Air-dried mud obtained from "Jilmoe Bog" wetland was packed and dissolved in the autoclaved saline. Antimicrobial susceptibility was assessed against three Gram-negative bacteria using disk diffusion method and broth dilution method. Identification of specific bacterium presented in wetland supernatant was performed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Results: Incubation of three Gram-negative bacteria with wetland supernatant inhibited bacterial growth of the bacteria, otherwise increased prevalence of specific bacterium. It was confirmed that Pseudomonas putida was presented in wetland supernatant. Conclusions: The results presented in this study might provide the possibility to utilize wetland supernatant as a bioremediation of toilet bowl bacteria.

• 월간포장계
• /
• 통권233호
• /
• pp.82-87
• /
• 2012

• 월간포장계
• /
• 통권244호
• /
• pp.99-105
• /
• 2013

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.75-75
• /
• 2010

배변 후 toilet flushing 시 다량의 세균을 포함한 물방울들이 화장실 곳곳으로 퍼지는 현상이 있다. 이러한 현상을 방지하기 위해 변기 뚜껑에 자기 세정 효과를 갖는 초발수 표면을 위해 플라즈마를 이용한 표면 처리가 시도되고 있으며, 이 연구의 일환으로 flushing시의 변기내의 유동 분석을 초고속 카메라를 이용하여 수행하였다. Toilet flushing 시 물 튀김 현상은 육안으로는 잘 관찰하기 어렵지만 최고 1000 frame/sec의 속도를 갖는 CCD camera를 이용하여 정량적으로 물 튀김에 의한 오염 가능성을 촬영 분석하였다, 두 번째로 소변 시의 변기 표면에서의 튀김현상을 분석하기 위하여 소변의 발사각도 및 속도를 가장 실제와 유사한 조건으로 설정하고 이를 상용 전산 유체 역학 소프트웨어인 CFD- ACE+의 자유 표면 계산 기능과 두 가지 유체(액체 및 기체)의 혼합 계산 모델을 사용한 계산 결과와 비교 하였다. 그 결과 변기 표면의 표면장력을 아주 작게 설정한 경우(작은 접촉각, 친수성)에는 중력의 영향을 고려하였음에도 불구하고 소변이 변기에 충돌 후 상부로 상당부분 튀어 올라가는 결과를 얻었다. 여러 가지 각도와 발사 속도, 실제의 인체와 유사한 발사 부위의 형상 변화로 인한 유체 표면의 난류 발생과 이에 따른 변기 표면 충돌 현상 변화 등을 수치적으로 고찰하였다. 한 예로 5.6 mm 직경의 노즐에서 소변이 나오는 경우를 발사 속도 3 m/s, 각도 $10^{\circ}$로 주고 중력을 고려하여 10초 동안을 계산하면, 방뇨 시 toilet bowl 내부에서의 물의 유동과 toilet 표면을 맞고 튀기는 현상을 그림 1과 같이 볼 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.211-212
• /
• 2019

It is possible to realize the concept of long-life housing by utilizing the wall piping infill system. However, when using the wall piping infill system, there is no detailed standard in Korea. Problems may occur in actual use. In this study, we use the results obtained from the performance test method as a basic data. Since the load resistance test of the toilet is not available in Korea, GB 6952 (Sanitary wares) of China is applied. According to the experiment of load resistance of the toilet in this study, the strain recovery ability was good. However, it is not possible to exclude the possibility of permanent deformation of the toilet seat due to long - term repeated loading. Therefore, it is necessary to consider the stiffness enhancement of the wall (steel frame) to the fixing part when installing the toilet in the wall pipe infill system.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.114-120
• /
• 2017

Water supply and drainage noise in the bathroom is recognized as one of the main noises, along with the floor-impact sounds, in apartment housings. Recently, to solve such noise issues, a new construction method of installing the piping on the slab has been adopted. rather than the traditional method of penetrating the piping through the slab between the upper and the lower bathrooms. However, this new method has limitations due to high costs and constructional difficulties. Therefore, this study was conducted to develop noise reducing piping and elbows, where the noise can be reduced simply by replacing the existing pipings. The noise level was measured in a laboratory by installing the horizontal drainage piping (three types) and the elbows (three types) developed in this study. The results showed that the horizontal pipings reduced the noise level in LAmax by 0.3 dB(A)~1.0 dB(A), as compared to the existing pipings (VG2), indicating an insignificant noise reduction effect. The elbow reduced the noise level in LAmax by 5.5 dB(A) ~ 11.5 dB(A), as compared to the existing elbow (DRF elbow), with the result of reducing the noise level at all frequencies evenly. Consequently, it was shown that using the elbows is more effective in reducing the water-drainage noise from the toilet than using the horizontal pipings.