• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권2호
• /
• pp.197-201
• /
• 2003

The recombinant plasmids harboring a heterologous gene coding mouse endostatin were transfected and expressed stably in Trichoplusia ni Tn 5B1-4 cells and Bombyx mori BmN cells, respectively. Recombinant endostatin expressed in the stably transformed Tn 5B1-4 and BmN cells was secreted into the medium. BmN cells are relatively lower in maximum cell growth and recombinant endostatin production than Tn 5B 1-4 cells. Recombinant endostatin was also purified to homogeneity using a simple one-step ${Ni^2+}$ affinity fractionation method. Purified recombinant endostatin inhibited endothelial cell proliferation in a dose-dependent manner. The concentration at half-maximum inhibition $({ED_50})$ for recombinant endostatin was approximately 0.35 ${\mu}g$/ml.

• KSBB Journal
• /
• 제13권2호
• /
• pp.181-186
• /
• 1998

부착의존성 세포주인 Trichoplusia ni 의 유래의 BTI-TN5B1-4 (TN5) 곤충세포주를 이용하여 인간 혈소판생성축진인자인 재조합 인간 트롬보포이에틴(rhTPO)의 배양조건 최적화 연구를 수행하였다. 배양배지, 세포감염에 투입되는 재조합 베큘로바이러스와 숙주세포의 비율(MOI),세포감염시 세포밀도, 배지 회수시간 및 배양방법 등이 rhTPO 의 생산에 미치는 효과를 연구하여 60 mm dish로 정체 배양시 10 MOl 이상,$2\times10^6$ cells 의 세포밀도,바이러스 감염 후72 시간에서 rhTP0 의 최대 발현양 (약 12 mg/L)을 나타내었다. 배양 배지로서는 EXCELL FIVE 배지가 SF900II나Insect serum free media-1 Figure 5. Effect of growth phases on rhTPO production. TN5 cells were grown as suspension culture in 1 L spinner flask with 200 mL of SF900II serum free medium at 80 rpm. The cells were infected with AcBac404-2 at MOl of 1. Culture medium was collected at given time intervals and the expression level of rhTPO was analyzed by ELISA (A) or immunoblot analysis (B). Lanes 1 and 7; cell density of $0.6\times10^6$ cells/mL, lanes 2 and 8; cell density of $1.6\times10^6$ cells/mL, lanes 3 and 9; cell density of $2.0\times10^6$ cells/mL, lanes 4 and 10; cell density of $3.0\times10^6$ cells/mL, lane M; prestained molecular weight marker (Bio-Rad). Lanes 1, 2, 3, and 4; culture medium was collected at 48 hpi and lanes 7, 8, 9, and 10; culture medium was collected at 72 hpi. Figure 6. Effect of culture media on rhTPO production. TN5 cells grown with different culture media were infected with AcBac-404-2 at 10 MOL 10$\mu$L of culture medium was run on SDS-PAGE and Immunoblot analysis was performed. Lane ];TN5 cells cultured with SF900II serum free media(Gibco),and lane 3; TN5 cells cultured with EXPRESS FIVE serum free media (Gibco) 에 비해 더 증가된 발현양을 나타내었다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다.

• BMB Reports
• /
• 제31권5호
• /
• pp.453-458
• /
• 1998

Human thrombopoietin (hTPO) was expressed to high levels in insect cells using the baculovirus expression system. Full-length hTPO cDNA containing a native signal peptide sequence was amplified by PCR from a human fetal liver cDNA library and cloned into the Autographa californica nuclear polyhedrosis virus (AcNPV) expression vector. Immunoblot analysis with antiserum against hTPO indicated that an approximately 55 kDa protein was produced in recombinant AcNPV infected insect cells. Recombinant hTPO was produced 4-fold higher in Trichoplusia ni (Tn5) cells than in Spodoptera frugiperda (Sf9) cells. with most of the hTPO produced in Tn5 cells secreted into the culture medium. Addition of tunicamycin in the culture medium resulted in the reduction of the size of hTPO to 35-38 kDa, and most of the protein remained within the cell. These results suggest that N-glycosylation of hTPO is required for the secretion of the protein into the culture medium in insect cells. hTPO produced in insect cells induced proliferation and maturation of megakaryocyte progenitors, indicating that it is in a biologically active form.

• Clinical and Experimental Reproductive Medicine
• /
• 제34권4호
• /
• pp.239-252
• /
• 2007

목 적: 사람의 HAD와 HUC를 심근세포로 분화 유도하고자 하였다. 연구방법: 사람의 HAD와 HUC를 분리하여 5-azacytidine을 24시간 처리하고 여러 가지 BMP와 FGF을 첨가하여 배양하였다. 또한 HUC은 BMP와 FGF와 함께 activin A 또는 TGF-$\beta$1 또는 Wnt inhibitor를 첨가하여 배양한 후 심근세포 특이 유전자의 발현을 조사하였다. 결 과: HAD를 5-azacytidine 처리하고 기본배양액에서 4주 동안 배양하였을 때 TnT 유전자가 새로이 발현하였으며 Cmlc1과 kv4.3의 발현 양이 증가하였다. 5-azacytidine 처리 후에 BMP-4와 함께 FGF-4 (B4/F4) 또는 FGF-8 (B4/F8)을 첨가하여 배양하였을 때는 $\beta$-MHC 유전자 발현이 새로이 유도되었으며, Cmlc1, TnT, TnI 그리고 Kv4.3 유전자 발현 양이 더 많이 증가하였다. HUC은 5-azacytidine 및 BMP와 FGF 처리에 의해 유전자 발현 변화가 없었다. 그러나 BMP와 FGF와 함께 activin A 또는 TGF-$\beta$1을 첨가하여 배양하였을 때, BMP-2와 FGF-8 (B2/F8)을 첨가하여 배양한 세포에서 $\beta$-MHC 발현이 새로이 유도되었으며 $\alpha$-CA, TnT 그리고 Kv4.3 유전자의 발현이 증가하였다. 또한 BMP와 FGF와 함께 Wnt inhibitor를 처리하여 1주 동안 배양하였을 때 Cinlc1 유전자 발현이 새로이 유도되었으며 $\alpah$-CA, TnT, TnI 그리고 Kv4.3의 발현이 증가되었다. 결 론: HAD는 BMP와 FGF 처리에 의해 심근세포 특이 유전자의 발현증가를 유도할 수 있었으며 HUC는 BMP와 FGF와 함께 activin A 또는 TGF-$\beta$1 또는 Wnt inhibitor를 처리함으로써 심근세포 특이 유전자의 발현증가를 유도할 수 있었다. 따라서 HAD와 HUC는 심장질환 치료를 목적으로 하는 세포 치료에 이용될 수 있을 것으로 사료된다.

• 미생물학회지
• /
• 제27권4호
• /
• pp.323-333
• /
• 1989

Transposon Tn5의 단백질 합성을 E. coli 내에서 증폭 합성시키기 위하여 Bacteriophage의 Pt 촉진유전자가 Tn5의 두 개 module인 IS50L 과 IS50R을 전사시킬 수 있도록 plasmid를 재구성하였다. P1 촉진유전자로부터의 전사를 탈억제시켰을 경우, IS50R으로부터 합성되는 두 개의 단백질은 모두 그 세포내 축적량이 SDS-polyacrylamid gel에서 확인 될 정도로 증폭합성되었으나 IS501L의 두 개 단백질들은 동일 gel 상에서 확인되지 않았다. Minicell system에서 합성양상과 각 단백질들의 안정성을 조사한 결과, IS50R 단백질은 모두 안정하게 유지되었으나 IS501, 단백질은 모두 불안정하여 생분해 되어 진다는 사실을 밝혔다. 이러한 Is50L 단백질의 불안정성은 IS50L이 transposition에 있어서 불활성을 나타내는 원인이라 추정된다. 또한 IS50L고 IS50R의 단백질은 모두 동일한 open reading frame에 의하여 합성되어짐을 tryptic peptide 양상을 통하여 알 수 있었다.

• 한국식물병리학회지
• /
• 제10권1호
• /
• pp.39-46
• /
• 1994

Pseudomonas fluorescens Biovar III strains S-2 antagonistic to Rhizoctonia solani was subjected to Tn5 mutagenesis by the transposon vector pGS9. Ampicillin and kanamycin resistant (Ampr, Kmr) transconjugants were recovered at a frequency of 1.3$\times$10-7 per initial recipient cell, when recipient cells were washed twice in TE buffer before conjugation. Of the ca. 3000 transconjugants, a frequency of noninhibitory (Inh-), nonfluorescent (Flu-) and auxotorphic (Pro-) mutants were 0.27%, 0.47% and 0.40%, respectively. In these mutants, all Inh- mutants showed the same colony morphology as wild type, whereas all Flu- and Pro- mutants inhibited the growth of R. solani. These mutants were also susceptible to chloramphenicol, indicating only the Tn5 element, except for parts of pGS9, was integrated into the recipient genome. In a Southern blot analysis, the Tn5 element inserted into one site on the chromosome for each of the chosen mutants. However, Tn5 insertion sites of Inh-, and Pro- mutants were differed in each other. These indicate that the genes essential for R. solani inhibition, fluorescent production and auxotrophic are chromosomally located, but not linked to each other.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.338-338
• /
• 2009

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, noncontact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. We investigated the high pretilt angle effects on electro-optical properties of ion beam (IB)-irradiated liquid crystal cells. on a blended polymer surface. High pretilt angle of liquid crystals IB-irradiated on a blended polymer surface including such as 5% and 10% of homeotropic polymer contents can' be achieved. The threshold voltages of IB-irradiated twisted nematic (TN) cells on a blended polymer surface decrease with increasing the pretilt angle. Also, the rising time of IB-irradiated TN cells decreases with increasing the pretilt angle. However the decay time of IB-irradiated TN cells increases with increasing the pretilt angle. Consequently, the electro-optical properties of IB-irradiated TN cells depend strongly on the pretilt angle in a blended polymer surface.

• 한국광학회지
• /
• 제21권2호
• /
• pp.69-73
• /
• 2010

본 논문에서는 광학적으로 비등방성인 폴리머를 이용하여 $90^{\circ}$ TN(Twisted Nematic) 액정셀의 응답시간을 향상시키는 방법을 제안하였다. 액정과 비등방성 폴리머를 일정 비율로 혼합하여 TN 액정셀에 주입한 뒤 UV를 조사하여 폴리머 네트워크를 형성시킴으로써 투과율에 영향을 주지 않고 응답시간을 향상시킬 수 있다. 폴리머 네트워크가 형성되지 않은 TN 액정셀의 turn-off 시간이 16 ms인데 반해 제안된 방법에서는 액정과 비등방성 폴리머의 혼합 비율이 3, 5, 10 wt%로 증가할 때 12, 11, 9 ms로 고속 turn-off가 구현될 수 있다. 또한, turn-off 동작 시 TN 액정셀에서 발생하였던 delay time과 backflow가 폴리머 네트워크의 형성에 의해 크게 개선됨을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.289-290
• /
• 2005

We have investigated the electro-optical (EO) performances of the flexible liquid crystal display (LCD) on twisted nematic (TN) mode according to variation of cell gap in comparison with glass LCD. There were four kinds of cells which were having cell gaps of 3$\mu$m, 4$\mu$m and 5$\mu$m, especially the lowest 2$\mu$m on flexible and glass substrates separately. The EO performances of the flexible cells on the rubbed potyimide (PI) were almost the same those of glass cells. The response time of flexible cells was shorter than that of glass cells but the alignment of liquid crystal (LC) of flexible cells was weaker than that of glass cells. The residual DC of flexible cells was on the increase like that of glass cells in compliance with lowering cell gap.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제9권2호
• /
• pp.173-181
• /
• 2004

To delay the onset of apoptosis in the culture, transformed Tn 5B1-4 cells harboring anti-apoptotic genes, bcl-2 and baculovirus p35, have been established and analyzed for their anti-apoptotic ability in suspension culture using spinner flasks. In the suspension culture at agitation speeds of 100 rpm and 200 rpm, the cell growth of cell clone expressing Bcl-2 protein was much higher than other two clones and the maximum cell density of the clone was 6.0 ${\times}$ 10$^{6}$ cells/ml and 6.2 ${\times}$ 10$^{6}$ cells/ml at day three of the incubation. On the other hand, the cell growth of cell clone expressing baculovirus protein P35 was much higher than other two clones in suspension culture at agitation speed of 300 rpm and the maximum cell density of the clone was 6.1 ${\times}$ 10$^{6}$ cells/ml at day three of the incubation. Based on the pattern of genomic DNA laddering and the microscopic observation of apoptotic bodies, the more apoptotic bodies are induced in Tn 5B1-4 control cell clone at higher agitation speed. This result shows that the shear stress can be a main factor in inducing apoptosis in spinner flask culture. At low agitation speed, cell clone expressing Bcl-2 was more effective in delaying the onset of apoptosis than the cell clone expressing P35. On the other hand, at high agitation speed, cell clones expressing baculovirus P35 was more effective in delaying the onset of apoptosis than the cell clone expressing Bcl-2. Therefore, anti-apoptotic genes, bcl-2 and baculovirus p35, can playa distinct role depending on agitation speed in the suspension culture.