• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2011

The objective of this paper is to evaluate the performance of low $CO_2$ asphalt binder properties using LEADCAP$^{(R)}$(Low Energy and Carbon Asphalt Pavement) additive as function of various aging methods such as RTFO(Rolling thin film oven), Ultraviolet(UV) lay. In order to simulate the short-term aging of asphalt binder that occurs during the hot-mixing asphalt process, the Rolling Thin Film Oven(RTFO) was used. Asphalt binder using LEADCAP$^{(R)}$ is prepared by addition of a photoinitiator activated by ultraviolet lay. The mechanical and rheological properties of the asphalt binder were estimated using UTM(Universal Testing Machine) and DSR(Dynamic Shear Rheometer). The test results showed that the asphalt binder using LEADCAP$^{(R)}$ additive was improved the rutting resistance at testing temperature ($70^{\circ}C$) and increased tensile strength at low temperature. Also, Thermal analysis shows that the Melting Point(Tm) of asphalt binder using LEADCAP$^{(R)}$ additive was constant although the asphalt binder was aged by Ultraviolet.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.271-272
• /
• 2012

Bulk Metallic Glasses (BMGs or amorphous alloy) exhibit high strength and good corrosion resistance. Applications of thin films and micro parts of BMGs have been used a lot since its inception in the research of BMGs. However, Application and fabrication of BMGs are limited to make structural materials. Thin films of BMGs which is sputtered on the surface of structural materials by sputtering process is used to improve limits about application of BMGs. In order to investigate the difference of properties between designed alloys and thin films, we identified that thin films deposited on the surface that have the characteristic of the amorphous films and the composition of designed alloys. Zr-Cu (Cu=30, 35, 38, 40, 50 at.%) and Zr-Cu-Al (Al=10 at.% fixed, Cu=26, 30, 34, 38 at.%) alloys were fabricated with Zr (99.7% purity), Cu (99.997% purity), and Al (99.99% purity) as melting 5 times by arc melting method before rods 2mm in diameter was manufactured. In order to analyze GFA (Glass Forming Ability), rods were observed by Optical Microscopy and SEM and $T_g$, $T_x$, ($T_x$ is crystallization temperature and $T_g$ is the glass transition temperature) and Tm were measured by DTA and DSC. Powder was manufactured by Gas Atomizer and target was sintered using powder in large supercooled liquid region ($=T_x-T_g$) by SPS(Spark Plasma Sintering). Amorphous foil was prepared by RSP process with 5 gram alloy button. The composition of the foil and sputtered thin film was analyzed by EDS and EPMA. In the result of DSC curve, binary alloys ($Zr_{62}Cu_{38}$, $Zr_{60}Cu_{40}$, $Zr_{50}Cu_{50}$) and ternary alloys ($Zr_{64}Al_{10}Cu_{26}$, $Zr_{56}Al_{10}Cu_{34}$, $Zr_{52}Al_{10}Cu_{38}$) have $T_g$ except for $Zr_{70}Cu_{30}$ and $Zr_{60}Al_{10}Cu_{30}$. The compositions with $T_g$ made into powders. Figure shows XRD data of thin film showed similar hollow peak.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.290-296
• /
• 2021

The effect of draw ratio (8, 10, 12, 14 times) and additive CaCO₃ content (0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) on the properties of high-performance PE monofilament was investigated in this study. As the draw ratio increased (8-14 times), the melting enthalpy (ΔHf), crystallinity, specific gravity, and tensile strength increased significantly. However, the draw ratio had little effect on the melting temperature (Tm) and crystallization temperature (Tc). The seawater fastness (stain and fade) of the hydrophobic PE monofilament prepared in this study showed an excellent grade of 4-5 in all draw ratios. To investigate the effect of the additive CaCO₃ content on the properties of high-performance PE monofilament, the draw ratio was fixed at 14 times. It was found that the tensile strength of the PE monofilament sample containing 0.5 wt% of CaCO₃ was much greater compared to the sample without CaCO₃, but the elongation of the sample containing 0.5 wt% of CaCO₃ was much less than the sample with 0 wt% CaCO₃. However, in the case of the sample containing more than 0.5 wt% CaCO₃, the tensile strength slightly decreased and the elongation slightly increased as the CaCO₃ content increased. The seawater fastness (stain and fade) of the hydrophobic PE monofilament showed excellent grades of 4-5, regardless of the amount of additives. From the above results, it was found that the maximum draw ratio of 14 times with an additive of 0.5 wt% CaCO₃ are the optimal conditions for manufacturing high-performance marine fusion materials with various fineness (denier) with high strength and low elongation.

• Journal of Plant Biology
• /
• v.39 no.1
• /
• pp.57-61
• /
• 1996

The genome of red pepper was investigated by thermal denaturation, reassociation kinetics and measurement of nuclear volume for its base composition, spectrum of kinetic components and genome size. Base composition was estimated to be 37% (G+C) based on melting temperature. The reassociation of 300 nt fragments analyzed by hydroxyapatite chromatography revealed the presence of three kinetic components differing in fraction of genome, kinetic complexity and number of copies as follows; 4.8% (fast) with $5.6{\times}10^{4}\;bp$ and 10,754, 26% (intermediate) with $1.9{\times}10^{6}\;bp$ and 177, and 65% (slow) with $8.48{\times}10^{8}\;bp$ and 1. These measurements demonstrate that the genome of red pepper has a 1C DNA content of $1.25{\times}10^{9}\;bp$, which is about 33% of $4.05{\times}10^{9}\;bp$ calculated from nuclear volume of $62.4\;\mu\textrm{m}^3/1C$..

• Journal of Pharmacopuncture
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2016

Objectives: This study examined the relative efficacies of a derivative of betulinic acid (dBA) and its poly (lactide-co-glycolide) (PLGA) nano-encapsulated form in A549 lung cancer cells in vivo and in co-mutagen [sodium arsenite (SA) + benzo[a]pyrene (BaP)]-induced lung cancer in mice in vivo. Methods: dBA was loaded with PLGA nanoparticles by using the standard solvent displacement method. The sizes and morphologies of nano-dBA (NdBA) were determined by using transmission electron microscopy (TEM), and their intracellular localization was verified by using confocal microscopy. The binding and interaction of NdBA with calf thymus deoxyribonucleic acid (CT-DNA) as a target were analyzed by using conventional circular dichroism (CD) and melting temperature (Tm) profile data. Apoptotic signalling cascades in vitro and in vivo were studied by using an enzyme-linked immunosorbent assay (ELISA); the ability of NdBA to cross the blood-brain barrier (BBB) was also examined. The stage of cell cycle arrest was confirmed by using a fluorescence-activated cell-sorting (FACS) data analysis. Results: The average size of the nanoparticles was ~ 110 nm. Confocal microscopy images confirmed the presence of NdBA in the cellular cytoplasm. The bio-physical properties of dBA and NdBA ascertained from the CD and the Tm profiles revealed that NdBA had greater interaction with the target DNA than dBA did. Both dBA and NdBA arrested cell proliferation at G0/G1, NdBA showing the greater effect. NdBA also induced a greater degree of cytotoxicity in A549 cells, but it had an insignificant cytotoxic effect in normal L6 cells. The results of flow cytometric, cytogenetial and histopathological studies in mice revealed that NdBA caused less nuclear condensation and DNA damage than dBA did. TEM images showed the presence of NdBA in brain samples of NdBA fed mice, indicating its ability to cross the BBB. Conclusion: Thus, compared to dBA, NdBA appears to have greater chemoprotective potential against lung cancer.

• Korean Journal of Microbiology
• /
• v.43 no.4
• /
• pp.264-272
• /
• 2007

For the detection of human immunodeficiency virus (HIV), ultra-rapid real-time PCR methods were developed. The target DNA sequences were used 495 bp HIV-1-specific env gene (gi_1184090) and 294 bp HIV-2-specific env gene (gi_1332355). Ultra-rapid real-time PCR was peformed by $Genspector^{TM}$ (Samsung, Korea) using microchip-based, $6\;{\mu}l$ of reaction volume with extremely short running time in only 2 steps (denaturation, annealing/extension) in each cycle of PCR. Total reaction for 30 cycled ultra-rapid PCR detection including melting temperature analysis was completed in 7 min and 30 sec. The HIV-1-specific 117 bp-long or HIV-2-spe-cific 119 bp-long PCR products were successfully amplified from the minimum of template, $2.3{\times}10^3$ copies of each euv gene using 30 cycled two-steps ultra-rapid PCR. This kind of ultra-rapid real-time PCR method would be useful not only for the rapid-detection of HIV, but also rapid-detection of other pathogens.

• Korean Journal of Microbiology
• /
• v.43 no.2
• /
• pp.91-99
• /
• 2007

For the detection of Human Immunodeficiency Virus (HIV), multiple and ultra-rapid real-time PCR methods were developed. The target DNA sequences were deduced from HIV-1 specific 495bp partial env gene (gi_1184090) and from HIV-2 specific 294 bp partial env gene (gi_1332355), and were synthesized by using PCR-based gene synthesis on the reason of safety. Ultra-rapid real-time PCR was performed by $Genspector^{TM}$ using microchip-based, $1\;{\mu}l$ of reaction volume with extremely short time in each 3 step in PCR. The detection including DNA-amplification and melting temperature analysis was completed inner 15 minutes. The HIV-1 specific 117 bp-long and HIV-2 specific 119 bp-long PCR products were successfully amplified from minimum of template,2.3 molecules of each env gene. This kind of real-time PCR was designated as ultra-rapid real-time PCR in this study and it could be applied not only an alternative detection method against HIV, but also other pathogens using PCR-based detection.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.203-211
• /
• 2008

Rapid detection-method for Shiga toxin type 1 that was produced from Shiga toxin-producing Escherichia coli (STEC) was developed by two-step ultra-rapid real-time (URRT) PCR. The specific primers were deduced from 80 bp stable region of stx type 1 (stxl) gene among various informations of STEC strains. URRT PCR is a microchip-based real-time PCR using 6 ${\mu}l$ of reaction volume with extremely short denaturation step and annealing/extension step (1 sec, 3 sec, respectively) in each cycle of PCR. Using the stx1-specific URRT PCR, 35 cycled PCR were finished in time of 6 min and 38 see, also measured 7 min and 28 see including melting temperature (Tm) analysis. The detection-limit of stxl-specific URRT-PCR was estimated until 3 colony forming units / PCR with products with stable Tm at $81.42{\pm}0.34^{\circ}C$. In the applications to various STEC strains and contaminated genomic DNAs, stx1-specific URRT-PCR were tested and shown that it would be expected an useful method for the rapid detection of stx1-coded STEC strains.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.23-30
• /
• 2007

The most rapid Real-time PCR based detection method for Avian influenza A virus (AIV) subtype H5N1 was developed. The target DNA sequence in this study was deduced from H5N1 subtype-specific 387 bp partial gene of hemagglutinin, and was synthesized by using PCR-based gene synthesis on the ground of safety. Real-Time PCR was performed by $GenSpector^{TM}$ using microchip-based, total $1{\mu}l$ of reaction mixture with extremely short time in each steps in PCR. The detection including PCR-amplication and analysis of melting temperature was totally completed within 13 min. The H5N1-specific 189 bp PCR product was correctly amplified until 2.4 molecules of hemagglutinin gene as minimum of templates. This kind of PCR was designated as Quick Real-Time PCR in this study and it could be applied to detect not only AIV H5N1, but also other pathogens using PCR-based detection.