• 청정기술
• /
• 제16권2호
• /
• pp.140-144
• /
• 2010

리튬이온전지의 음극활물질로서 titania-silica 혼합물을 얻기 위해 TiCl4와 TEOS를 전구체로 사용하여 졸-겔법을 이용해 합성하였다. 졸-겔법을 이용하여 혼합물을 합성할 경우에 균일한 분포를 갖는 화합물을 제조할 수 있다. 마이크로파를 이용하여 혼합물을 열처리하여 새로운 물성을 갖는 화합물의 제조를 시도하였다. 합성한 화합물의 물성을 측정하기 위하여 화합물의 조성, 열처리 온도 및 마이크로파 처리등을 실험변수로 사용하였다. 특성 분석방법으로는 합성물질의 구조적 특성과 입자의 표면분석을 하기 위해 XRD(X-ray diffraction)와 SEM (scanning electron microscopy)과 전지 충 방전기를 사용하여 충 방전에 따르는 전지의 용량변화를 관찰하였다.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.172-177
• /
• 2003

Biphenyltetracarboximide-phenylene diamine polyimide/silica-titania ternary hybrid composites were Prepared by thermal imidization and sol-gel reaction. Fluorescence spectroscopic, scanning electron microscopy, and atomic force microscopy studies revealed that the addition of small amount of titania showed profound effects on the microstructure and photophysical behaviors of polyimide/silica hybrid composites, when the content of silica-titania mixture was small or when the ratio of silica to titania in the mixture was high.

• 멤브레인
• /
• 제19권1호
• /
• pp.47-53
• /
• 2009

본 연구의 목적은 금속 중공사형 필터에 무기 입자를 코팅하여 금속/세라믹 복합 한외여과막을 제조하는 것이다. 직경이 2.0 mm이며 기공 크기가 $2{\sim}8{\mu}m$ 범위를 갖는 니켈 중공사 필터에 급냉건조법과 침지-건조법으로 실리카 졸과 티타니아 졸을 코팅하여 금속쎄라믹 복합 한외여과막을 제조하였다. SEM과 PMI 결과로부터 기공 크기가 50 nm 수준을 갖는 것을 확인하였다. 기공 크기는 입자 크기, 소성시간 및 온도에 따라 차이를 보였다.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.281-288
• /
• 2005

The silica nanoparticles were used as support of catalyst, filling material, electronic assembler, thin film material, and sensor material. And, the titania nanoparticles were used as pigment, dielectric substance, sensor and photocatalyst. In this paper, the spherical composite particles of $TiO_2/SiO_2$with narrow size distribution and phase pure were synthesized by ultrasonic spray pyrolysis method from $TiOSO_4$ and colloidal silica solution. Using ultrasonic apparatus, this starting solution was vaporized to droplets, and these droplets were induced into tube furnace by carrier gas. The resulting composite powder was characterized by scanning electron microscopy, X-ray diffraction analysis, TG-DTA, in vitro sun protection factor(SPF) and BET surface area analysis.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.649-656
• /
• 2009

Inorganic oxide colloids dispersed in alcohol were applied to a stainless steel substrate to produce oxide coatings for the purpose of minimizing emissive thermal transfer. The microstructure, roughness, infrared emissive energy, and surface heat loss of the coated substrate were observed with a variation of the nano oxide sol and coating method. It was found that the indium tin oxide, antimony tin oxide, magnesium oxide, silica, titania sol coatings may reduce surface heat loss of the stainless steel at 300${\circ}C$. It was possible to suppress thermal oxidation of the substrate with the oxide sol coatings during an accelerated thermal durability test at 600${\circ}C$. The silica sol coating was most effective to suppress thermal oxidation at 600${\circ}C$, so that it is useful to prevent the increase of radiative surface heat loss as a heating element. Therefore, the inorganic oxide sol coatings may be applied to improve energy efficiency of the substrate as the heating element.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.173-179
• /
• 2018

Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PVA-CC) separators for supercapacitor applications. The PVA-CC separators were fabricated by mixing various ceramic particles including aluminum oxide ($Al_2O_3$), silicon dioxide ($SiO_2$), and titanium dioxide ($TiO_2$) into a PVA aqueous solution. These ceramic particles help to create amorphous regions in the crystalline structure of the polymer matrix to increase the ionic conductivity of PVA. Supercapacitors were assembled using PVA-CC separators with symmetric activated carbon electrodes and electrochemical characterization showed enhanced specific capacitance, rate capability, cycle life, and ionic conductivity. Supercapacitors using the $PVA-TiO_2$ composite separator showed particularly good electrochemical performance with a 14.4% specific capacitance increase over supercapacitors using the bare PVA separator after 1000 cycles. With regards to safety, PVA becomes plasticized when immersed in 6 M KOH aqueous solution, thus there was no appreciable loss in tear resistance when the ceramic particles were added to PVA. Thus, the enhanced electrochemical properties can be attained without reduction in safety making the addition of ceramic nanoparticles to PVA separators a cost-effective strategy for increasing the ionic conductivity of separator materials for supercapacitor applications.