• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6569-6572
• /
• 2013

In cervical cancer, one of the most common malignant tumors in women worldwide, miR-126 has been reported to exhibit decreased expression. However, its role in cervical cancer cell proliferation and drug sensitivity has remained relatively unexplored. Here, we compared the expression of miR-126 in cervical cancer tissues (n = 20) with that in normal cervical tissue (n = 20) using quantitative RT-PCR. The viability of Siha cervical cancer cells was further measured by MTT assay after transfection with miR-126 mimic (Siha-miR-126 mimic) or microRNA mimic negative control (Siha-miR mimic NC) and after treatment with various concentrations of bleomycin (BLM). IC50s were calculated, and the survival rates (SRs) of Siha cells were calculated. miR-126 expression in cervical cancer tissue was significantly decreased compared with that in normal cervical tissue (P < 0.01). The relative SRs of Siha-miR-126 mimic cells were also significantly decreased compared with those of Siha-miR mimic NC cells at 24-96 h after transfection. The IC50 of BLM in Siha-miR-126 mimic cells ($50.3{\pm}2.02{\mu}g/mL$) was decreased compared with that in Siha-miR mimic NC cells ($70.5{\pm}4.33{\mu}g/mL$) at 48 h after transfection (P < 0.05). Finally, the SRs of Siha-miR-126 mimic cells were significantly lower than those of SihamiR mimic NC cells after cultured in medium containing 40 ${\mu}g/mL$ BLM for 24-96 h (P < 0.05). These results suggest that miR-126 is expressed at low levels in cervical cancer. Upregulation of miR-126 inhibited cervical cancer cell proliferation and enhanced the sensitivity to BLM. Thus, miR-126 may represent a novel approach to cervical cancer treatment.

• 대한의용생체공학회:의공학회지
• /
• 제30권4호
• /
• pp.333-340
• /
• 2009

MR compatible coaxial-slot antenna for microwave hyperthermia was developed while its structure and size of each part were determined by computer simulation using finite element method(FEM). Its local heating performance was evaluated using tissue-mimic phantom and swine muscles. 2% agarose gel mixed with 6mM/$\ell$ $MnCl_2$ as a biological tissue-mimic phantom was heated by the proposed antenna driven by a 2.45GHz microwave generator. The temperature changes of the phantom were monitored using multi-channel digital thermometer at the distance of 0mm, 5mm, 10mm and 20mm from the tip center of the antenna. Also muscle tissue of swine was heated for 2 and 5minutes with 50W and 30W of microwave generator powers, respectively, to evaluate the local heating performance of the antenna. MRI compatibility was also verified by acquiring MR images and MR temperature map. MR signals were acquired from the agarose gel phantom using $T2^*$ GRE sequence with 1.5T clinical MRI scanner(Signa Echospeed, GE, Milwaukee, WI, U.S.A.) at Pusan Paik Hospital and were transferred to PC in order to reconstruct MR images and temperature map using proton resonance frequency(PRF) method and laboratory-developed phase unwrapping algorithm. Authors found that it has no severe distortion due to the antenna inserted into the phantom. Finally, we can conclude that the suggested coaxial-slot antenna has an excellent local heating performance for both of tissue-mimic phantom and swine muscle, and it is compatible to 1.5T MRI scanner.

• 대한의용생체공학회:의공학회지
• /
• 제36권6호
• /
• pp.251-263
• /
• 2015

Scaffolds play a crucial role in the tissue engineering. Biodegradable polymers with great processing flexibility and biocompatability are predominant scaffolding materials. New developments in biodegradable polymers and their nanocomposites for the tissue engineering are discussed. Recent development in the scaffold designs that mimic nano and micro features of the extracellular matrix (ECM) of bones, cartilages, and vascular vessels are presented as well.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.2.2-2.2
• /
• 2011

The central strategy in tissue engineering involves a biomaterial scaffold as a delivery carrier of cells and a depot to deliver bioactive molecules. The ability of scaffolds to control cellular response to direct particular repair and regeneration processes is essential to obtain functional tissue engineering constructs. Therefore, many efforts have been made to understand local interactions of cells with their extracellular matrix (ECM) microenvironment and exploit these interactions for designing an ideal scaffold mimicking the chemical, physiological, and structural features of native ECM. ECM is composed of a number of biomacromolecules including proteins, glycosaminoglycans, and proteoglycans, which are assembled together to form complex 3-dimensional network. Electrospinning is a process to generate highly porous 3-dimensional fibrous structure with nano to micro scaled-diameter, which can closely mimic the structure of ECM. In this presentation, our approaches to develop biomimetic electrospun fibers for modulation of cell function will be discussed.

• 한국방사선학회논문지
• /
• 제12권3호
• /
• pp.427-433
• /
• 2018

비침습적 치료 효과에 대한 기대로 집속 초음파를 이용한 하지정맥류 치료에 대한 많은 연구가 진행되고 있다. 본 연구에서는 초음파 정맥류 정맥 치료 효과 평가에 적용할 수 있는 생체 조직 팬텀과 조직 등가 팬텀을 제시 하였다. 제작된 팬텀은 음향학적 특징과 초음파 조사에 따른 수축률을 평가함으로써 유용성을 평가하였다. 하지정맥류가 발생하는 조직의 구조를 고려하여 피부, 지방, 근육의 세 층으로 된 다층 구조 팬텀을 제작하였으며, 각 층을 구성하는 물질은 인체와 유사한 특성을 갖도록 제작하였다. 또한 혈관 유사물질을 매식한 다층 구조 팬텀과 동물 혈관을 이용한 다층 구조 팬텀, 동물 조직을 이용한 다층 구조 팬텀을 제작하였으며, 초음파 조사에 따른 혈관 유사 물질 및 혈관 조직의 수축 정도를 B-mode 영상을 이용하여 평가하였다. 본 연구의 결과를 통하여 제시된 팬텀이 초음파 하지정맥류 치료 평가에 유효하게 활용될 수 있을 것으로 판단되었다. 또한, 집속 초음파를 이용한 하지정맥류 치료 장비 개발 및 치료 효과 검증에 중요한 역할을 할 것으로 판단된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.3-23
• /
• 2017

The achievement of tissue engineering can be highly depending on the capability to generate complicated, cell seeded three dimensional (3D) micro/nano-structures. So, various fabrication techniques that can be used to precisely design the architecture and topography of scaffolding materials will signify a key aspect of multi-functional tissue engineering. Previous methods for obtaining scaffolds based on top-down are often not satisfactory to produce complex micro/nano-structures due to the lack of control on scaffold architecture, porosity, and cellular interactions. However, a bioprinting method can be used to design sophisticated 3D tissue scaffolds that can be engineered to mimic the tissue architecture using computer aided approach. Also, in recent, the method has been modified and optimized to fabricate scaffolds using various natural biopolymers (collagen, alginate, and chitosan etc.). Variation of the topological structure and polymer concentration allowed tailoring the physical and biological properties of the scaffolds. In this presentation, the 3D bioprinting supplemented with a newly designed plasma treatment for attaining highly bioactive and functional scaffolds for tissue engineering applications will be introduced. Moreover, various in vivo and in vitro results will show that the fabricated scaffolds can carry out their structural and biological functionality.

• Medical Lasers
• /
• 제10권2호
• /
• pp.76-81
• /
• 2021

Biological tissues and organs are composed of different arrays of cells, biochemical cues, and extracellular matrices arranged in a complex microarchitecture. Laser-Assisted Bioprinting (LAB) is an emerging and promising technology that is reproducible with high accuracy that can be used for fabricating complex bioengineered scaffolds that mimic tissues and organs. The LAB process allows researchers to print intricate structural scaffolds using cells and different biomaterials essential for facilitating cell-scaffold interaction and to induce tissue and organ regeneration which cannot be achieved in a traditional scaffold fabrication. This process can fabricate artificial cell niches or architecture without affecting cellular viability and material integrity. This review tackles the basic principles and key aspects of Laser-Assisted Bioprinting. Recent advances, limitations, and future perspectives are also discussed.

• Current Optics and Photonics
• /
• 제8권5호
• /
• pp.515-515
• /
• 2024

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권3호
• /
• pp.141-155
• /
• 2016

Two-dimensional (2D) cell culture and in vivo cancer model systems have been used to understand cancer biology and develop drug delivery systems for cancer therapy. Although cell culture and in vivo model studies have provided critical contribution about disease mechanism, these models present important problems. 2D tissue culture models lack of three dimensional (3D) structure, while animal models are expensive, time consuming, and inadequate to reflect human tumor biology. Up to the present, scaffolds and 3D matrices have been used for many different clinical applications in regenerative medicine such as heart valves, corneal implants and artificial cartilage. While tissue engineering has focused on clinical applications in regenerative medicine, scaffolds can be used in in vitro tumor models to better understand tumor relapse and metastasis. Because 3D in vitro models can partially mimic the tumor microenvironment as follows. This review focuses on different scaffold production techniques and polymer types for tumor model applications in cancer tissue engineering and reports recent studies about in vitro 3D polymeric tumor models including breast, ewing sarcoma, pancreas, oral, prostate and brain cancers.

• Investigative Magnetic Resonance Imaging
• /
• 제23권2호
• /
• pp.136-141
• /
• 2019

Pelvic actinomycosis is an uncommon infectious disease. It induces a chronic, suppurative illness characterized by an infiltrative and granulomatous response and, thus, the clinical and radiologic findings may mimic other inflammatory and neoplastic conditions. A 56-year-old female with a long-standing intrauterine device was diagnosed with pelvic actinomycosis manifesting as a large uterine mass with locally infiltrative spread into surrounding tissue that mimicked uterine malignancy. Actinomyces israelii infection was confirmed with a surgical specimen, and the patient was treated with antibiotic medication. Pelvic actinomycosis must be included in the differential diagnoses of patients with an infiltrative pelvic mass extending across tissue planes or in patients with findings of multiple microabscesses, particularly in a patient with an intrauterine device, even the lesion primarily involves the uterus.