• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.55-58
• /
• 2003

Segmented polyurethanes have been widely used for various commercial and experimental blood-contacting and tissue-contacting applications such as vascular prostheses, blood pumps, heart valves, pacemaker lead wire insulation, catheters, artificial hearts, and cardiac assist devices due to their generally favorable physical and mechanical properties, as well as fairly good biocompatibility and antithrombogenicity characteristics. (omitted)

• 대한약리학회지
• /
• 제5권1호
• /
• pp.35-38
• /
• 1969

1.On isolated atrial preparation of frog, effects of sympathomimetic amines were investigated. 2. Isoproterenol, epinephrine, norepinephrine, and phenylephrine produced positive chronotropic and inotropic effects. The relative potencies for the effects of these agents were: isoproterenol > epinephrine> norepinephrine> phenylephrine. Methoxamine had no effects or depressed the atria. 3. Pronethalol antagonized the positive effects of these adrenergic agents competitively. 4. Regitine did not affect the effects of these agents. 5. These data indicate that the adrenergic agents activate the atrial tissue of the frog via stimulation of adrenergic beta-receptor.

• 대한치과의사협회지
• /
• 제13권5호
• /
• pp.415-416
• /
• 1975

1. The author have had a case of class V and class Ⅲ combined carious lesion extended on to root surface of upper right lateral incisor. 2. The patient was 40 years old female. 3. After routine root canal treatment of the tooth, the gingival flap was made by vertical incision on gingival tissue between distal surface of upper right lateral incisor and mesial surface of upper right canine. 4. Cavity preparation and amalgam filling on the carious lesion were performed and the flap was sutured.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.167-189
• /
• 1992

Frictional heat produced by cutting tools during dental implantation procedure may destroy the surrounding bone tissue and regenerative capacity and interfere ossointegration by formation of undifferentiated connective tissue. To study the effect of frictional heat according to various rotational speeds on the regenerative capacity of surrounding bone tissue, 13 ITI HS implants (8 mm) were inserted at 4 mongrel dogs. Temperatures were measured using thermocouple located 6 mm below from the marginal crest and 0.5 mm from the periphery of trephine mill during implant bed preparation. After 4 and 9 months, animals were sacrificed and specimens were examined using x-rays and light microscope. Results were as follows: 1. With drill speeds of 300, 800, 2,000, 3,500 rpm and saline irrigation, temperatures of surrounding bone were decreased from $-2.9^{\circ}\;to\;-1.7^{\circ}C$. Temperature rises of $2.0^{\circ}\;and\;2.1^{\circ}C$ were recorded with a drill speed of 5,000 rpm and irrigation. 2. With drill speeds of 800, 3,500, 5,000 rpm and no irrigation, temperatures of surrounding bone rose from $+1.5^{\circ}\;to\;+6.8^{\circ}C$, but maximum temperature was $40^{\circ}C$ at 5,000 rpm. 3. On radiographic examination, bone resorptions were observed at the upper half of implant of 5,000 rpm without irrigation and one case of 5,000 rpm with irrigation. 4. Osseointegration was unsuccessful in cases of 3,500, 5,000 rpm without irrigation due to fibrous connective tissue formation to the outer surface and hollow, but it was successful in a case of 800 rpm without irrigation. 5. Osseointegration was successful in cases of 300, 800, 2,000 and 3,500 rpm with irrigation. But fibrous connective tissue formation was observed at the hollow of implant inserted with 5,000 rpm with irrigation.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.301-320
• /
• 1995

The purpose of this study was to evaluate a new biodegradable membrane - atelocollagen as a guided tissue regeneration barrier on the dehiscence defects adjacent to the dental implants. 3 beagle dogs were selected for this study and all the mandibular premolars($P_1,P_2,P_3&P_4$) were extracted. Twelve weeks after the extraction, the edentulous ridges were formed to be placed the titanium plasma-sprayed IMZ implants. Four implant osteotomies were performed on each side of the mandible. The osteotomies were placed facially in the edentulous ridges to approximate an actual dehiscence defect as closely as possible, The standardized dehiscence defects were created 3 mm in width and 4 mm in height by osteotomy. A total 24 implants were placed. e-PTFE, ateloco11agen and $Collatape^{(R)}$ were placed to cover the defects and the one defect served as a control, not covered any membrane. By random selection, three dogs were sacrificed at 2 weeks, 4weeks and 8 weeks after fixation with 3% glutaraldehyde. A week before sacrificing, 8-week dog was infused intravenously with oxy-tetracycline 30mg/kg. The left mandibular blocks were used for full decalcified histologic preparation and the right mandibular blocks were selected for undeca1cified preparation, At 2 weeks, the regenerated bone of e-PTFE and atelocollagen groups appeared to be more dense than other groups and the percentage of bone defect fill was highest for e-PTFE and follwed by ateloco1lagen group. However, the $Collatape^{(R)}$ and control groups showed a little new bone formation. $Collatape^{(R)}$ was almost degraded within 2 weeks. At 4 weeks, the regenerated new bone were much greater and denser than at 2 weeks for e-PTFE and ateloco11agen group. Although a part of atelocollagen bagan to be degraded at the margin and surrounded by foreign body giant cells related to foreign body reaction, it was generally intact and the regenerated new bone was shown much more than at 2 weeks. The amount of new bone in $Collatape^{(R)}$ and control groups at 4 weeks were similar to that of 2 weeks group. At 8 weeks, the regenerated bone was matured and observed along the implant fixture. Direct new bone formation and calcium deposits beneath the e-PTFE were observed. No further bone growth was seen in the $Collatape^{(R)}$ and control groups. In reflected fluoromicrcocopic observation, the osteogenic activity was pronounced between e-PTFE membrane and the old bone. High osteogenic activity was also observed in atelocol1agen group. This study suggested that the ateloco11agen as well as e-PTFE could be used for guided tissue regeneration on dehiscence defects adjacent to the dental implants. But the $Collatape^{(R)}$ was completely resorbed within 2 weeks and was not a suitable membrane for guided bone regeneration.

• 대한소아치과학회지
• /
• 제35권1호
• /
• pp.11-17
• /
• 2008

본 연구는 Er:YAG laser에 의한 치수의 초기 조직반응과 calcitonin gene-related peptide (CGRP) 함유 신경섬유의 발현을 비교 평가하고자 시행하였다. Er:YAG laser와 conventional bur를 이용하여 상악 제1대구치의 교합면에 와동을 형성하였다. 와동형성 후 48시간 후에 조직을 처리하여 hematoxylin-eosin 염색과 CGRP 면역조직화학을 시행한 후 다음과 같은 결과를 얻었다. 1. Conventional bur를 이용하여 삭제한 경우, 상아질 바닥면은 균열이 없는 평면의 균일한 모양을 보였으며, Er:YAG laser의 경우에는 상아질의 면은 bur에 비해서 파동형의 불규칙적인 형태와 바닥면에서 상아세관의 주행방향을 따라 미세한 균열을 보였다. 2. Er:YAG laser에 의해 손상 받은 치수에서는 혈관확장과 노출된 치수의 손상부위를 따라 bur에서 손상 받은 치수보다 더 많은 염증세포의 침윤과 상아모세포층의 파괴를 보였다. 3. 노출손상 후에 치수신경 말단에서 CGRP 발현은 bur와 laser군 모두에서 손상을 받지 않은 정상 치수에 비해서 증가된 양상을 보였으며, 그 증가된 정도는 laser의 경우에서 더 강하였다. 위의 결과들을 종합하면, Er:YAG laser가 치수손상을 최소화하여 적용되면 치아우식 제거와 와동형성과 같은 여러 수복치료 시 유용하게 사용될 수 있으리라 사료된다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3794-3801
• /
• 2010

이 연구는 임상적으로 많이 쓰이는 3종의 조직양화제(Coe-comfort, GC Soft-Liner, Visco-Gel)의 시간에 따른 체적 안정성을 비교하였다. 시편은 10mm의 반경으로 두께를 1.5mm, 3.0mm로 각각 제작하여 두께에 따른 차이를 비교하였다. 체적의 변화는 시편 제작 후 1시간 (baseline), 12시간, 24시간, 36시간, 3일, 7일에 측정하였다. SAS 6.04 통계 package program을 이용하여 ANOVA분석하였다. 실험한 조직양화제에서는 점탄성을 상실하여 조직양화제를 교체하거나 기공 과정을 하기에 적합한 시간은 변형이 적은 혼합 후 36시간~3일이었다. Tissue conditioner의 종류에 따라 시간의 경과에 따른 탄성 변화량에는 유의할 만한 차이가 있었다(p<0.05). 조직양화제 1.5mm, 3.0mm 두께에 의해 체적안정성에 유의한 차이가 있었다(p<0.05). 자체의 이상적인 탄성 변형과 복원력만을 비교 하였을 때를 보면, Visco-Gel 3.0mm군에서 가장 안정적인 체적안정성을 보였다. 또한, 조직 양화제는 재료 간의 체적 안정성에 다양한 범위가 있어 기능인상에 적합한 것을 선택을 하는 것이 중요하다.

• Archives of Plastic Surgery
• /
• 제36권2호
• /
• pp.127-134
• /
• 2009

Purpose: Adipose tissue injection as a free graft for the correction of soft - tissue deficiency or depression deformity is a widespread procedure in plastic surgery. This study is to analyze the changes and viability of cryopreserved adipose tissue and to find out efficient long - term storage period. Methods: After centrifugation of aspirated abdominal tissues, $10m{\ell}$ of packed Adipose tissue were freezed at $-20^{\circ}C$. For 2, 4, 6, 8 months, each frozen samples were taken and injected into scalp of SCID mice. After 15 weeks, injected Adipose tissue were sampled and analyzed at 2 months interval. We compared and analyzed each group about the weight of the injected fat, histologic impressions, activity of mitochondria, size of a fat cell and rate of survival. Results: Significant weight changes were observed in cryopreservation for 2 months(p<0.05). Histologic changes were observed, independent of the freezing period with H - E stain. Among cryopreservations for 2, 4, 6 months, no significant change were observed. The reduction of mitochondrial enzymatic activity was observed independent of time interval but activity of mitochondrial dehydrogenase was reduced less than 50% in MTT assay. Conclusion: Freezing in $-20^{\circ}C$ for 6 months has no adverse effect to Adipose tissue, but fragile adipocytes, damaged cell membrane during harvesting procedure, were disrupted within 1 - 2 month and the maximum volume reduction were followed less than 2 months. These results demonstrate that tissue preparation cells without membrane damage have the greatest viability level and cryopreservation less than 2 months has great volume effect and cryopreservation for 6 months has stable volume effect.

• 폴리머
• /
• 제29권2호
• /
• pp.198-203
• /
• 2005

용융 압출 발포에 의하여 폴리락틱산(PLLA) 지지체를 제조하고 발포 조건이 지지체의 구조와 기계적 특성에 미치는 영향을 살펴보고 이를 염 추출법에 의하여 제조된 지지체와 비교하였다. 발포제를 함유한 PLLA 용융체가 압출기 및 다이에서 체류하는 시간이 발포제의 무게를 최대로 감소시키는 시간과 일치하여야 최적의 PLLA 지지체의 구조를 얻을 수 있음을 확인하였다. PLLA지지체의 구조를 유지하기 위해서는 발포제의 함량을 $10\;wt\%$ 이하로 조절해야 하며 PLLA 지지체의 다공도는 PLLA의 압출기에서의 체류시간에 가장 큰 영향을 받음을 알 수 있었다. 용융 압출 발포에 의하여 얻어진 지지체는 일반적으로 염 추출법에 의하여 제조된 지지체보다 다소 낮은 다공도를 갖지만 발포 조건의 조절에 의하여 적절한 다공 크기와 다공의 연결성을 가지며 동시에 우수한 기계적 특성을 가져 경조직 재생(hard tissue regeneration)용으로 사용이 가능할 것으로 사료된다.