• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.80-91
• /
• 1995

A theoretical models has been prepared which describes the noise generated by tire/road interaction for the tire structure-borne sound analysis. The model begin with a set of thin shell equations describing the motion of the belt of a radial ply tire, as drived by Bohm('mechanisms of the belted tire', Igeniur-Archiv, XXXV, 1966). Structural quantities required for these equations are derived from material properties of the tire. The rolling shape of a tire is computed from the steady-state limit of these equations. Vibrational response of the tire is treated by the full dependent shell equations. The force input at the tire/road interface is calculated on the basis of tread geometry and distribution of contact patch pressure. Radiation of noise is calculated by a simpson integral. Using the programs, the effect on noise of various tire design variations is computed and discussed. Trends which lead to quiet tire design are identified.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1493-1499
• /
• 2004

This paper describes the speckle shearing interferometry, a non-destructive optical method, for quantitative estimation of void defect and monitoring separation defect inside of a pneumatic tire. Previous shearing interferometry has not supplied quantitative result of inside defect, due to effective factors. In the study, factors related to the details of an inside defect are classified and optimized with pipeline simulator. The size and the shape of defect can be estimated accurately to find a critical point and also is closely related with shearing direction. The technique is applied for quantitative estimation of defects inside of a pneumatic tire. The actual traveling tire is monitored to reveal the cause of separation and the starting points. And also unknown void defects on tread are inspected and the size and shape of defects are estimated which has good agreement with the result of visual inspection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1237-1240
• /
• 2007

Tire noise is a major noise source at high speeds. One of the noise source is controlled by pattern and structure. Pattern noise is effected by the shape of tread. And the bending stiffness of tire is influenced to the resonance of tire‘s belt. But in high frequency region, FEA is not appropriated with application. So this paper discusses about wave propagation of tire. There has been much effort to verify the flexural wave velocity with structure design specification.

• Steel and Composite Structures
• /
• v.15 no.4
• /
• pp.451-466
• /
• 2013

This paper deals with the multi-objective optimization of tire reinforcement structures such as the tread belt and the carcass path. The multi-objective functions are defined in terms of the discrete-type design variables and approximated by artificial neutral network, and the sensitivity analyses of these functions are replaced with the iterative genetic evolution. The multi-objective optimization algorithm introduced in this paper is not only highly CPU-time-efficient but it can also be applicable to other multi-objective optimization problems in which the objective function, the design variables and the constraints are not continuous but discrete. Through the illustrative numerical experiments, the fiber-reinforced tire belt structure is optimally tailored. The proposed multi-objective optimization algorithm is not limited to the tire reinforcement structure, but it can be applicable to the generalized multi-objective structural optimization problems in various engineering applications.

• Elastomers and Composites
• /
• v.5 no.2
• /
• pp.181-187
• /
• 1970

In vulcanizates of NR/SBR blending compounds, the physical properties decrease as the contents of SBR increase for the most part. but the abrasives showed reverse performance. However, since these conditions enough satisfy the requirements of tread, carcass and sidewall of tire, we found it was possible to take use of the quantity of SBR contained high on tire manufacturing.

• The tire
• /
• s.109
• /
• pp.40-44
• /
• 1983

당협회에서는 금년도에도 교통부, 치안본부, 한국도로공사의 후원으로 4차에 걸쳐 고속도로의 휴게소에서 무료 타이어 점검 및 서비스를 실시하였다. 금년도의 점검결과도 예년과 마찬가지로 타이어 정비불량률이 무려 45%에 달하고 있으며, 차종별로는 승용차가 53%로 가장 불량한 것으로 나타났으나, 이는 주로 공기압부적 차량이고, 실제로 타이어 정비상태가 가장 불량한 것은 트럭으로서 52%였다. 정비불량항목으로는 과마모가 제일 많아 전체 타이어 정비불량건수중 43%를 차지하였으며 트럭에 가장 많았다. 특히 관광버스에는 재생 타이어 취부률이 35%나 되었고 또한 트럭에는 눈올 때에만 사용토록 되어 있는 스노 타이어를 봄, 여름, 가을까지 계속 사용하고 있는 차량이 13%나 되어 발열에 의한 트레드 세페레이션 (Tread SEparation) 사고의 위험성이 많았다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.216-219
• /
• 2015

일반적으로 타이어의 정보를 알기 위해서는 운전자나 정비사가 직접 타이어를 육안으로 타이어의 측면의 정보를 확인하거나, 타이어의 측면을 사진을 찍어 확인하는 방법을 이용한다. 이러한 방법은 개개인의 직접 인터넷으로 정보를 알아 봐야하고, 사진 찍을때의 환경에 따라 정보가 틀려져, 이는 개개인의 긴간적인 부담과 정보의 오차가 발생하게 된다. 그래서 본 논문에서는 측면의 타이어 정보 인식을 더욱 더 정확하고 시간적인 부담을 줄이기 위해 범위 레이저 센서를 이용하여 타이어의 옆면을 체크 하는 시스템을 개발하여 객관적이고 정확한 판단을 내릴 것이다.

• The tire
• /
• s.113
• /
• pp.41-45
• /
• 1984

당 협회에서는 금년도 상반기에도 교통부, 치안본부, 한국도로공사의 후원으로 2차에 걸쳐 고속도로상의 휴게소에서 무료로 타이어점검 및 서비스를 실시하였다. 금년도 상반기 점검결과 타이어 정비불량률은 예년에 비하여 다소 감소되기는 하였으나 아직도 전체 점검차량의 36%나 되었으며, 차종별로는 트럭이 57%로 가장 불량한 것으로 나타났다. 정비불량항목으로는 과마모가 제일 많아 전체 타이어 정비불량건수 중 33%를 차지하였으며, 특히 관광버스에는 재생 타이어를 끼고 고속도로를 운행하고 있는 것이 28%나 되었고, 눈 올 때에만 사용하도록 되어 있는 Snow타이어를 계절에 관계없이 계속 사용하고 있는 차량이 14%나 되어 발열에 의한 Tread Separation 사고의 위험성이 많았다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.81-90
• /
• 1998

Noise produced by surface transportation vehicles affects our daily lives, penetrating wherver man lives or works. In this paper, a theoretical model has been studied to describe the sound radiation by the surface vibration of in-service tires and studied about an experiment on sound radiation characteristic due to tire vibration. When a tire is analyzed, it has been modeled as a curved beams with distributed sprongs and dash-pots which represent the radial, tangential stiffnes and damping of tire, respectively. The experimental investigation for the sound radiation of a radial tire has been made. Based on the sound intensity and STSF(Spatial Transformation of Sound Field) techniques. the sound pressure and the sound radiation are measured. The comparison of numerically analyzed results with experimental results was made seperately for the tire in rotation. As a result of this study, a program for the prediction of the tire vibration sound radiation was intended to by developed which enables a designer of a tire to foresee the influence of the various design factors on the tire vibration sound radiation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.346-349
• /
• 2015

Generally, in order to verify the degree of tire wear or abnormal wear, a driver or an auto mechanic checks the degree of tire wear and the existence of tire abnormality, directly with the naked eye or by way of using a gauge equipment. In case of such verification, individual subjective judgments may be involved or a driver may suffer heavy burdens to expend the time and cost for using the wheel alignment equipment. Therefore, this thesis will use a number of laser sensors to check the existence of abnormal wear and the degree of wear on each tire and develop a system checking the sides of tires to receive the tire information, so that subjective judgments may be overcome and objective and accurate judgments may be rendered.