• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.12-17
• /
• 2010

본 연구는 자원의 재활용 측면에서 적용한 폐타이어 분말을 혼입한 모르타르에 난연제를 첨가하여 그 난연특성을 알아보고자 한다. 폐타이어 분말의 혼입으로 단열성능 향상은 이미 검증이 되었으나, 단열성과 결합력의 상반된 재료 특성으로 인해 화재에는 취약한 바. 이에 난연제를 첨가하여 인명안전에 만전을 기하고자 한다. 폐타이어 분말을 혼입한 모르타르의 난연제를 첨가하여 첨가 비율에 따른 그 특성을 알아보고자 한다. 화재 초기의 특성을 알 수 있는 재료의 가연성 여부를 실제 화재와 유사한 복사열에 의해 시험하고자 하였으며. 실험방법은 한국건자재 시험연구원에 의뢰하여 ISO 5657 절차에 의한 재료의 착화시간, 불꽃 발생여부, 시험체의 형태변화 등을 고찰하고자 한다. 폐타이어 분말이 혼입된 모르타르와 난연제(무기계)의 배합비율은 폐타이어 분말의 0%, 30%, 60%, 90% 비율로 수산화알루미늄을 첨가하며 조연제인 삼산화안티몬은 난연제의 10%를 첨가한다. 시험체를 수평설치하여 일정한 복사열($1{\sim}5W/cm^2$)을 시험체 상부표면에 노출시키면 열이 시험체 표면에서 내부로 전도되어 온도가 상승한다. 온도가 충분히 높다면 시험체는 열분해하면서 가연성가스를 발생시킨다. 이 때 점화원인 점화기구의 작은 불꽃은 시험체 중앙 위의 10mm 지점에 규칙적인 간격으로 접염하였을때의 재료의 지속적인 표면 착화특성(착화시간) 평가한다. 난연제 미첨가시에도 착화가 일어나지 않아 폐타이어분말이 혼입된 모르타르의 가연성은 적은 것으로 볼 수 있으며, 화재실내에 존재하는 가연물의 양을 평가하는 화재하중에 이를 반영할 수 있다. 폐타이어 분말에 무기계 난연제를 첨가함에 따라 흡열효과에 의해 불꽃은 발생하지 아니하고 폐타이어 분말입자의 분해속도도 지연되었음을 확인할 수 있다. 복사열로 인해 난연제인 수산화알루미늄이 열분해하여 모르타르내 수증기 분압이 증가하여, 폐타이어 분말의 불꽃이나 연소형태는 보이지 않았다.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.95-103
• /
• 2003

Driving safety of a vehicle is largely influenced by the damper and the tire. Developed in this research is a fault diagnosis algorithm for the two components so that the driver can be promptly informed when fault occurs in one or both of them. To this end, the damper and the tire were modeled using the neural network from their experimental data, and fault diagnosis was made using frequency responses of the damping force and the dynamic wheel force. The algorithm was tested via experiments, and it demonstrated successful diagnostic performance under various driving conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1524-1529
• /
• 2003

In this paper deals with a unique method for measuring vehicle states such as body sideslip angle and tire sideslip angle using GPS velocity information in conjunction with other sensors. A method for integrating Inertial Navigation System (INS) sensors with GPS measurements to provide higher update rate estimates of the vehicle states is presented, and the method can be used to estimate the tire cornering stiffness. The experimental results for the GPS velocity-based sideslip angle measurement and cornering stiffness estimates are compared with the theoretical predictions. From the experimental results, it can be concluded that the proposed method has an advantage for future implementation in a vehicle safety system.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.161-170
• /
• 2007

As one of the major handling performances of the vehicle and tire, the steering feel is very important in the high speed where safety and refinement is a major concern for the drivers. This paper presents both subjective and objective techniques for the assessment of the steering feel including the on-center feel and steering response. For this, subjective evaluation method of the steering feel was studied at first and then objective parameters were selected by considering the process by which the steering feel is evaluated subjectively. From statistical analysis of subjective and objective data for the several vehicles and professional drivers, it was found that the subjective assessment of the steering feel could be successfully explained by means of the suggested objective parameters. Also, the main objective parameters related to the subjective assessment of the steering feel could be found.

• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.499-505
• /
• 2012

TPMS(Tire Pressure Monitoring System)는 차량에서 사용되는 무선통신기기의 일종으로 운전자가 타이어의 상태를 보다 효율적으로 파악하고 관리하기위한 안전보조 시스템으로 정의할 수 있다. TPMS는 무선통신을 사용하므로 데이터 송/수신 시 각종 잡음이나 간섭에 의한 통신장애가 발생하게 된다. 운전자의 안전과 직결되는 타이어 사고를 사전에 예방하고 무선통신으로 인한 데이터 전송 시 보다 정확한 데이터 신뢰성 확보를 위해 본 논문에서는 신호처리수신부에서 수신신호의 SINR(signal-to-interference and noise ratio, 신호 대 간섭 및 잡음 비)을 측정하여 데이터 신뢰도를 판정하는 신뢰도 판정기법을 제안한다. 또한, 이를 수행하기 위한 효과적인 데이터 신뢰성 판정 알고리즘 구조를 제안한다. 본 논문에서 제안된 데이터 신뢰성 판정기법은 TPMS 뿐만 아니라 센서를 이용한 양방향통신 시스템에서 폭넓게 사용될 수 있을 것으로 판단되다. 컴퓨터 시뮬레이션을 통해 95%, 97%, 99%의 데이터 신뢰도를 만족하는 임계 SINR 값을 확인한다.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.45-50
• /
• 2013

레조르시놀은 목재 및 타이어용 접착제, 합성수지 염료의 원료 등으로 널리 사용되고 있다. 이 물질은 상온에서 흰색 결정으로 분진은 공기 중에서 폭발성 혼합물을 형성할 수 있고 밀폐 공간에서 열에 노출 되었을 경우 폭발 위험성이 있다고 알려져 있다. 본 연구에서는 레조르시놀 취급시 화재 및 폭발 사고 등의 예방을 위한 해당 물질의 열분석, 열안정성, 분진폭발특성 및 최소점화에너지 등의 화재 폭발위험 특성을 평가하였다. 이들 연구결과는 레조르시놀의 사용 및 취급 시 공정의 안전 정보로 활용될 수 있을 것이다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.33-38
• /
• 2013

Many occupational workers or professionals have to walk on the various floors for a long period of time. The objective of this study was to develop the safety shoes with increased traction through the material selection. In order to fulfill our objective, first, two kinds of filler were selected to compare the wear mechanism at outsole surface. The developed rubber materials were tested with two kinds of portable slip meters. The sample safety shoes with developed rubber materials were also tested with subject in the laboratory. During walking, the safety shoes were naturally abraded with counter surface. The coefficient of friction(COF) was gradually decreased with number of steps to 30,000, while the COF was abruptly increased from 30,000 to 40,000. The experimental results showed that COF tested with silica rubber was at least 10% higher than that with carbon black rubber in wet or detergent condition. It has been well recognized that filler properties play a important role in wet traction in the tire industry. However it has been unclear that filler properties would be decisive factor in safety shoes. Our study shows that silica exhibits a higher slip resistance than carbon black without reference to wear states in wet or detergent condition. So, this results will provide guides for outsole compounders to develop new products and improve product performance.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.58-63
• /
• 2007

Vehicular safety and occupant injury have been of considerable interest to the public. The dynamic response of an articulated vehicle is different from that of single body vehicle due to its geometric and inertia properties. Articulated vehicles have the tendency to jackknife if they lose driving safety. Influence of factors for driving safety of an articulated vehicle(Tractor-Semitrailers) has been analysed by the EDVTS, a kinetic analysis program for an articulated vehicle. EDVTS permits an analyst to investigate the effect of many variables in a short period of time, and enables to obtain an accurate explanation of driving safety. The factors used in the analysis include the load, friction coefficient, tire flat, increase of braking force, and trailer geometry. Based on the results, the articulation angle and driving safety were influenced remarkably by the load, coefficient of friction, increase of braking force. However, trailer geometry, such as length and width, did not affect articulation angle and driving safety

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.455-462
• /
• 2000

The characteristic of “Korea LRT Carbody” is designed by using AED(All Extrusion Design) method. This is developed in Europe and be introduced in this paper minutely. The window type of “Korea LTR” has no supported frame, so the passengers ensure the outside view widely. The passenger's door will designed by plug type - This is the first time in Korea. In this report we have an object to the strength analysis for the carbody design. For the purpose of safety and lightening, we are going to research the section of thickness through optimization design.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.