• Journal of Astronomy and Space Sciences
• /
• 제31권4호
• /
• pp.341-346
• /
• 2014

A prototype of the GMT FSM has been developed to acquire and to enhance the key technology - mirror fabrication and tip-tilt actuation. The ellipsoidal off-axis mirror has been designed, analyzed, and fabricated from light-weighting to grinding, polishing, and figuring of the mirror surface. The mirror was tested by using an interferometer together with CGHs, which revealed the surface error of 13.7 nm rms in the diameter of 1030 mm. The SCOTS test was employed to independently validate the test results. It measured the surface error to be 17.4 nm rms in the diameter of 1010 mm. Both tests show the optical surface of the FSMP mirror within the required value of 20 nm rms surface error.

• 한국시뮬레이션학회논문지
• /
• 제27권4호
• /
• pp.69-77
• /
• 2018

발사관은 탑재물을 보관하고 외부 환경으로부터 부식 및 파손되는 것을 방지하는 역할을 한다. 발사관과 유도탄의 제작, 조립 그리고 장입 상태에 따라 발사할 때 유도탄의 초기 거동을 결정하게 된다. 본 연구의 목적은 유도탄이 발사관에서 사출될 때 유도탄의 초기 거동을 결정하는 요소를 통계적으로 분석하여 발사관의 안전성을 확인하는 것이다. 유도탄이 발사될 때 거동에 영향을 주는 오차 요소들을 선정한 후 Monte-Carlo 시뮬레이션을 수행하여 통계적으로 분석하였다. 시뮬레이션 결과를 바탕으로, 각 오차 요소들을 고려한 다물체 동역학 해석을 상용프로그램인 Recurdyn을 이용하여 동역학 해석을 수행하여 유도탄 발사할 때 발생하는 중력 침하 및 레일과 슈 사이에 발생하는 응력을 구하였다. 해당 결과를 바탕으로 현재 설계된 발사관에 대한 안전성을 검증하였다.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.35-44
• /
• 2009

Long stroke Fast Tool Servo (LFTS) with maximum stroke of $432{\mu}m$ is designed, manufactured and tested for fabrication of optical free-form surfaces. The large amount of stroke in LFTS has been realized by utilizing the hinge and lever mechanisms which enable the displacement amplification ratio of 4.3. In this mechanism the peculiar shape was devised for maximizing the displacement of end tip in LFTS and special mechanical spring has been mounted to provide the sufficient preload to the piezoelectric actuator. Also, its longitudinal motion of tool tip can be measured by capacitive type displacement sensor and closed-loop controlled to overcome the nonlinear hysteresis. In order to verify the static and dynamic characteristics of designed LFTS, several features including step response, frequency response and cut-off frequency in closed-loop mode were experimentally examined. Also, basic machining result shows that the proposed LFTS is capable of generating the optical free-form surface as an additional axis in diamond turning machine.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.64-68
• /
• 2014

This paper is intended to provide experimental data for the design of the small VAWT(vertical axis wind turbine). Three types(lift, drag, and hybrid) of the blade of VAWT are tested with digital wind tunnel in this study. From the test, the relation of power coefficient and tip speed ratio for the blades are evaluated and compared each other depending on the blade type. Especially, the characteristics of hybrid blade which is shown to be expanded in the market without any logical data is proposed in the relation of power coefficient and tip speed ratio. It is shown that the hybrid blade can be used to make higher starting torque with trade off of degradation of power coefficient.

• Journal of Plant Biotechnology
• /
• 제7권3호
• /
• pp.175-181
• /
• 2005

This work described some essential factors necessary for micro-propagation of banana for mass production of synthetic seeds for germ plasm conservation, and how peroxides activity of conserved tissue was influenced. Shoot tips of field grown plants were used to obtain shoot clusters on shoot proliferation medium (MS medium supplemented with 5 mg/l BAP). Using longitudinally-split shoot tip technique, 18720, 8640, 7488, 2016 plantlets were obtained from one shoot tip of Maghraby, Grand Naine, Balady, and Williams, respectively, in six subculture, one month each, on solid medium. Shoot tips excised from in vitro grown plantlets were encapsulated in calcium-alginate beads and stored at $4^{\circ}C$ for one month on half-strength MS basal medium without growth regulators or sugars. After one month all the viable-conserved synseeds formed shoots when they were transferred to MS basal medium, some of them showed synchronous formation of shoot and root systems in one week. Plants retrieved from encapsulated shoot tips were hardened off and transferred to soil.

• Journal of Species Research
• /
• 제5권3호
• /
• pp.318-323
• /
• 2016

Acrobeles ciliatus (von Linstow, 1877) and Plectus parietinus (Bastian, 1865) are newly collected from Korea. Acrobeles is similar to those nematode belongs to Rhabditidae and Panagrolaimidae by having terminal bulb without medium bulb but different by having complex, vines shaped labial attachment. A. ciliatus differed from other Acrobeles species by lateral fields with two incisures, primary axils U-shaped, and secondary axils V-shaped. Head region set off with the neck, three high labial probolae present, each having 5 tines at inner margins and 5-7 at outer margins, and two elongate apical tines. Also, it differs from the longer female body. Plectus parietinus is distinguished from all other species of Plectus by the prominent hypodermal glands, the relatively small amphid, the distinct and well set-off lips and by the subdorsal distal caudal seta on the left side of the tail. Stoma without stylet. Oesophagus about 1/4 of total body length with terminal bulb. Anus ca. $100{\mu}m$ from posterior extremity. Vulva is at middle of body. Have spinneret on tail tip.

• 방사성폐기물학회지
• /
• 제22권2호
• /
• pp.201-210
• /
• 2024

Because most spent nuclear fuel storage casks have been designed for low burnup fuel, a safety-significant high burnup dry storage cask must be developed for nuclear facilities in Korea to store the increasing high burnup and damaged fuels. More than 20% of fuels generated by PWRs comprise high burnup fuels. This study conducted a structural safety evaluation of the preliminary designs for a high burnup storage cask with 21 spent nuclear fuels and evaluated feasible loading conditions under normal, off-normal, and accident conditions. Two types of metal and concrete storage casks were used in the evaluation. Structural integrity was assessed by comparing load combinations and stress intensity limits under each condition. Evaluation results showed that the storage cask had secured structural integrity as it satisfied the stress intensity limit under normal, off-normal, and accident conditions. These results can be used as baseline data for the detailed design of high burnup storage casks.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.95-100
• /
• 1998

The purpose of this study is to describe the change of the spring bloom and oceanographic condition. The variation of pigment concentration derived from the satellite ocean color data has been analyzed. According to the movement of blooming area, blooming was very concerned with a rising trend of sea surface temperature and a supply of nutrients. A nutrient rich water carried by the Oyashio encounters with the warm Core ring, where mixings and blooms are observed. We examined the correlation by using the satellite observations of the temperature and chlorophyll-a for the spring seasons (May, June, July) of 1998 the off Sanriku area (38-43N, 141- l50E). Using the SeaWiFS data, we process the data into the level-3, which contains the geophysical value of chlorophyll-a. And chlorophyll-a data is mapped for the water between 110E and 160E, and 15N and 52N with a 0.08 * 0.05 degree grid for each image. And Sea Surface Temperature (SST) data is produced using the AVHRR onboard the NOAA. The SST is derived by the MCSST. Then, the data is mapped for the water as much as chi-a data. And these gridded image was made by detection of each water masses, which are Kuroshio Extension, the warm-core ring and the Oyashlo Intrusion, etc., using those satellite images to determine short term change. Off Sanriku is a place where warm-water pool and the Oyashio at-e mixed. When warm streamer has intruded in cold water, the volume of phytoplankton increases at the tip of warm streamer. Warm water streamer was trigger of occurring blooming. And also, SeaWiFS images provided as much information for the studies of chlorophyll-a concentrations in the surface.

• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.233-244
• /
• 2012

The Korea Astronomy and Space Science Institute and the Department of Astronomy at the University of Texas at Austin are developing a near infrared wide-band high resolution spectrograph, immersion grating infrared spectrometer (IGRINS). The compact white-pupil design of the instrument optics uses seven cryogenic mirrors, including three aspherical off-axis collimators and four flat fold mirrors. In this study, we introduce the optomechanical mount designs of three off-axis collimating mirrors and one flat slit-viewer fold mirror. Two of the off-axis collimators are serving as H and K-band pupil transfer mirrors, and are designed as system alignment compensators in combination with the H2RG focal plane array detectors in each channel. For this reason, the mount designs include tip-tilt and parallel translation adjustment mechanisms to properly perform the precision alignment function. This means that the off-axis mirrors' optomechanical mount designs are among the most sensitive tasks in all IGRINS system hardware. The other flat fold mirror is designed within its very limitedly allowed work space. This slit-viewer fold mirror is mounted with its own version of the six-point kinematic optics mount. The design work consists of a computer-aided 3D modeling and finite element analysis (FEA) technique to optimize the structural stability and the thermal behavior of the mount models. From the structural and thermal FEA studies, we conclude that the four IGRINS mirror mounts are well designed to meet all optical stability tolerances and system thermal requirements.

• 한국한의학연구원논문집
• /
• 제18권3호
• /
• pp.87-93
• /
• 2012

Objectives : The present study is to verify whether the deformation of ear acupuncture needle tips that are currently on the market is caused during the process of initial packaging. Methods : Ear acupuncture needles distributed from three different companies were collected to measure the size of the groove on the transparent plate which is used in for the intial packaging. Then the tolerance range for off-centered tips, which represent the range of the groove size that is safe from damaging the needle tip, was determined based on the vertical length measured from tip to handle. 200 ear acupuncture needles were dipped in alcohol and scanned to confirm the position of the needles. Stereo-microscope was used to observe the needle tips that were located outside the tolerance range. Results : The increased number of ear acupuncture needle tips placed outside the tolerance range were seen from in the order of C company, A company and B company. The increased deformation of the needle tips caused by initial packaging was observed in the order of A company, C company and B company. Conclusion : Only the ear acupuncture needles from B company showed the strong correlation between needle tip deformation and initial packaging. It has been observed that the deformation of the ear acupuncture needles is mainly due to manufacturing process, not the packaging process.