• 동력기계공학회지
• /
• 제19권3호
• /
• pp.11-15
• /
• 2015

In this paper, the multi-point hydrogen detection system based on the combination of the hetero-core optical fiber SPR hydrogen tip sensor and interrogator by pseudorandom noise (PN) code correlation reflectometry has been developed. In a light intensity-based experiment with an LED operating at 850 nm, it has been presented that a transmitted loss change of 0.32dB was induced with a response time of 25 s for 4% $H_2$ in $N_2$ in the case of the 25-nm Au, 60-nm $Ta_2O_5$, and 5-nm Pd multi-layers film. The proposed sensor characteristic shows excellent reproducibility in terms of loss level and time response for the in- and out- $H_2$ action. In addition, in the experiment for multi-point hydrogen detection, all sensors show the real-time response for 4% hydrogen adding with reproducible working. As a result, the real-time multi-point hydrogen detection could be realized by means of the combination of interrogating system and hetero-core optical fiber SPR hydrogen tip sensors.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.115-126
• /
• 2019

The long-term settlement characteristics for the cast-in-place bored pile in the deep-thick soft soil are investigated by post-grouting field tests. Six cast-in-place bored engineering piles and three cast-in-place bored test piles are installed to study the long-term settlement characteristics. Three post-grouting methods (i.e., post-tip-grouting, post-side-grouting, and tip and side post-grouting) are designed and carried out by field tests. Results of the local test show that decreased settlements for the post-side-grouted pile, the post-tip-grouted pile and the tip and side post-grouted pile are 22.2%~25.8%, 30.10%~35.98% and 32.40%~35.50%, respectively, compared with non-grouted piles. The side friction resistance for non-grouted piles, post-side-grouted pile, post-tip-grouted pile and the tip and side post-grouted pile undertakes 89.6~91.3%, 94.6%, 92.4%~93.0%, 95.7% of the total loading, respectively. At last, the parameters back analysis method and numerical calculation are adopted to predict the long-term settlement characteristics of the cast-in-place bored pile in the deep-thick soft soil. Determined Bulk modulus (K) and a creep parameter (Ks) are used for the back analysis of the long-term settlement of the post-grouted pile. The settlement difference between the back analysis and the measurement data is about 1.11%-7.41%. Long-term settlement of the post-grouted piles are predicted by the back analysis method, and the predicted results show that the settlement of the post-grouted pile are less than 6 mm and will be stable in 30 days.

• 자원리싸이클링
• /
• 제25권6호
• /
• pp.41-49
• /
• 2016

본 연구에서는 코발트 염화물($CoCl_2$) 용액을 원료로 하여 분무열분해 반응에 의하여 평균입도 50 nm 이하의 코발트 산화물($Co_3O_4$) 분말을 제조하였으며 원료용액이 분사되는 노즐 팁의 크기 변화에 따른 입자들의 특성 변화를 파악하였다. 노즐 팁의 크기가 1 mm인 경우에는 형성된 대부분의 액적형태는 구형을 이루고 있으며 표면은 매우 치밀한 조직을 나타내고 있음을 알 수 있었다. 최종 형성된 입자들의 평균입도는 20 ~ 30 nm이었다. 노즐 팁의 크기가 2 mm인 경우에는 형성된 액적형태는 일부는 구형을 이루고 있었지만 상당 부분은 심하게 분열된 형태를 나타내고 있었다. 노즐 팁 크기가 5 mm인 경우에는 구형을 이루는 액적형태는 거의 존재하지 않았으며 거의 대부분 심하게 분열된 상태를 나타내고 있었다. 액적형태의 표면조직은 다른 노즐 팁 경우에 비하여 치밀함이 크게 감소하였다. 형성된 입자들의 평균입도는 약 25 nm이었다. 노즐 팁 크기가 1 mm로부터 2 mm 및 3 mm로 증가함에 따라 XRD 피크들의 강도는 거의 변화가 없는 반면 노즐 팁 크기가 5 mm로 증가되는 경우에는 피크의 강도가 현저히 감소하게 되었다. 노즐 팁 크기가 1 mm로부터 2 mm 로 증가함에 따라 입자들의 비표면적은 감소하였으며 5 mm로 증가되는 경우에는 비표면적이 현저히 증가하였다.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.219-227
• /
• 2007

A stereo-PIV (particle image velocimetry) technique is used to investigate the vortical structure of the wake behind a rotating propeller in the present study. A four bladed propeller is tested in a cavitaion tunnel without any wake screen. Hundreds of instantaneous velocity fields are phase-averaged to reveal the three dimensional spatial evolution of the flow behind the propeller. The results of conventional 2-D PIV are also compared with those of the stereo-PIV to understand the vortical structure of propeller wake deeply. The variations of radial and axial velocities in the 2-D PIV results seem to be affected by the out-of-plane motion. generating a little perspective error in the in-plane velocity components of the slipstream. The strong out-of-plane motion around the hub vortex also causes the perspective error to vary the axial velocity component a little at the near wake region. The out-of-plane velocity component had the maximum value of about 0.3U0 in the tip vortices and continued its magnitude in the wake region.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.24-31
• /
• 2003

In the gas cutting of plate steel, the quality of the cut surfaces and sections is strongly dependent on the cutting conditions such as cutting speed, kerf width, plate thickness, material, distance between tip and specimen, and cutting oxygen pressure etc. The cutting tests of plate steel were carried out using CNC gas cutting machine. This paper deals with cut surface and section characteristics of plate steel in CNC gas cutting. Both top and bottom widths of kerf, the surface roughness(Ra, Rmax) of cutting surfaces are measured under various cutting conditions such as cutting speed, material, distance between tip and specimen, and cutting thickness. The photographs of cut surface and cut section are also analyzed under various cutting conditions.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.63-69
• /
• 2006

By utilizing a field emission gun and a biprism installed on a transmission electron microscope (TEM), electron holography is extensively carried out to visualize the electric and magnetic fields of nanomaterials. In the electric field analysis, the distribution of electric potential in a sharp tip made of W coated with $ZrO_2$ is visualized by applying the voltage to the tip. Denser contour lines due to the electric potential are observed with an increase in the bias voltage. In the magnetic field analysis by producing the strong magnetic field with a sharp magnetic needle made of a permanent magnet, the in situ experiment is carried out to investigate the magnetization of hard magnetic materials. The results of these experiments clearly demonstrate that electron holography is a promising advanced transmission electron microscopy technique to characterize the electric and magnetic properties of nanomaterials.

• 대한한의학원전학회지
• /
• 제26권4호
• /
• pp.95-103
• /
• 2013

Objective : I would like to study the relationship between the theory of 'Lock, Door and Axis' with the principal of following to the 'Tip, Root and Middle qi' in Huang-Di-Nei-Jing. It can be analysed from the relativeness among the sentences to appearing in Shang-Han-Lun. And consider the theoretical relationship of the two books. Method : First, I search out the exact meaning of 'Lock, Door and Axis' theory. Second, The principal of following to the 'Tip, Root and Middle qi' is closely associated with 'Lock, Door and Axis' theory. Third, I would like to prove that the several sentence in the Shang-Han-Lun are closely related to the Huang-Di-Nei-Jing. Result : Zhang Zhong-jing's Shang-Han-Lun quote a theoretical basis in the Huang-Di-Nei-Jing. Furthermore, it extensively quote to explan a disease and treatment, and so on. Conclusion : It is necessary to study hard the Huang-Di-Nei-Jing for understand clearly the sentences of Shang-Han-Lun. I think that Huang-Di-Nei-Jing have a decisive effect on the Zhang Zhong-jing's thinking to the disease and his medical theory.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.68-77
• /
• 1994

TIG welding process is applied for the active metal such as aluminum and titanium, also sometimes for overlay welding of superalloy. However the welding speed to be applied is very low because of the unstable bead formed in the region of high current and high welding speed. The present study was carried out to examine the basic phenomena of high speed TIG melt run welding by the 2% Th - W electrode(dia.3.2mm) of various tip shapes.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권4호
• /
• pp.230-238
• /
• 2011

100 kW 용량의 조류발전용 수평축 터빈(HAT)임펠러의 성능에 대한 연구를 위하여 단면 및 날개 끝 형상을 변형시킨 지름700 mm의 모형 임펠러를 설계하고 부산대학교 예인수조에서 모형 시험을 수행하였다. 축척효과를 확인하기 위하여 각각의 임펠러에 대하여 회전수를 바꾸어 레이놀즈수 변화에 따른 특성을 살펴보았으며 날개끝속도비(TSR)별로 비교 검토 하였다. 본 연구에서 제안된 레이크 임펠러의 성능이 기존 임펠러 보다 우수함을 확인 하였으며 추후 실험시설을 보완하여 보다 큰 레이놀즈수에서 실험을 수행하고 계산과 비교할 예정이다.

• 대한물리치료과학회지
• /
• 제20권1호
• /
• pp.61-67
• /
• 2013

Purpose : The purpose of this paper is to figure out the effects of the Powerball exercise on grip strength, tip pinch and key pinch. Methods : Twenty subjects participated in this experiment. Spin right wrist counterclockwise for five minutes holding Powerball after making main joint of right hand -predominant hand- into elbow flexion and forearm pronation. Results : 1. Before and after Powerball exercise, when we compared the grip strength of men and women, there was a significant difference. 2. Before and after Powerball exercise, when we compared tip pinch of men and women, there was a significant difference. 3. Before and after Powerball exercise, when we compared key pinch of men and women, there was a significant difference. 4. Before and after Powerball exercise, there was no significant difference between men and women. Conclusion : From what using Powerball exercise influenced grip strength, tip pinch and key pinch positively, we assume that it will be considered a great expectation to improve grip strength, tip pinch and key pinch in the future and it would be better to conduct this experiment in depth to a lot of people.