• 제목/요약/키워드: Tip-in/out

검색결과 662건 처리시간 0.028초

황(黃)라왕재(Shorea spp.)의 모드 I, 모드 II 및 혼합(混合)모드 하중시(荷重時) 파괴기준(破壞基準)에 관(關)한 연구(硏究) (Studies on Fracture Criterion in Yellow Lauan(Shorea spp.) under Mode I, Mode II and Mixed Mode Loading)

  • 심국보;이전제;정희석
    • Journal of the Korean Wood Science and Technology
    • /
    • 제20권2호
    • /
    • pp.61-72
    • /
    • 1992
  • This study was carried out to investigate the fracture behavior and the fracture criterion of yellow lauan(Shorea spp.), when has used for furniture and wood structures, and to offer a reliability for wood structure and basic data for wood fracture criterion in experiments which are fracture tested under mode I, mode II and mixed mode loading condition. The results were summarized as follows; 1. Fractures in specimens which have inclined grain in yellow lauan procedeed from crack tip in the radial direction along the grain. 2. In yellow lauan, $K_{IC}RL$ was 42.1kg/$cm^{3/2}$ and $K_{IIC}RL$ was 15.8kg/$cm^{3/2}$. 3. The fracture criteria of lauan were; ($K_I/K_{IC}$)+($K_{II}/K_{IIC}$)=1 in RL system with inclined grain at $45^{\circ}$, ($K_I/K_{IC}$)+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $15^{\circ}$ and $(K_I/K_{IC})^2$+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $30^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$, respectively. 4. The fracture criterion of wood could vary with the species, and the load applying condition. In order to measure the fracture criterion strictly, along with standardization of specimen geometry a large amount of experimental data is needed. 5. $K_{IC}$(critical stress intensity factor) can be predicted by grain angle. As the grain inclined angle increased, $K_{IC}$ and $K_{IIC}$ are increased.

  • PDF

Performance of laterally loaded piles considering soil and interface parameters

  • Fatahi, Behzad;Basack, Sudip;Ryan, Patrick;Zhou, Wan-Huan;Khabbaz, Hadi
    • Geomechanics and Engineering
    • /
    • 제7권5호
    • /
    • pp.495-524
    • /
    • 2014
  • To investigate the soil-pile interactive performance under lateral loads, a set of laboratory model tests was conducted on remoulded test bed of soft clay and medium dense sand. Then, a simplified boundary element analysis had been carried out assuming floating pile. In case of soft clay, it has been observed that lateral loads on piles can initiate the formation of a gap, soil heave and the tension crack in the vicinity of the soil surface and the interface, whereas in medium dense sand, a semi-elliptical depression zone can develop. Comparison of test and boundary element results indicates the accuracy of the solution developed. However, in the boundary element analysis, the possible shear stresses likely to be developed at the interface are ignored in order to simplify the existing complex equations. Moreover, it is unable to capture the influence of base restraint in case of a socketed pile. To bridge up this gap and to study the influence of the initial stress state and interface parameters, a field based case-study of laterally-loaded pile in layered soil with socketed tip is explored and modelled using the finite element method. The results of the model have been verified against known field measurements from a case-study. Parametric studies have been conducted to investigate the influence of the coefficient of lateral earth pressure and the interface strength reduction factor on the results of the model.

Standardization of the Important Test Parameters in the Solder Ball Shear Test for Evaluation of the Mechanical Joint Strength

  • Kim J. W.;Koo J. M.;Lee W. B.;Moon W. C.;Moon J. H.;Yeon Y. M.;Shur C. C.;Jung S. B.
    • International Journal of Korean Welding Society
    • /
    • 제5권1호
    • /
    • pp.15-28
    • /
    • 2005
  • The ball shear test was investigated in terms of the effects of test parameters, i.e., shear height and shear speed, with an experimental and non-linear finite element analysis for evaluating the solder joint integrity of area array packages. Two representative Pb-free solder compositions were examined in this work: Sn-3.5Ag-0.75Cu and In-48Sn. The substrate was a common SMD type with solder bond pad openings of 460 $\mu$m in diameter. The microstructural investigations were carried out using SEM, and the IMCs were identified with EDS. Shear tests were conducted with the two varying test parameters. It could be observed that increasing shear height, at fixed shear speed, has the effect of decreasing shear force for both Sn-3.5Ag-0.75Cu and In-48Sn solder joints, while the shear force increased with increasing shear speed at fixed shear height. Too high shear height could cause some undesirable effects on the test results such as unexpected high standard deviation values or shear tip sliding from the solder ball. The low shear height conditions were favorable for screening the type of brittle interfacial fractures or the degraded layers in the interfaces. The shear speed conditions were discussed with the stress analyses of the solder ball, and we cannot find any conspicuous finding which is related to optimum shear speed from the stress analyses.

  • PDF

"동천오지(洞天奧旨)"에 관한 소고(小考) (A Study on "Dongchunohji(洞天奧旨)")

  • 김기욱;박현국
    • 대한한의학원전학회지
    • /
    • 제22권2호
    • /
    • pp.85-99
    • /
    • 2009
  • This book was completed in the 33rd year of Gang-hui-gapsul(康熙 甲戌) in the Cheong(淸) dynasty(1694), and was first inscribed in the 55th year of Geonryung(乾隆). In this first edition named 'Daechudangbon(大雅堂本)', his descendant Jinbonghui(陳鳳輝) wrote the postscript. There are also other editions such as 'Ga-gyeong-ganchwihyeondangbon(嘉慶間聚賢堂本)', 'Wimundanggeonsangbon(緯文堂巾箱本)' and 'Guangseo-ganseonseongdangbon(光緒間善成堂本)' Second, this book was called "Oe-gwabirok(外科秘錄)" and used the pen name 'Gibaekchunsasojeon(岐伯天師所傳)'. There are 16 volumes in total. The beginning of volume one, is a drawing of the 14 meridians. Volumes 1$\sim$4 are on the symptoms and treatment of abscesses and sores and ulcers[癰疽瘡瘍]. Volumes 5$\sim$13 are on surgery, dermatology and 156 diseases such as wounds by contusion, sharp objects and insects and beasts[跌撲, 金刃, 蟲獸傷]. Volumes 14$\sim$16 list the internal treatments, external medicine, acupuncture and moxibustion and surgery of sores and ulcers. Third, the book stressed early detection and treatment of diseases, emphasized inner resolving[內消] being cautious about using medicine, and further deepened the syndrome differentiation and treatment[辨證施治] of sores and ulcers[瘡瘍] by dividing fire toxin(火毒) into Eumhwa and Yanghwa(陰火/陽火). Also, it established the cause of sores and ulcers development as the deficiency of Gi(氣) and blood[血] and focused especially on the liver and kidney's involvement in the process. It also asserted that the pathogen[邪] is the tip[標], so one should eliminate and reinforce[攻補] to balance it out. The sore and ulcer surgery[瘡瘍外科] part is mostly based on detoxifying[解毒] and resolving[消散]. Although the meridians were mentioned, they were not emphasized, while moxibustion treatment of sores and ulcers[瘡瘍] were thoroughly analyzed. Also, of all 550 formulas in this book, 90% are experience-based which frequently use Geum-eunhwa(金銀花), Pogong-yeong(蒲公英) and Jahwajijeong(紫花地丁). The usages are unique, and the formulas have good adaptability. The symptoms of the diseases are explained first, followed by according main and sub treatments.

  • PDF

벼와 콩의 오존 피해증상과 품종간 차이 (Symptom of Leaf Injury and Varietal Difference to Ozone in Rice and Soybean Plant)

  • 이종태;손재근
    • 한국환경농학회지
    • /
    • 제19권2호
    • /
    • pp.154-159
    • /
    • 2000
  • 대기환경오염원인 오존을 벼와 콩에 처리하여 오존피해증상, 품종간 저항성 차이 및 유전양상을 밝히고자 가시피해, 피해엽율, 엽록소함량, 임실율 등을 조사한 결과를 요약하면 다음과 같다. 벼의 오존피해증상은 피해정도에 따라 잎에 작고 붉은 반점이 형성되거나 잎전체가 적갈색 또는 황백색으로 변색되며 잎끝부터 말리면서 고사하였다. 콩은 피해엽이 황백색 또는 흑갈색으로 변색되었으며 벼와 콩 모두 잎의 표면보다는 이면이, 신엽보다는 하위엽에서 뚜렷하게 나타났다. 벼의 오존저항성 정도는 밀양 23호와 농안벼가 저항성을, 추청벼가 감수성으로 조사되었다. 오존처리시간이 2시간에서 8시간으로 길어짐에 따라 벼의 피해엽율은 증가하였고 엽록소함량은 감소하는 경향이었지만 그 정도는 품종에 따라 다르게 나타났다. 콩의 품종별 오존저항성정도는 큰올콩과 단엽콩이 저항성을, 두유콩, 무한콩, 은하콩 및 푸른콩 등이 감수성으로 나타났다. 콩의 생육시기별 피해엽율은 품종에 따라 다소 다른 경향이었으나 대체로 파종후 45일 처리에서 피해엽율이 가장 높았다.

  • PDF

뇌졸중 환자의 장애 특성에 따른 접촉 감각 자극이 두점 구별, 손 기능 및 일상생활수행력에 미치는 효과 (The Effect of Tactile Stimulation on Two Point Discrimination, Hand Function, and ADL in Impaired Characteristics of Stroke Patient)

  • 송보경
    • 대한물리의학회지
    • /
    • 제7권4호
    • /
    • pp.481-491
    • /
    • 2012
  • PURPOSE: This study find out the effect of improved two point discrimination (TPD), hand function and activities of daily living (ADL) performance through tactile stimulus of upper limb (U/L) in impaired characteristics of stroke METHODS: We selected 26 stroke patients in BMH who has problems with neglect, sensory and motor deficits. Patients were divided into 3 group with neglect group (NG), sensorimotor deficits group (SMG) and motor deficit group (MG). To compare each group we used assessment tools such as two point discrimination on affected side (TPDas) and unaffected side (TPDus), Manual functional test on affected side (MFTas) and unaffected side (MFTus) and Korean version modified barthel index (K-MBI). RESULTS: 1) In the NG, tactile stimulus on U/L was statistically important for TPDas (forearm, index finger tip) also SMG and MDG was statistically important for TPDas. 2) In the NG, SMG, there was statistically important for MFTas, MFTus and in the MG. K-MBI also was statistically importance. Among three group, there was an statistically important difference for TPTus (forearm, thenar, hypothenar), MFTas and MFTus. We analyzed the relationship among TPD, MFT and K-MBI and There was negative relationship between TPD, MFT and There was positive relationship between TPD and K-MBI CONCLUSION: In impaired characteristics of stroke patients, tactile stimulus on U/L influenced on two point discrimination, hand function and ADL's. And we also found relationship among somatosensory, hand function, and ADL performance.

구리광산에 적용된 부분단면굴착기용 국산 코니컬 픽커터의 성능평가 연구 (Performance Evaluation of Conical Picks for Roadheader in Copper Mines)

  • 최순욱;장수호;이철호;이규필;배영환;하태욱
    • 터널과지하공간
    • /
    • 제25권6호
    • /
    • pp.496-504
    • /
    • 2015
  • 로드헤더는 커팅헤드에 픽커터를 설치하여 지반을 굴착하는 장비이다. 픽커터는 일반적으로 코니컬타입을 사용하며, 코니컬 픽커터는 선단부에 마모에 강한 텅스텐카바이드 팁을 사용하여 커터의 소모를 감소시키는 굴착 도구이다. 본 연구에서는 구리광산의 망토와 역암으로 구성된 복합지반을 대상으로 로드헤더 커팅헤드에 3종류의 코니컬 픽커터를 사용하여 내구성능을 살펴보았다. 현장적용 후, 픽커터의 육안조사와 중량감소율 측정, 그리고 CT 및 SEM을 이용한 내 외부 균열조사를 수행한 결과, 하드페이싱으로 보강한 코니컬 픽커터의 내구성능이 가장 우수하였으며, 각 코니컬 픽커터의 내 외부에서는 현장적용 전과 후 모두에서 매크로 크랙 및 미세균열을 발견할 수 없었다.

평판에서 압전 세라믹 액추에이터에 의한 유동제어 (Flow Control by Piezoceramic Actuator in a flat plate)

  • 김동하;한종섭;장조원;김학봉
    • 한국항공우주학회지
    • /
    • 제37권11호
    • /
    • pp.1080-1088
    • /
    • 2009
  • 평판 유동에서 유동을 제어하기 위하여 압전 세라믹을 이용한 액추에이터가 설계되었다. 액추에이터가 15Hz의 낮은 가진 주파수로 구동할 때, 설계된 액추에이터에 의해 발생된 유동 교란을 알아보기 위해 경계층 측정이 수행되었다. 경계층에서의 평균 유동속도와 섭동량이 액추에이터 끝단에서 $x/{\delta}^*=31.9$ 떨어진 하류위치에서 1축 열선프로브(55P14)로 측정되었다. 측정 결과, 속도가 느린 영역과 빠른 영역이 각각 액추에이터의 중심부근 및 바깥부분에서 관찰되었으며, 이것으로 서로 마주보며 회전하는 한 쌍의 유동방향 와류의 발생이 예측되었다. 섭동량은 액추에이터의 바깥부분에서 크게 나타났으며, 벽면근처에서 유동방향 속도의 스팬방향 변화에서 변곡점이 관찰되었다. 액추에이터가 낮은 주파수에서 구동하는 경우에는 경계층 불안정성이 액추에이터의 가진 주파수와 T-S 파동에 해당하는 주파수에서 함께 증폭된다.

폴리카보네이트/폴리에스터카보네이트 블렌드의 파괴 거동 (Fracture Behavior of Polycarbonate/Polyestercarbonate Blends)

  • 이용범;이춘수;김대식;김종현;조재영;이상수
    • 폴리머
    • /
    • 제35권6호
    • /
    • pp.537-542
    • /
    • 2011
  • 폴리카보네이트(PC)에서 문제되는, 내충격성에서의 취약한 두께민감성을 보완하고자, PC와 구조적 유사성을 지니며 내충격성에서의 두께민감성은 보완된 폴리에스터카보네이트(PEC)와 PC의 블렌드를 제조하였다. 다양한 조성의 PEC를 합성하여 PC/PEC 블렌드의 $T_g$를 측정한 결과, 카보네이트 구조의 함량이 10 mol% 정도로 적은 경우를 제외한 모든 PEC가 PC와 상용성을 보였으며, 그 중 카보네이트 단위와 방향족 에스터인 아릴레이트 단위의 함량비가 1:1인 PEC5와 PC의 블렌드에 대해 파괴 거동을 고찰한 결과, 3 mm 두께 시편에서는 PEC5의 함량이 증가함에 따라 충격강도가 낮아졌으나, 이보다 두꺼운 6 mm 시편에서는 PEC5 함량이 많은 조성에서 PC와 PEC5 각각 보다 향상된 충격강도 결과가 발견되었다.

상지(上肢) 외전위(外轉位)에서 시행(施行)한 쇄골상(鎖骨上) 상완신경총차단(上腕神經叢遮斷) (Supraclavicular Brachial Plexus block with Arm-Hyperabduction)

  • 임권;임화택;김동권;박오;김성열;오흥근
    • The Korean Journal of Pain
    • /
    • 제1권2호
    • /
    • pp.214-222
    • /
    • 1988
  • With the arm in hyperabduction, we have carried out 525 procedures of supraclavicular brachial plexus block from Aug. 1976 to June 1980, whereas block with the arm in adduction has been customarily performed by other authors. The anesthetic procedure is as follows: 1) The patient lies in the dorsal recumbent position without a pillow under his head or shoulder. His arm is hyperabducted more than a 90 degree angle from his side, and his head is turned to the side opposite from that to be blocked. 2) An "X" is marked at a point 1 cm above the mid clavicle, immediately lateral to the edge of the anterior scalene muscle, and on the palpable portion of the subclavian artery. The area is aseptically prepared and draped. 3) A 22 gauge 3.5cm needle attached to a syringe filled with 2% lidocaine (7~8mg/kg of body weight) and epineprine(1 : 200,000) is inserted caudally toward the second portion of the artery where it crosses the first rib and parallel with the lateral border of the muscle until a paresthesia is obtained. 4) Paresthesia is usually elicited while inserting the needle tip about 1~2 em in depth. If so, the local anesthetic solution is injected after careful aspiration. 5) If no paresthesia is elicited, the needle is withdrawn and redirected in an attempt to elicit paresthesia. 6) If, after several attempts, no paresthesia is obtained, the local anesthetic solution is injected into the perivascular sheath after confirming that the artery is not punctured. 7) Immediately after starting surgery, Valium is injected for sedation by the intravenous route in almost all cases. The age distribution of the cases was from 11 to 80 years. Sex distribution was 476 males and 49 females (Table 1). Operative procedures consisted of 103 open reductions, 114 skin grafts combined with spinal anesthesia in 14, 87 debridements, 75 repairs, i.e. tendon (41), nerve(32), and artery (2), 58 corrections of abnormalities, 27 amputations above the elbow (5), below the elbow (3) and fingers (17), 20 primary closures, 18 incisions and curettages, 2 replantations of cut fingers. respectively (Table 2). Paresthesia was obtained in all cases. Onset of analgesia occured within 5 minutes, starting in the deltoid region in almost all cases. Complete anesthesia of the entire arm appeared within 10 minutes but was delayed 15 to 20 minutes in 5 cases and failed in one case. Thus, our success rate was nearly 100%. The duration of anesthesia after a single injection ranged from $3\frac{1}{2}$ to $4\frac{1}{2}$, hours in 94% of the cases. The operative time ranged from 0.5 to 4 hours in 92.4% of the cases(Table 3). Repeat blocks were carried out in 33 cases when operative times which were more than 4 hours in 22 cases and the others were completed within 4 hours (Table 4). Two patients of the 33 cases, who received microvasular surgery were injected twice with 2% lidocaine 20 ml for a total of $13\frac{1}{2}$ hours. The 157 patients who received surgery on the forearms or hands had pneumatic tourniquets (250 torrs) applied without tourniquet pain. There was no pneumothorax, hematoma or phrenic nerve paralysis in any of the unilateral and 27 bilateral blocks, but there was hoarseness in two, Horner's syndrome in 11 and shivering in 7 cases. No general seizures or other side effects were observed. By 20ml of 60% urcgratin study, we confirm ed the position of the needle tip to be in a safer position when the arm is in hyperabduction than when it is in adduction. And also that the humoral head caused some obstraction of the distal flow of the dye, indicating that less local anesthetic solution would be needed for satisfactory anesthesia. (Fig. 3,4).

  • PDF