• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.368-375
• /
• 2021

The performance time of human operators has been recognized as a key aspect of human reliability in socio-complex systems, including nuclear industries. Because of the importance of the time factor, most existing human reliability assessment methods provide ways to quantify human error probabilities (HEPs) that are associated with the performance time. To quantify such kinds of HEPs, it is crucial to rationally predict the length of time required and time available and compare them. However, there have not been detailed guidelines that identify the critical cue presentation time or initial time of human performance, which is important to calculate the time information. In this paper, we introduce a time-related HEP calculation technique with a decision algorithm that determines the critical cue and its timing. The calculation process is presented with the application examples. It is expected that the proposed algorithm will reduce the variability in the time-related reliability assessment and strengthen the scientific evidence of the assessment process. The detailed description is provided in the technical report KAERI/TR-7607/2019.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.27-36
• /
• 2018

The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2008

The purpose of this study was to investigate kinematic coordination and control of lower segments in skill process. For the investigation, we examined the difference of resultant linear velocity of segments and angle vs angle graph. Novice subjects were 9 male middle school students who has never been experienced a taekwondo and expert subjects were 7 university taekwondo players. We analyzed kinematic variables of Dollyochagi motion through videographical analysis and the conclusion were as follows. 1. Examining the graph of novice subjects' maximal resultant linear velocity of the thigh, shank, and foot segment, as it gets closer to the end of the training, the maximal resultant linear velocity in each segment increased. Statistical analysis showed the following results; thigh segment caused the increase of speed, using the trunk segment's momentum in the latter term of learning, while the shank segment utilized the momentum of the adjacent proximal segment at the beginning of learning, and the foot segment in the middle of learning. 2. Until the point where the knee joint angle is minimum, as the novice group learn the skill, the flexion of knee and hip joints has changed into the form of coordination pattern in phase. On the other hand, the expert group showed continual coordination pattern in phase that the movement sequences were smooth. From the knee joint maximal flexion to impact timing, all novice and expert groups showed coordination pattern out of phase. 3. From the knee joint maximal flexion to impact timing, the ankle joint was fixed and the knee joint was extended to all the novice stages and expert subjects.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.5
• /
• pp.492-497
• /
• 2016

Objective : Decompressive craniectomy is an effective therapy to relieve high intracranial pressure after acute brain damage. However, the optimal timing for cranioplasty after decompression is still controversial. Many authors reported that early cranioplasty may contribute to improve the cerebral blood flow and brain metabolism. However, despite all the advantages, there always remains a concern that early cranioplasty may increase the chance of infection. The purpose of this retrospective study is to investigate whether the early cranioplasty increase the infection rate. We also evaluated the risk factors of infection following cranioplasty. Methods : We retrospectively examined the results of 131 patients who underwent cranioplasty in our institution between January 2008 and June 2015. We divided them into early (${\leq}90days$) and late (>90 days after craniectomy) groups. We examined the risk factors of infection after cranioplasty. We analyzed the infection rate between two groups. Results : There were more male patients (62%) than female (38%). The mean age was 49 years. Infection occurred in 17 patients (13%) after cranioplasty. The infection rate of early cranioplasty was lower than that of late cranioplasty (7% vs. 20%; p=0.02). Early cranioplasty, non-metal allograft materials, re-operation before cranioplasty and younger age were the significant factors in the infection rate after cranioplasty (p<0.05). Especially allograft was a significant risk factor of infection (odds ratio, 12.4; 95% confidence interval, 3.24-47.33; p<0.01). Younger age was also a significant risk factor of infection after cranioplasty by multivariable analysis (odds ratio, 0.96; 95% confidence interval, 0.96-0.99; p=0.02). Conclusion : Early cranioplasty did not increase the infection rate in this study. The use of non-metal allograft materials influenced a more important role in infection in cranioplasty. Actually, timing itself was not a significant risk factor in multivariate analysis. So the early cranioplasty may bring better outcomes in cognitive functions or wound without raising the infection rate.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2008

Quality attributes of welsh onion (Allium fistulosum L.) as affected by harvest timing (November, December 2006 and January 2007) and storage temperature (5, 10 and $20^{\circ}C$) were investigated in terms of respiration rate, weight loss, decay rate, color, hardness, sensory quality. A higher respiration rate was found when welsh onions were harvested later and storage temperature was higher. A smaller weight loss was observed in welsh onions that were harvested in November and stored at temperature of $5^{\circ}C$, demonstrating a 9.35% reduction. In other words, there were a minimum difference of 2.15% and a maximum difference of 9.92% between the weight loss in test samples harvested in November and those of test samples harvested in other months. The decay rate was higher in welsh onions harvested in January. The degree of color was more stable in test samples kept at temperature of $5^{\circ}C$ than those kept at higher temperature (10 and $20^{\circ}C$). There were, however, no significant differences in color changes among test samples harvested at different times of the year. Thus color change is closely associated with temperature. Also, welsh onions were harvested in November and stored at temperature of $5^{\circ}C$ showed a good sensory quality.

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.365-373
• /
• 2006

This study suggested correction of excessive mouth opening or maximum occlusal contact to analyse occlusal contact time, occlusal contact number and force through evaluation of occlusal pattern in policemen with temporomandibular disorders. The community of policemen influence on temporomandibular disorder's development and progress due to other condition of mouth opening and maximal occlusal contact. Repeated training or changes of usual life style may cause imbalance of stomatognathic system including the masticatory muscle, then develop or aggravate pain of temporomandibular joints and associated structures. This study uses T-scan II system(Tekscan Co., USA) for evaluation on occlusal pattern may influence temporomandibular disorders, and then the subjects take a sensor at 20 mm opening for maximal occlusal contact force. The policemen with temporomandibualr disorders get more long time on maximum contact timing, more short on end contact timing, and more force on end contact force than general society's. So they get closure of mouth with more short time and more force, then transfer remaining load to temporomandibular joint. There are no statistically significances between affected side and occlusal pattern of occlusal contact time and force. There are Left -right dental arch imbalances seems on Rt. dental arch if affected side is right and Lt. dental arch if affected side is left. In above results, It's worth due consideration that policemen with temporomandibular disorders get more smooth mandibualr movement and less force on maximal occlusal contact position.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2015

This study is an 1-D numerical study prior to modification of diesel engine for power plants to natural gas/diesel dual fuel engine using GT-Power with 1.5MW diesel engine for power generation. Natural gas injector was installed to intake manifold for dual fuel engine model. Effects on engine performance and characteristics were investigated when dual fuel is used in unmodified diesel engine. The analysis was done under 5 conditions from 0% to 40% of mixing rate on 720RPM engine speed. As a result of research, the engine performance was decreased as increasing ratio of natural gas. Engine brake power was decreased by 18.4% under 40% mixing rate condition. To clarify the reason, effects of injection timing and period were evaluated with DOE method. Considering this result, optimization was done for these parameters. Also, comparison between performances of dual fueled engine and diesel engine was made after optimizing the timing of injection by DOE method. As a result, engine brake power was decreased by 8.55% under mixing rate 40% condition showing 12.5% improvement.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.2
• /
• pp.182-195
• /
• 2023

The purpose of this study was to analyze reports from research middle schools based on the criteria for process-focused assessment to find out how the characteristics of process-focused assessment were being implemented in middle school science classes. The analysis criteria for the characteristics of process-focused assessment (integration of lessons and assessments, evaluation elements and methods, content and timing of feedback, and learner growth management) were extracted. Using the analysis framework, the result reports of seven research middle schools for process-focused assessment were analyzed. In terms of integration of lessons and assessments, when the process-focused assessment was operated, the class and evaluation plan were well implemented based on the curriculum achievement standards, but the process-focused assessment was recognized as a performance evaluation. In terms of evaluation elements and methods, the evaluation element for knowledge was the main component, and competency was presented in the planning stage, but competency was not dealt with in class execution. The evaluation method was biased toward teacher-centered observation evaluation and written test, and the setting of scoring criteria for each evaluation element was insufficient. In terms of the content and timing of feedback, feedback was mainly provided based on achievement confirmation, but no case was found in which scaffolding was provided at an appropriate time for insufficient parts in the learning process. In terms of the learner's growth management, the competencies cultivated through science classes were included in the detailed subject specialties of the school record. However, little was shown in the report on how to systematically manage the process of developing learners' competencies and reflect the evaluation results to teachers' class improvement.

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.107-126
• /
• 2023

This study analyzes the financial efficiency of the early scappage support system using the benefit and cost analysis. To do so, we use comprehensive administrative data on the early scrappage of old diesel vehicles. The result shows that the benefit-cost ratio was greater than 1 before 2020, but it appeared to be less than 1 after 2020. This indicates that despite recent reforms to increase the subsidy of early scrappage of old diesel vehicles, the rate of the benefit of air quality improvement is not as fast as the increase in system operation cost of this system. The benefit of air quality improvement depends on how much the operating period is shortened due to early scrappage support system. The earlier this period is brought forward, the more likely it is that the benefits of early scrappage will exceed the costs. Upon examining the results of this study, it was found that when the scrappage timing is brought forward by 5 years, the B/C for 98% of the samples becomes 1, greatly securing financial efficiency. Therefore, it is important for the government to reform the system so that it can influence the decision of old diesel vehicle owners on the timing of scrappage.

• Communications of Mathematical Education
• /
• v.37 no.4
• /
• pp.635-652
• /
• 2023

This study conducts a comprehensive analysis of the curricular progression of the concepts and learning sequences of 'lines', specifically, 'line segments', 'straight lines', and 'rays', at the elementary school level. By examining mathematics curricula and textbooks, spanning from 2nd to 7th and 2007, 2009, 2015, and up to 2022 revised version, the study investigates the timing and methods of introducing these essential geometric concepts. It also explores the sequential delivery of instruction and the key focal points of pedagogy. Through the analysis of shifts in the timing and definitions, it becomes evident that these concepts of lines have predominantly been integrated as integral components of two-dimensional plane figures. This includes their role in defining the sides of polygons and the angles formed by lines. This perspective underscores the importance of providing ample opportunities for students to explore these basic geometric entities. Furthermore, the definitions of line segments, straight lines, and rays, their interrelations with points, and the relationships established between different types of lines significantly influence the development of these core concepts. Lastly, the study emphasizes the significance of introducing fundamental mathematical concepts, such as the notion of straight lines as the shortest distance in line segments and the concept of lines extending infinitely (infiniteness) in straight lines and rays. These ideas serve as foundational elements of mathematical thinking, emphasizing the necessity for students to grasp concretely these concepts through visualization and experiences in their daily surroundings. This progression aligns with a shift towards the comprehension of Euclidean geometry. This research suggests a comprehensive reassessment of how line concepts are introduced and taught, with a particular focus on connecting real-life exploratory experiences to the foundational principles of geometry, thereby enhancing the quality of mathematics education.