• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.376-380
• /
• 1987

The closed-loop transfer function of 2-nd order PLL (phase-looked loop)of which loop filter has active-lag 1-st order is found. Considering the three criteria of system performance: the transient response time of the circuit, noise bandwidth by the linear analysis and stability which uses root-locus method, the optimum value of damping factor is 1.0 and the natural frequency which depends upon the signal frequency can be determined after consideration of the trade-off relationship between the transient response time and the noise bandwidth.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2743-2759
• /
• 2020

A detailed computational fluid dynamics (CFD) simulation analysis model was developed using ANSYS CFX 16.1 and analyzed to simulate the basic design and internal flow characteristics of a 180 MW small modular reactor (SMR) with a natural circulation flow system. To analyze the natural circulation phenomena without a pump for the initial flow generation inside the reactor, the flow characteristics were evaluated for each output assuming various initial powers relative to the critical condition. The eddy phenomenon and the flow imbalance phenomenon at each output were confirmed, and a flow leveling structure under the core was proposed for an optimization of the internal natural circulation flow. In the steady-state analysis, the temperature distribution and heat transfer speed at each position considering an increase in the output power of the core were calculated, and the conceptual design of the SMR had a sufficient thermal margin (31.4 K). A transient model with the output ranging from 0% to 100% was analyzed, and the obtained values were close to the T_hot and T_cold temperature difference value estimated in the conceptual design of the SMR. The K-factor was calculated from the flow analysis data of the CFX model and applied to an analysis model in RELAP5/MOD3.3, the optimal analysis system code for nuclear power plants. The CFX analysis results and RELAP analysis results were evaluated in terms of the internal flow characteristics per core output. The two codes, which model the same nuclear power plant, have different flow analysis schemes but can be used complementarily. In particular, it will be useful to carry out detailed studies of the timing of the steam generator intervention when an SMR is activated. The thermal and hydraulic characteristics of the models that applied porous media to the core & steam generators and the models that embodied the entire detail shape were compared and analyzed. Although there were differences in the ability to analyze detailed flow characteristics at some low powers, it was confirmed that there was no significant difference in the thermal hydraulic characteristics' analysis of the SMR system's conceptual design.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.357-369
• /
• 2003

Electromagnetic valve (EMV) actuation system is a new technology for improving fuel efficiency and at the same time reducing omissions in internal combustion engines. It can provide more flexibility in valve event control compared with conventional variable valve actuation devices. The electromagnetic valve actuator must be designed by taking the operating conditions and engine geometry limits of the internal combustion engine into account. To help develop a simple design method, this paper presents a procedure for determine the basic design parameters and dimensions of the actuator from the relations of the valve dynamics, electromagnetic circuit and thermal loading condition based on the lumped method. To verify the accuracy of the lumped method analysis, experimental study is also carried out on a prototype actuator. It is found that there is a relatively good agreement between the experimental data and the results of the proposed design procedure. Through the whole speed range, the actuator maintains proper performances in valve timing and event control.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.825-835
• /
• 2012

This study for the development of water purification Artificial floating island maximizing domestic Artificial floating island patent trends and product development, according to the timing of patent registration was analyzed for trends. In addition, domestic invention patent technology Artificial floating island typed according to the purpose and characteristics of domestic patents were Artificial Floating Island. In particular, domestic leisure space with a growing population and the need for securing emerging role as a reservoir of water only in the past, who do appeal as a tourist destination or as an ecological space utilized, and accordingly will transform and the need to secure a hydrophilic, degrade water quality problems using this aquatic environment (water acquisition and hydrophilic), the requirements are a big obstacle is the reality factor. This patented product differentiation strategy through the analysis of the development of technology progressiveness (Field Application) in terms of water quality improvement and maintenance side, and the hydrophilic side scenery, ecological restoration aspects, and applicability to the field and taking into account existing technology economic aspects of distinction were presented and advertised a lot in terms of cost compared to other techniques without the use of highly efficient methodology for building a water purification and also appears identity appeal, wetlands, rivers, etc. can be applied broadly technician widespread deployment and installation time to less simple and more are expected to spread.

• 음성과학
• /
• 제14권1호
• /
• pp.121-135
• /
• 2007

The purpose of this paper is to examine how Korean speakers realize English stress and rhythm at the sentence level, and investigate what different acoustic characteristics of English sentence stress and rhythm Korean speakers have, compared with those of American English speakers. Stressed words in the sentence were analyzed in terms of duration, fundamental frequency, and intensity of the stressed vowel in the word with neutral stress and with emphatic stress, respectively. According to the results, when the words had emphatic stress, both Koreans' and Americans' F0 and intensity of the stressed vowel were higher than those with neutral stress. Korean speakers of English realized the sentence stress with shorter vowel duration and higher F0 than American English speakers when the words had emphatic stress. The analysis of the timing of the sentence with increased unstressed syllables showed that both Americans and Koreans produced the sentence with longer duration as the number of unstressed syllables increased. However, the duration of unstressed syllables between stressed syllables by Koreans was longer than that by Americans. Americans seemed to produce unstressed syllables between stressed syllables faster than Koreans for regular intervals of stressed syllables. This analysis implies that if there are more unstressed syllables between stressed syllables, Koreans might produce unstressed syllables and the whole sentence with longer duration.

• 천문학회보
• /
• 제40권2호
• /
• pp.30.3-31
• /
• 2015

We present a kinematic analysis of 172 likely member galaxies of the Ursa Major Cluster. In order to understand the dynamical state of the cluster, we investigate the correlation of the cluster morphology with rotation, the velocity dispersion profile, and the rotation amplitude parallel to the global rotation direction. Both the minor axis and the rotation are very well-aligned with the global rotation axis in the outer region at half radius (> 0.5 $R_{max}$), but not in the inner region. The cluster exhibits low velocity dispersion and rotation amplitude profiles in the inner region, but higher in the outer. Both profiles exhibit outwardly increasing trends, suggesting an inside-out transfer of angular momentum of dark matter via violent relaxation, as revealed by a recent off-axis major-merging simulation. From Dressler-Schectman plots in the plane of galactic positions, and velocity versus position angle of galaxy, we are able to divide the Ursa Major Cluster into two substructures: Ursa Major South (UMS) and Ursa Major North (UMN). We derive a mass of $3.2{\times}10^{14}M_{\odot}$ for the cluster through the two-body analysis by the timing argument with the distance information (37 for UMN and 36 for UMS) and the spin parameter of ${\lambda}=0.049$. The two substructures appear to have passed each other 4.4 Gyr ago and are moving away to the maximum separation.

• 한국산업정보학회논문지
• /
• 제7권5호
• /
• pp.167-174
• /
• 2002

본 논문에서는 타원 곡선 암호화 시스템 등에 응용되는 유한 필드 GF(2$^{m}$ )상의 모듈러 곱셈기 및 제곱기에 대한 처리 시간과 공간 복잡도를 비교 분석하였다. 이를 위하여 기존에 제시된 모듈러 곱셈기 및 제곱기를 설계하였으며, 이들을 VHDL로 기술한 후 회로를 합성하였다. 합성된 회로에 대한 기능 및 timing 시뮬레이션 결과 모두 정확한 결과 값을 얻었다. 합성된 모듈러 곱셈기 및 제곱기를 FPGA로 구현한 결과 한 클럭당 처리 시간은 시스톨릭 구조가 가장 빠르지만 지연 시간을 고려한 전체 처리 시간은 CA 구조가 가장 빠르다는 결과를 얻었다. 또한 공간 복잡도를 특성에 있어서는 LFSR 구조가 가장 우수하다는 결과를 얻었다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.155-165
• /
• 2005

The purpose of this study was to compare the muscle activities of Double Legged Jump (DLJ) and Single Legged Jump (SLJ) by the normalization of muscle activity. Eight college students without the lower extremity injuries were selected as subjects for collecting EMG data of vastus medialis and gastrocnemius. The entire section of motion was established as eccentric and concentric contractions, and each of the contractions was divided into three sections with equal timing intervals, which becomes a total of 6 phases. The EMG data of each phase was integrated and normalized. The muscle activities of the vastus medialis for both eccentric and concentric contractions were significantly different between DLJ and SLJ(p<.05). The increase in overall muscle activity of SLJ was 33.6%. Approximately, there was an increase of 25.9% in eccentric contraction and 40% in concentric contraction. Moreover, the data of the muscle activity of gastrocnemius was similar to the data of the muscle activity of vastus medialis. In conclusion, this research suggests muscle activity of a certain motion can be normalized for an analysis of another motion.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.632-640
• /
• 2007

The low force estimation method of skeletal muscle was proposed by using ICA(independent component analysis) and neuro-transmission model. An EMG decomposition is the procedure by which the signal is classified into its constituent MUAP(motor unit action potential). The force index of electromyography was due to the generation of MUAP. To estimate low force, current analysis technique, such as RMS(root mean square) and MAV(mean absolute value), have not been shown to provide direct measures of the number and timing of motoneurons firing or their firing frequencies, but are used due to lack of other options. In this paper, the method based on ICA and chemical signal transmission mechanism from neuron to muscle was proposed. The force generation model consists of two linear, first-order low pass filters separated by a static non-linearity. The model takes a modulated IPI(inter pulse interval) as input and produces isometric force as output. Both the step and random train were applied to the neuro-transmission model. As a results, the ICA has shown remarkable enhancement by finding a hidden MAUP from the original superimposed EMG signal and estimating accurate IPI. And the proposed estimation technique shows good agreements with the low force measured comparing with RMS and MAV method to the input patterns.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.344-349
• /
• 2017

Suspension noise from under a passenger car is one of the important factors that impact the perceptual quality for drivers. However, it is difficult to validate this by component level testing in the early stage of development, because suspension noise caused by interaction of the related parts has been found at saleable vehicles late during development or at the manufacturing stage, when many customers have already filed for claims. This study proposed a validation testing under research by the DFSS process that enables reproduction of vehicle level noise by component level testing using a shock absorber with the related parts, such as urethane bumper and top mount. This study also developed a compromised test matrix while analyzing the noise factors through experimental design and analysis of variance to determine what factors can affect noise. Based on this study, we expect that the vehicle level and customer claim can be validated during initial development timing by a more reliable component noise validation test.