• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.341-345
• /
• 1996

This paper presents the dynamics and the teal-time control of a horizontally rotating inverted pendulum. The dynamic equations representing three degrees of freedom rigid body motion of the pendulum are derived, and the state feedback controller is applied to the motion control of the pendulum. A 32 bit counter board with 16 bit hardware communication ability is developed to improve the real-time control performance and is applied to a horizontally rotating inverted pendulum. The simulation and experimental studies are conducted to evaluate the performance of the developed pendulum system and the timing in the real-time control is analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.540-547
• /
• 2008

In this paper, we proposed a new VLSI architecture which can generate computer-generated hologram (CGH) in real-time and implemented to hardware. The modified algorithm for high-performance CGH was introduced and re-analyzed (or designing hardware. from both numerical and visual analysis, the infernal number system of hardware was decided. CGH algorithm and precision analysis enabled to propose a new cell architecture for CGH. The operational sequence was analyzed with the architecture of CGH cell and the characteristics of the modified CGH algorithm, and finally the pipelined architecture and the operational timing were proposed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.709-717
• /
• 2000

Cyclic variability has long been recognized as limiting the range of operating conditions of spark ignition engines, in particular, under lean and highly diluted operation conditions. The cyclic combustion variations can be characterized by the pressure parameters, combustion parameters, and flame front parameters. The coefficient of variation in indicated mean effective pressure ($COV_{IMEP}$) defines the cyclic variability in indicated work per cycle, and it has been found that vehicle driveability problems usually result when $COV_{IMEP}$ exceeds about 10%. For analysis of the cyclic variability in SI engines at idling, the results show that cyclic variability by the $COV_{IMEP}$ or the coefficient of variation in maximum pressure can be explained and may be consequently reduced by the help of the optimum spark timings.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.34-37
• /
• 2010

One dimensional transient analysis was studied for turbopump-fed liquid propellant rocket engine(LRE) system in starting using AMESim. The effects of timing of gas generator fuel valve opening and gas generator ignition to start-up stability were researched for open cycle type system using LOX/RP-1 to propellants. Result show that the parameters and sequence on start-up should be considered to design optimized turbopump-fed LRE system.

• Korean Journal of Geomatics
• /
• v.4 no.2
• /
• pp.47-52
• /
• 2004

We can process and compute the position, velocity and time by satellite signals of GPS. The signals are used to compute positioning of three dimensions and timing offset of the receiver clock when we can track the tour satellite signals at least. One of the specified aims is to use less expensive single frequency code/carrier phase GPS receivers, which are typically around half the price of dual frequency receivers. In the study, the author analyzed the accuracy and applicability of frequence linear combination using triangulation points evaluated distance limitation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.417-420
• /
• 2004

The Prestressed concrete girder bridges(PSC girder bridges), consisting of prestressed concrete girders and cast-in-place deck slabs, are sensitive to creep and shrinkage of concrete. Shrinkage and creep produce additional internal forces md deformations in PSC girder bridges. The long-term behavior of the PSC girder bridges depends on time-dependent properties of materials, amount of prestressing, methods and sequences of construction and age at loading. The purpose of this study is to predict the long-term behavior of PSC girder bridge. For this purpose, Computer program for Time-dependent analysis of PSC girder bridge has been developed. thereafter, Time-dependent analysis using developed computer program was carried out about 3-span continuous PSC girder bridges. Various construction timing sequences were used for parametric study.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.9
• /
• pp.535-541
• /
• 2003

Demand Side Management (DSM) activities have been designed to encourage customers to modify their patterns of electricity consumption including the timing and level of electricity demand. The role of DSM has been more and more important in the point of social energy utilization on the limited resources. The objectives of DSM are generally related to load reductions and generation cost savings. This paper presents an approach to B/C analysis to evaluate the impact of DSM programs especially on the strategic conservation and the load management programs. The proposed approach embedding the existing B/C analyses is applicable to the new electricity market. Case studies show the B/C ratio and the avoided cost due to the impact of DSM programs.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.610-612
• /
• 2004

실시간 시스템은 논리적 정확성뿐만 아니라 시간적 정확성을 요구한다. 시간적 정확성을 만족시키기 위해서 실시간 시스템의 설계자는 작업들의 스케줄 가능성에 대한 연구를 선행하여야 한다. 스케줄 가능성 분석을 위해 작업들에 대한 실행 시간 예측이 필요하다 작업들의 실행 시간 예측을 위한 방법으로 측정과 정적 분석이 연구되었다. 측정 및 정적 분석은 비용 및 막장성에 문제점을 지니고 있고 실시간 시스템의 발전을 따라가지 못하여 분석 결과의 정확성이 만족스럽지 못하다. 본 논문에서는 정적 분석을 단일 시스템이 아닌 분산 실시간 시스템에 적용할 수 있는 확장된 정적 분석 도구의 개발을 위해 분산 실시간 시스템으로 전환에 의해 발생되는 통신 영향 요소의 분석 및 통신 영향 요소 분석기를 설계한다. 실행 시간에 영향을 미치는 요소들의 분석을 통해 원시 프로그램에서 자동적으로 예측된 실행 시간의 정확도와 신뢰도를 높인다.

• Nuclear Engineering and Technology
• /
• v.35 no.4
• /
• pp.286-298
• /
• 2003

A steam explosion module, STX, has been developed using the mechanistic steam explosion analysis code, TEXAS-V, in order to estimate the dynamic load with steam explosion by implementing the module to the integrated safety analysis code, MELCOR. One of the difficulties in using mechanistic steam explosion codes is that they do not have any obvious criteria for defining some uncertain parameters such as triggering timing, triggering magnitude, mesh axial length and mesh cross-sectional area. These parameters have been user decision parts in the past. Steam explosion sample calculations and sensitivity studies on uncertain parameters were conducted to investigate those uncertain parameters. The TEXAS-V simulations were summarized in the format of a look-up table and a linear interpolation technique was adopted to calculate the steam explosion load between the data points in the table. The STX-module merged with MELCOR showed the same results as the original MELCOR and additionally it could estimate the steam explosion load in the reactor cavity.

• Korean Journal of Neurotrauma
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2017

Cranioplasty is an in evitable operation conducted after decompressive craniectomy (DC). The primary goals of cranioplasty after DC are to protect the brain, achieve a natural appearance and prevent sinking skin flap syndrome (or syndrome of the trephined). Furthermore, restoring patients' functional outcome and supplementing external defects helps patients improve their self-esteem. Although early cranioplasty is preferred in recent year, optimal timing for cranioplasty remains a controversial topic. Autologous bone flaps are the most ideal substitute for cranioplasty. Complications associated with cranioplasty are also variable, however, post-surgical infection is most common. Many new materials and techniques for cranioplasty are introduced. Cost-benefit analysis of these new materials and techniques can result in different outcomes from different healthcare systems.