• The Korean Journal of Food And Nutrition
• /
• v.14 no.6
• /
• pp.512-520
• /
• 2001

Kimchi is one of the traditional Korean food and a very popular side dish in Korea. To obtain funda mental data on how to prevent over ripening in kimchi after acidity of 0.4% was reached during the lactate fermentation, the physicochemical characteristics such as pH. acidity. organic acids, enzyme activity were measured and the time dependent ecology of microorganism were observed. In the initial stages of fermentation, the pH of kimchi was markedly changed and slowly decreased in 0.5% acidity The acidity was slowly increased and markedly increased in pH 4 by growth of microorganism. HPLC analysis showed oxalic acid, lactic acid, acetic acid, malic acid and succinic acid and this results reconfirmed by GC-MSD. Lactic acid was changed a lot during fermentation period as the time of storage went on, where as malic was decreased. Kimchi A, having acidity of 0.75%, showed the highest acidic Protease and lipase activity. Also, the amylase activity was high in kimchi C, having 0.95% acidity. The total viable bacteria showed 8.1$\times$10$^{5}$ , 4.7$\times$10$^4$, 1.2$\times$10$^3$, 3.2$\times$10$^4$, 4.9$\times$10$^{5}$ cfu/ml in the kimchi A, B, C, D and E, respectively. The numbers of lactic acid bacteria counted 1.0$\times$10$^{5}$ , 1.3$\times$10s, 1.2$\times$10$^3$, 2.3$\times$ 10$^3$, 2.1$\times$10$^4$c1u/m1 in the kimchi A, B, C, D and E, respectively. The numbers of acetobactor were counted 1.8$\times$10$^{5}$ , 9.3$\times$10$^4$, 7.0$\times$10$^1$, 4.5$\times$10$^4$, 5.3$\times$10$^3$cfu/m1 in the kimchi A, B, C, D and E, respectively.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.139-143
• /
• 2014

This study was conducted to investigate the effect of cultivation period and rockwool block size on the growth and early yield of paprika transplants grown in a closed transplant production system. Paprika seeds were sown and germinated in three different size of rockwool blocks ($45{\times}40{\times}35$, $70{\times}70{\times}60$, $100{\times}100{\times}65mm$) and cultivated in a closed transplant production system for 23, 30, and 37 days after sowing. Paprika transplants were cultivated using $100{\times}100{\times}65mm$ rockwool blocks in a greenhouse following a conventional and typical production method for comparing with the growth of paprika transplants grown in a closed transplant production system. Also, we transplanted paprika transplants grown for 23, 30, and 37 days in a closed transplant production system and greenhouse to rockwool slabs and investigated fresh weight of fruits and yield 125 days after sowing. The growth of paprika transplants grown in $70{\times}70{\times}60mm$ rockwool blocks in a closed transplant production system was highest, and the quality of paprika transplant grown in a closed transplant production system was better than in a greenhouse. Rockwool block size and cultivation period in a closed transplant production system did not affect fresh weight of fruits, however, yield was largest when paprika transplants were cultivated using $70{\times}70{\times}60$ and $100{\times}100{\times}65mm$ rockwool blocks for 23 days in a closed transplant production system. These results suggest that decreasing rockwool block size and cultivation period can be strategically used to enhance transplant quality and yield of paprika, as paprika transplants were cultivated in a closed transplant production system.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.465-472
• /
• 1993

The comparison of the capabilities of cell growth of four different kinds of commercially available microcarriers was carried out by culturing anchorage-dependent animal cells, Vero-6, in a spinner flask. Using 3 g/l of Cytodex 3, the maximum final cell density was about $1.4{\times}10^6$ cells/ml and increased up to $2.0{\times}10^6$ cells/ml by increasing microcarrier concentration up to 5 g/l. The macroporous collagen microcarriers, VX-100, informatrix, and Cultispher-G showed the final cell concentration of $4{\times}10^6$ cells/ml, $2.1{\times}10^6$ cells/ml, and $3.2{\times}10^6$ cells/ml, respectively at the microcarrier concentration of 5g/1. According to this result, VX-100 showed better cell growth than informatrix and cultispher-G and also showed about 2 fold increase in final cell density comparing to Cytodex 3 solid bead. When the intermittent bead-to-bead transfer technique was introduced in the culture using Cytodex 3 bead and cultispher-G, the result was very successful and the cells grew out very well. The recovered cells by dissolving collagen microcarrier using collagenase enzyme were mostly viable and grew out very well on the surface of the fresh microcarriers.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.219-225
• /
• 1998

This study was carried out to determine the optimum nodes of pinching and fruit setting in muskmelon cultured by deep flow technique. A fruit was set either at 7~8th, 11~12th, or 15~16th nodes, and main shoot was pinched either at 22nd or 27th node. Distance between rows was set the same at 100cm, while the distance between plant in the row was set at 25, 35, 45, or 55cm. In treatments with the same node of fruit setting, fruit quality was enhanced and mean fruit weight increased on 22nd node compared to 27th node. terms of fruit quality as affected by node of fruit setting, larger fruits with lower soluble solid concentrations were produced as fruits were set at higher nodes. In terms of planting density, larger fruits with higher concentrations of soluble solid were produced in the 100cm$\times$45cm and 100cm$\times$55cm treatments compared to 100cm$\times$25cm or 100cm$\times$35cm treatment. Total fruit yields decreased as the planting density decreased. However, percent marketable fruits produced was the greatest in the 100cm$\times$45cm treatment, followed in descending order 100cm$\times$25cm, 100cm$\times$35cm, and 100cm$\times$55cm treatments.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.638-643
• /
• 1994

The Si(ll1) surface structures induced by deposition of Au atoms were investigated by RHEED system. When Au atoms were deposited on the Si(ll1) $7\times7$ surfade, the dependence of structures and phases on the substrate temperatures and coverages was drastic. For O.1ML to 0.4ML of coverage the $7\times7$ structure changes to $7\times7$ + $5\times2$ structure as temperature increases to $350^{\circ}C$-$750^{\circ}C$. Between 0.4M1 to 1.OML the phase changed to $5 \times 2,\alpha- \sqrt{3} \times \sqrt{3},\beta- \sqrt{3} \times \sqrt{3}$ structure according to the substrate temperature and coverages. When the coverages exceeds O.SML, the 6 x 6 structure appears at the substrate temperature range between $270^{\circ}C$-$370^{\circ}C$ and compeletely transforms to 6 x6 at 1,OML. The isothermal desorption of Au on Si(ll1) surface investigated by using AES in the $\alpha- \sqrt{3} \times \sqrt{3},5 \times 2$ structures shows that the desorption energys of $\alpha- \sqrt{3} \times \sqrt{3}$ and 5 x 2 were 79Kcal/mol and 82 Kcal/mol respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3653-3659
• /
• 2009

Inter-prediction is always the main bottleneck in H.264/AVC baseline profile. This paper describes an efficient inter-prediction hardware architecture design. H.264/AVC decoder supports various block types but reference software considers only the $4{\times}4$ block when the reference block is being fetched. This causes duplicated pixels which needs extra fetch cycles. In order to eliminate some of the duplicated pixels, the $8{\times}8$ and $4{\times}4$ blocks were considered in the previous design. If the block size is larger than or equal to the $8{\times}8$ block, it will be decomposed into several $8{\times}8$ blocks and if the block size is smaller than the $8{\times}8$ block it will be decomposed into several $4{\times}4$ blocks. Comparing with the reference software, the maximum and minimum cycle reduction of the previous design are 41.5% and 28.2% respectively. For further reduction of the fetch cycles, the various block types are considered in this paper. As a result, the maximum cycle reduction is 18.6% comparing with the previous design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.561-568
• /
• 2008

STATEMENT OF PROBLEM: Currently, many implant systems are developed and divided into two types according to their joint connection: external or internal connection. Regardless of the connection type, screw loosening is the biggest problem in implant-supported restoration. PURPOSE: The purpose of this study is to assess the difference in stability of abutment screws between the external and internal hexagonal connection types under cyclic loading. MATERIAL AND METHODS: Each of the 15 samples of external implants and internal abutments were tightened to 30 N/cm with a digital torque gauge, and cemented with a hemispherical metal cap. Each unit was then mounted in a $30^{\circ}$ inclined jig. Then each group was divided into 2 sub-groups based on different periods of cyclic loading with the loading machine (30 N/ cm - 300 N/cm,14 Hz: first group $1{\times}10^6$, $5{\times}10^6$ cyclic loading; second group $3{\times}10^6$, $3{\times}10^6$ for a total cyclic loading of $6{\times}10^6$) The removal torque value of the screw before and after cyclic loading was checked. SPSS statistical software for Windows was used for statistical analysis. Group means were calculated and compared by ANOVA, independent t-test, and paired t-test with ${\alpha}$=0.05. RESULTS: In the external hexagonal connection, the difference between the removal torque value of the abutment screw before loading, the value after $1{\tims}10^6$ cyclic loading, and the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was not significant. The difference between the removal torque value after $3{\times}10^6$ cyclic loading and after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. In the internal hexagonal connection, the difference between the removal torque value before loading and the value after $1{\times}10^6$ cyclic loading was not significant, but the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was reduced and the difference was significant (P < .05). In addition, in the internal hexagonal connection, the difference between the removal torque value after $3{\times}10^6$ cyclic loading and the value after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. CONCLUSION: The external hexagonal connection was more stable than the internal hexagonal connection after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading (t = 10.834, P < .001). There was no significant difference between the two systems after $3{\times}10^6$, and additional $3{\times}10^6$ cycles.

• Korean Journal of Poultry Science
• /
• v.45 no.2
• /
• pp.73-79
• /
• 2018

The objective of this study was to calculate the unit price of an alternative feed ingredient for broiler chickens in consideration of the energy and nutritive contents in the feed ingredient by using a simple Excel worksheet. A corn-distiller's dried grains with solubles (corn-DDGS) was used as an alternative ingredient and corn and soybean meal as ingredients to be replaced. The net change of feed price was calculated based on the replacement values which were estimated in consideration of energy and nutrient concentration in feed ingredients used in the calculation, the price of feed ingredients and inclusion rate of the alternative ingredient. The nitrogen corrected apparent metabolizable energy(AMEn) and standardized ileal digestible AA including Lys, Met, Thr, and Trp, total Ca, and available P were employed as nutritive component to calculate the replacement values for individual feed ingredients. The equation for replacement was 1 ${\times}$ corn-DDGS + 0.0334 ${\times}$ soybean oil + 0.0182 ${\times}$ Limestone = 0.8893 ${\times}$ corn + 0.13 ${\times}$ soybean meal + 0.0004 ${\times}$ Lys + 0.0022 ${\times}$ Met + 0.0005 ${\times}$ Trp + 0.0028 ${\times}$ Thr + 0.0264 ${\times}$ dicalcium phosphate. The replacement price of corn-DDGS was calculated to be 270 won/kg when the inclusion rate was 15% and the energy and nutrient contents were considered in the calculation. In conclusion, the Excel-based ingredient price calculator may be useful to determine the economic value when an alternative feed ingredient is used in diets fed to broiler chickens.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.596-602
• /
• 2015

In this paper, a unified inverse transformer is designed for HEVC and VP9. The proposed architecture performs all modes of HEVC and VP9 in the unified inverser transformer, such as $4{\times}4{\sim}32{\times}32$ HEVC IDCT, $4{\times}4$ HEVC IDST, $4{\times}4{\sim}32{\times}32$ VP9 IDCT, $4{\times}4{\sim}16{\times}16$ VP9 IADST and $4{\times}4$ IWHT. Same computations are used in HEVC IDCT and VP9 IDCT, except for the scales of the coefficients. Similarly, same computations are used in HEVC $4{\times}4$ IDST and VP9 $4{\times}4$ IADST, except for the scales of the coefficients. Furthermore, HEVC IDCT, VP9 IDCT, and VP9 IADST are the subsets of upper level IDCTs. The proposed architecture reuses multipliers when the computation is identical. Also it shares adders and butterfly structures even when the multiplier coefficients are different. So it reduces the hardware size significantly. Synthesized in 0.18 um technology, the gate count is 456,442 gates. which achieved 22.6% reduction compared to conventional architectures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.15-25
• /
• 2003

An experimental. study is carried out to investigate the near-wake characteristics of an airfoil oscillating in pitch. An NACA 4412 airfoil is sinusoidally pitched about the quarter chord point between the angle of attack -6$^{\circ}$ and +6$^{\circ}$. A hot-wire anemometer is used to measure the phase-averaged mean velocities in the near-wake region of an oscillating airfoil. The freestream velocities of present work are 3.4, 12.4, 26.2 m/s, and the corresponding Reynolds numbers are 5.3${\times}10^4$, 1.9${\times}10^5$, 4.l${\times}10^5$, and the reduced frequency is 0.1. Streamwise velocity profiles are presented to show the Reynolds number effects on the near-wake region behind an airfoil oscillating in pitch. All the cases in these measurements show that the velocity defects by the change of the Reynolds number are very large at the lowest Reynolds number $R_N$=5.3${\times}10^4$: and are small at the other Reynolds numbers ($R_N$=1.9${\times}10^5$ and 4.l${\times}10^5$) in the near-wake region. A significant difference of phase-averaged mean velocity between 5.3${\times}10^4$, and 1.9${\times}10^5$ is observed. The present study shows that a critical value of Reynolds number in the near-wake of an oscillating airfoil exists in the range between 5.3${\times}10^4$, and 1.9${\times}10^5$.