• 한국전문물리치료학회지
• /
• 제8권2호
• /
• pp.41-54
• /
• 2001

Fatigue is the decline in force produced as a result of prolonged muscle activity. Localized muscle fatigue can be identified by a shift toward low in the frequency components of the EMG signal, typically represented by a fall in the median frequency. Previous studies show that a shortened muscle develops a higher fatigue than elongated muscles. The purpose of this study was to investigate the time-related change of median frequency and torque during maximal isometric back extension exercises at different exercise angles ($0^{\circ}$, $12^{\circ}$, $36^{\circ}$, $72^{\circ}$). Twenty healthy subjects (mean age = $24.35{\pm}2.70$) were evaluated in this study. Median frequency was extracted from the EMG signals by fast Fourier transform (FFT). Initial median frequency and the slope of median frequency change over time were computed from linear regression analysis. Pearson's product moment correlation was used to quantify the relationship between slope of median frequency and torque. The results were as follows: 1) Significant differences in y-intercepts of torque regression equation with respect to exercise angle were shown. However, there were no differences in the slopes of the median frequency and torque, and y intercept of the median frequency among exercise angles. 2) There was no significant correlation between slope of median frequency and torque. 3) But there was moderate correlation between median frequency and torque at each exercise angle. In conclusion, the exercise angle during maximal isometric back extension exercise is not a direct effect on slope of median frequency and torque. But results showed that median frequency and torque shift were highly correlated in all subjects.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1403-1407
• /
• 2004

Dielectric relaxation measurements on 3-nitrotoluene (3-NT) mixture of dimethylacetamide (DMA), dimethylformamide (DMF) and dimethysulphoxide (DMSO) have been carried out across the entire concentration range using Time domain reflectometry technique at 15, 25, 35 and $45^{\circ}C$ over the frequency range from 10 MHz to 20 GHz. For all the mixtures, only one dielectric loss peak was observed in this frequency range and the relaxation in these mixtures can be well described by a single relaxation time using Debye model. Bilinear calibration method is used to obtain complex permittivity ${\varepsilon}^{*}({\omega})$ from complex reflection coefficient ${\rho}^{*}({\omega})$ over frequency range 10 MHz to 20 GHz. The excess permittivity, excess inverse relaxation time, Kirkwood correlation factor, molar energy of activation are also calculated for these mixtures to study the solute-solvent interaction.

• 대한지역사회영양학회지
• /
• 제18권5호
• /
• pp.429-441
• /
• 2013

This study was conducted to examine the interrelations among snack preference, purchasing behavior and intake of fifth and sixth grade students in elementary schools in Gyeongnam province. Frequency of snack intake was the highest in those who reported 'once a day' (45.6%) snack habit. Longer-time television viewers also showed higher frequency of snack intake than shorter-time viewers. Thirty-three percent of students purchased snacks by themselves and the frequency of snack purchasing had a significant positive relationship with TV watching time (p < 0.01). The main reason, place and time of eating snacks were 'hunger' (79.2%), their home environment (50.9%) and 'after school hours' (89.7%). The favorite snack was 'ice cream' and, this snack habit was significantly different by gender of the child (p < 0.01) and TV watching time (p < 0.01). 'Milk and dairy products' scored highest (3.47) in snack intake frequency among longer-time TV viewers (> 2hr) compared to shorter-time TV viewers and this difference was statistically significant (p < 0.001). The snack preference score was correlated positively (r = 0.454) with the intake frequency for snack and its explanation power ($R^2$) was 20.5%. With regard to snack purchase behaviors, the scores of 'checking the expiration date' and 'comparing the price with similar products' were high (in what group?). Female students (p < 0.001) and shorter-time TV viewers (< 2hr) (p < 0.01) had a more reasonable purchasing behavior. The total score of preference was significantly higher (p < 0.05) in shorter-timeTV viewers (< 2hr). In the correlation between snack purchasing behaviors and intake frequency, attractiveness (r = 0.208, p < 0.001) and preference (r = 0.330, p < 0.001) showed significant positive correlations. The result of regression analysis, preference only was selected ($R^2$= 0.108).

• 한국통신학회논문지
• /
• 제37권1A호
• /
• pp.73-81
• /
• 2012

본 논문에서는 DRM(Digital Radio Mondiale) 수신기를 위한 고속 동기화 방식을 제안한다. 제안하는 방식에서는 DRM 수신기에서 요구하는 고속 수신 성능을 만족시키기 위해 기존 동기화 방식에서 수행하는 초기 샘플링 주파수 동기과정을 생략하고 정수배 주파수(Integer Frequency) 동기 및 프레임(Frame) 검출을 수행한 후, 추적(Tracking) 과정에서 샘플링 주파수 동기를 수행한다. 샘플링 주파수 옵셋(Sampling Frequency Offset)이 포함된 OFDM(Orthogonal Frequency Division Multiplexing) 복조 심볼로부터 프레임 옵셋을 추정하기 위해 참조셀(Reference cell)에 상관 기반 추정 알고리즘을 적용하고 그 성능을 분석하여 샘플링 주파수 옵셋에 강한 알고리즘을 선정한다. 제안된 구조는 DRM 수신 신호에 샘플링 주파수 옵셋이 존재하는 경우에도 초기 샘플링 주파수 동기화 과정에 소요되는 시간을 단축할 수 있으며, 참조셀간 차동 상관(Inter-cell Differential Correlation) 기법을 사용할 경우 초기 샘플링 주파수 옵셋의 영향에 강인함을 프레임 검출 모의실험을 통해 확인한다.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.71-83
• /
• 2009

숏크리트는 터널에서 적용되는 요요한 주지보재이다. 숏크리트의 품질평가는 터널의 안전한 시공과 효과적인 운영을 위한 핵심 요소이다. 숏크리트가 암반에 적절히 타설되었다 하더라도, 막장 및 벤치부에서의 발파, 수축, 지반의 변형 등으로 인해 숏크리트 균열발생 및 배면공동 등의 문제를 야기한다. 본 논문에서는 비파괴 시험인 충격 반항 기법(Impact-Echo) 및 지하레이다 탐사(GPR)를 이용하여 경임에 타설된 숏크리트 배면의 접착상태를 평가하고자 하였다. 기존의 수치해석 연구에 대한 검증과 더불어 현장 적용성에 대한 검토를 위해 실험적 연구를 수행하였다. 숏크리트의 접착상태는 완전 접착, 접착력 상실 및 공동 조건으로 구분할 수 있다. 실내 실대형 시험체에 이 세 가지 숏크리트 접착상태를 조사하였다. 충격반향시험으로부터 획득된 신호는 시간영역, 주파수 영역, 및 시간-주파수 영역에서 각각 분석되었다. 능동적 신호 처리 기법인 Short-Time Fourier Transform(STFT)을 이용하여 숏크리트 배면의 접착상태를 효과적으로 예측할 수 있었으며, 그 결과는 기존의 수치해석 연구로부터 획득한 신호특성과 잘 부합하였다. 숏크리트 배면의 접착상태가 불량할수록 다음과 같은 특징들을 나타낸다. 즉, 주파수 영역에서 자기스펙트럼밀도가 커지며, 기하학적 감쇠비는 감소하고, 시간-주파수 영역에서 윤곽선은 시간축에 평행한 형상을 나타내며, 숏크리트 두께가 얇을수록 그 공진시간이 길어진다. 또한 본 연구에서 제시한 상관계수를 이용하여 숏크리트의 접착상태를 정량적으로 평가할 수 있다. 본 연구 결과를 바탕으로 숏크리트의 접착상태를 평가할 수 있는 평가 기법 및 평가 기준을 제안하였다.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.51-63
• /
• 1995

In this paper, a new real-time optical image switching system based on the phase-typed BPEJTC is suggested. The phase filter mask which has the arbitrary position mapping function between input and output planes is constructed by using the modified JTPS of the BPEJTC. Then, the input image is convolved with this phase filter mask in the spatial frequency domain and through further Fourier transform the input image is switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switching system is opto-digitally constructed and through some experiments on image switching the possiblity of real-time implementation of the multiple optical image switching system by using the BPEJTC is suggeste.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.310-316
• /
• 2014

The location template matching(LTM) method is a technique of identifying an impact location on a structure, and requires a certain measure of similarity between two time signals. In general, the correlation coefficient is widely used as the measure of similarity, while the group delay based method is recently proposed to improve the accuracy of the impact localization. Another possible measure is the frequency response assurance criterion(FRAC), though this has not been applied yet. In this paper, these three different measures of similarity are examined comparatively by using experimental data in order to understand the properties of these measures of similarity. The comparative study shows that the correlation coefficient and the FRAC give almost the same information while the group delay based method gives the shape oriented information that is best suitable for the location template matching method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.506-511
• /
• 2014

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and requires a certain measure of similarity between two time signals. In general, the correlation coefficient is widely used as the measure of similarity, while the group delay based method is recently proposed to improve the accuracy of the impact localization. Another possible measure is the frequency response assurance criterion (FRAC), though this has not been applied yet. In this paper, these three different measures of similarity are examined comparatively by using experimental data in order to understand the properties of these measures of similarity. The comparative study shows that the correlation coefficient and the FRAC give almost the same information while the group delay based method gives the shape oriented information that is best suitable for the location template matching method.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.119-121
• /
• 2005

This paper aims to estimate the delay time of multiple signals in a multi-path environment. It also seeks to carry out a comparative analysis with the existing delay time under the proposed algorithm to develop a new algorithm that applies the space average method in a MUSIC algorithm. Unlike the existing delay time estimation algorithm, the developed algorithm was able to estimate the delay time in 5ns low. Therefore, the algorithm proposed in this paper improved the existing delay time estimated algorithm.

• Smart Structures and Systems
• /
• 제1권2호
• /
• pp.185-215
• /
• 2005

Advanced signal processing techniques have been long introduced and widely used in structural health monitoring (SHM) and nondestructive evaluation (NDE). In our research, we applied several signal processing approaches for our embedded ultrasonic structural radar (EUSR) system to obtain improved damage detection results. The EUSR algorithm was developed to detect defects within a large area of a thin-plate specimen using a piezoelectric wafer active sensor (PWAS) array. In the EUSR, the discrete wavelet transform (DWT) was first applied for signal de-noising. Secondly, after constructing the EUSR data, the short-time Fourier transform (STFT) and continuous wavelet transform (CWT) were used for the time-frequency analysis. Then the results were compared thereafter. We eventually chose continuous wavelet transform to filter out from the original signal the component with the excitation signal's frequency. Third, cross correlation method and Hilbert transform were applied to A-scan signals to extract the time of flight (TOF) of the wave packets from the crack. Finally, the Hilbert transform was again applied to the EUSR data to extract the envelopes for final inspection result visualization. The EUSR system was implemented in LabVIEW. Several laboratory experiments have been conducted and have verified that, with the advanced signal processing approaches, the EUSR has enhanced damage detection ability.