• Title/Summary/Keyword: Time-efficiency

검색결과 11,910건 처리시간 0.036초

5세대 이동통신을 위한 후보 변조기술들의 시간과 주파수 자원 비교 분석 (Comparison Analysis of Time and Frequency Resource of Candidate Waveforms for 5G Mobile Communications)

  • 안창영;유흥균
    • 한국전자파학회논문지
    • /
    • 제27권11호
    • /
    • pp.987-995
    • /
    • 2016
  • 5세대 이동통신을 위한 후보변조기술에서 중요한 평가 요인 중 하나는 OOB(Out of Band) 전력 저감을 통한 주파수 효율 향상 특성이다. 본 논문에서는 5세대 이동통신을 위한 후보변조기술로 주목받고 있는 UFMC(Universal Filtered Multi-Carrier), FBMC(Filter Bank Multi-Carrier), W-OFDM(Weighted Orthogonal Frequency Division Multiplexing) 시스템에 대한 시간 자원 할당에 대한 주파수 자원의 효율을 평가하고 비교 분석한다. 시뮬레이션을 통해 시간 자원 할당에 대한 스펙트럼 효율 향상 특성을 확인하였으며, 추가적으로 확보할 수 있는 주파수 자원을 확인하였다. 본 논문에서는 동일한 데이터 비트를 전송하며, 4개의 심볼을 전송하는 조건에서, 시스템이 선형일 때, 각 시스템은 모두 유사한 시간-주파수 자원 활용 효율을 보이나, 비선형 조건에서는 FBMC의 시간-주파수 자원 활용 효율이 가장 크게 저하되는 것을 확인하였다.

DEA를 이용한 기업의 Business Intelligence 시스템 도입 효율성에 대한 비교 평가 연구 (The Efficiency Analysis of Firms Having Established a Business Intelligence System Using DEA/Time-Window Analysis)

  • 백성현;박광호;김태영
    • 경영정보학연구
    • /
    • 제17권3호
    • /
    • pp.113-133
    • /
    • 2015
  • 본 논문은 BI 시스템을 도입하여 사용하고 있는 기업들을 'IT통신 업종', '전기전자 업종', '에너지 화학 업종', '자동차 기계 장비 업종', '식품 소비재 업종' 과 같이 5개 산업 업종으로 구분 하여 BI 시스템을 도입한 기업의 효율성을 DEA 기법의 CCR 모형과 BCC 모형을 활용하여 평가하였으며, 특히 Time-Window 기법을 적용하여 BI 도입 후 기간별로 효율성의 변화 추이를 분석하였다. 즉 BI 시스템을 도입한 기업들의 상대적인 효율성을 비교하여 순위를 매기고, 분석 시 BI 도입 시점으로부터 시간이 흐른 것을 토대로 비교 평가하는 Time Window 기법을 활용하여 BI를 도입한 지 오래된 기업과 그렇지 않은 기업을 차별화하여 의미 분석하였다. 분석 결과는 에너지 화학 산업에서 BI 도입 후 효율성 제고가 두드러졌고 전기 전자 산업의 효율성이 꾸준히 안정화되어 가고 있는 것으로 분석되었다.

물고기형 수중로봇의 유영메커니즘 및 알고리즘 개발(1) (Development of Swimming Mechanism and Algorithm for Fish-Type Underwater Robot(1))

  • 류영선
    • 로봇학회논문지
    • /
    • 제4권1호
    • /
    • pp.43-48
    • /
    • 2009
  • Generally, underwater vehicle type of propeller shows low efficiency about 50%-55%. However, the efficiency of swimming mechanism of a fish is 60%-70%, more efficient about 20% than screw propellers. Recently, research of underwater vehicle type of fish increase due to its good efficiency and is regarded as a typical bio-mimical robot. In this research, a new algorithm and mechanism that show low energy consumption imitating swimming mechanism of fish proposed increasing speed and running time in field trial.

  • PDF

다단오존접촉조에서 유해화학물질의 제거특성 (Removal Characteristics of Hazard Organic Substances in the Multi-stage Ozone Contactor)

  • 박영규
    • 환경위생공학
    • /
    • 제14권4호
    • /
    • pp.41-49
    • /
    • 1999
  • The water treatment by was performed to remove VOC and organic substances in the multi-stage ozone contactor. Ozone is mainly utilized to change the chemical structures of organic substance, of which finally has the purpose to degrad them. The removal efficiency of VOC has 20~60% at the ozone concentration of 3 ppm, in case of trichloroethylene, its efficiency is reduced by 85% at the ozone contact time of 8 min. Design factors such as the number of stage, ozone concentration, zone contact time are determined for optimal treatment in the multi-stage contactor.

  • PDF

Development of a variable resistance-capacitance model with time delay for urea-SCR system

  • Feng, Tan;Lu, Lin
    • Environmental Engineering Research
    • /
    • 제20권2호
    • /
    • pp.155-161
    • /
    • 2015
  • Experimental research shows that the nitric oxides ($NO_X$) concentration track at the outlet of selective catalytic reduction (SCR) catalyst with a transient variation of Adblue dosage has a time delay and it features a characteristic of resistance-capacitance (RC). The phenomenon brings obstacles to get the simultaneously $NO_X$ expected to be reduced and equi-molar ammonia available to SCR reaction, which finally inhibits $NO_X$ conversion efficiency. Generally, engine loads change frequently, which triggers a rapid changing of Adblue dosage, and it aggravates the air quality that are caused by $NO_X$ emission and ammonia slip. In order to increase the conversion efficiency of $NO_X$ and avoid secondary pollution, the paper gives a comprehensive analysis of the SCR system and tells readers the key factors that affect time delay and RC characteristics. Accordingly, a map of time delay is established and a solution method for time constant and proportional constant is carried out. Finally, the paper accurately describes the input-output state relation of SCR system by using "variable RC model with time delay". The model can be used for a real-time correction of Adblue dosage, which can increase the conversion efficiency of $NO_X$ in SCR system and avoid secondary pollution forming. Obviously, the results of the work discover an avenue for the SCR control strategy.

SBR에서 아세트산을 이용한 양돈폐수의 질소·인 제거 특성 (Removal Characteristics of Nitrogen and Phosphorus in swine wastewater by Using Acetic acid on the SBR Process)

  • 허목;강진영
    • 유기물자원화
    • /
    • 제12권1호
    • /
    • pp.84-93
    • /
    • 2004
  • 본 연구는 생물학적 처리공정의 하나인 SBR을 이용하여, 양돈폐수중의 유기물과 질소, 인의 동시 제거를 목적으로 적정의 수리학적 체류시간(HRT)과 반응기간 중 교반/폭기 시간비(M/A) 및 적정의 교반/폭기 시간비에서의 외부탄소원의 주입기간(Injection Time)에 따른 변화에 따른 실험 결과로부터 다음과 같은 결론을 얻었다. (1) $NH_4{^+}-N$의 제거효율은 M/A가 0.0/22.0일 때(Run 1) 가장 효율이 좋았으며, 외부탄 소원을 주입했을 경우 탈질균의 증식으로 인해서 질산화가 잘 이루어지지 않기 때문에 주입시간이 길어질수록 증가하였다. T-N의 제거효율은 M/A가 증가할수록, 외부탄소원 주입시간이 길어질수록 증가하였다. (2) T-P의 제거효율은 운전조건에 따라 큰 차이를 보이고 있으며, M/A가 증가할수록 제거효율은 증가하였으며, 외부탄소원의 주입기간을 두고 보았을때, 주입기간을 짧게 할 경우 탈질균의 증식으로 인해서 탈질이 더 효율적으로 이루어지기 때문에 그 제거효율은 증가하였다. (3) 총 반응시간 22시간 중 M/A 16.5/5.5, 무산소 기간의 16.5시간 중 15시간동안 외부탄소원을 주입했을 경우(Run 4-1)의 운전조건에서 유기물 및 질소 제거에 가장 효율적이었다. 각각의 효율을 살펴보면, $COD_{Cr}$, $COD_{Mn}$ 그리고 $BOD_5$인 경우, 각각 90.6%, 87.7% 그리고 96.1%이고, T-N의 경우 86.6%, T-P인 경우는 84.5%로 나타났다.

  • PDF

보장구획의 장단변화에 따른 경운기의 기종별 이경작업 효력에 관한 연구 (studdyon the Field Efficiency of the Plowing Operation of the Power Tillers in accordance withthe Various Field Dimensions.)

  • 최규홍;김종관
    • Journal of Biosystems Engineering
    • /
    • 제2권1호
    • /
    • pp.49-54
    • /
    • 1977
  • In order to obtain the field efficiency of the power tiller plowing on the various size of and its length-width field tests were performed with 8ps.10ps. power tiller popularly used in the korean rural area, and Satoh 5ps. made in Japan, Land Master 5ps. made in England were tested to compare with the field efficiency of the above power tillers. The results obtained in this tests were as follows ; 1. In considering of the resting time and the refueling time and others, the field efficiency of Satoh was the highest among the power tillers as to be 80%, at the 8ps. power tiller 76.5%, at the 10ps. power tiller 79.3% and the lowest field efficiency was obtained at the Land Master as 75.7%. 2. The field efficiency of the each power tiller increased as the ratio of the length to width of the field was increased. 3. The increasing rate of field efficiency was much bigger in the below the ratio of 5 : 1 but at the upper ratio increased above, the ratio was nearly constant. 4. The field efficiency of the power tiller was higher at the smaller power tiller than the larger, except the Land Master , because of easily operating and turning of the power tiller by virtue of its lighter weight.

  • PDF

음식물류폐기물의 성상별 온도변화에 따른 혐기성소화 효율 비교 연구 (Comparison of Anaerobic Digestion Efficiency with Different Temperature of Food Wastes)

  • 황광현;김동익
    • 한국물환경학회지
    • /
    • 제35권4호
    • /
    • pp.332-339
    • /
    • 2019
  • A comparative study on the anaerobic digestion efficiency according to the temperature change was conducted considering the characteristics of domestic food wastes with high water content of about 80 % or more. The substrate was tested for anaerobic digestion efficiency in two substrates, a liquid component separated naturally from food waste and food waste itself. In the anaerobic digestion experiments, the digestion efficiency was the highest at $55^{\circ}C$ (thermophilic temperature). However, the digestion efficiency at $45^{\circ}C$(middle high temperature) was lower than that at $35^{\circ}C$(mesophilic temperature). The comparison of general food wastes anaerobic digestion requiring 30 days of hydraulic retention time to the liquid component indicated a stable digestion efficiency even after 15 days of hydraulic retention time.In the experiments conducted on food waste, the digestion efficiency at $55^{\circ}C$ was higher than that at $35^{\circ}C$. When the food waste, especially the liquid component originating from food waste, is treated by anaerobic digestion method, the mesophilic temperature and thermophilic temperature conditions are more favorable in the digestion efficiency than the middle high temperature ($45^{\circ}C$). However, when applying thermophilic or mesophilic temperature anaerobic digestion process operation in the field, the amount of energy input should be considered.

최종관입량을 기준으로 한 합리적인 말뚝 시공관리 방안 (A new proposal for the appropriate quality control of driven piles by using set values)

  • 이명환;홍헌성;김성회;전영석
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 말뚝기초 학술발표회
    • /
    • pp.51-63
    • /
    • 2000
  • Because of simplicity and easiness, dynamic pile driving formulae have long been used by most of the field engineers for pile quality control purposes. Yet their reliability have been repeatedly reported unsuitable and the results can lead to significant errors. According to the research results by the authors, the two most important sources of unreliability of dynamic pile driving formulae are uncertainty in the estimation of hammer efficiency and time dependent characteristics of pile bearing capacity. Based on this finding a new method is proposed. By using the actual value of hammer efficiency the pile bearing capacity at the time of driving could be reasonably estimated. By performing restrike test sometime after pile installation, time effect coefficient could be determined. The effectiveness of the proposed method was proven in the actual construction project.

  • PDF

배·급수계통에서 유리염소와 클로라민의 소독효과에 관한 비교연구 (Comparative Study on Disinfection Efficiency of Chlorine and Chloramine in the Distribution Systems)

  • 최용일;남상호
    • 상하수도학회지
    • /
    • 제13권2호
    • /
    • pp.82-88
    • /
    • 1999
  • This study was to evaluate disinfection efficiency of chlorine and chloramine as secondary disinfectants in the distribution systems. Indicator organism, HPC in the suspended and attached were measured for copper, galvanized steel, PVC, and carbon steel pipes. For suspended microorganism, the PVC pipe was markedly dense among the assessed pipe materials. The attached microorganism was markedly equivalent roughness of pipe materials. In copper and galvanized pipes, chloramine was more effective that free chlorine to disinfect suspended microorganism in the contact time of 2 hours. The contact time for the 99% inactivation of suspended microorganism by chloramine was longer than that of free chlorine. Regardless of pipe materials, chloramine was effective on both disinfection efficiency and 99% inactivation time for attached microorganism. In conclusion, chloramine which is good disinfectant for long contact time was recommended as secondary disinfectant in distribution system.

  • PDF