• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.458-467
• /
• 2010

In this paper, a new audio reproduction system was developed in which the cross-talk signals would be reasonably cancelled at an arbitrary listener position. To adaptively remove the cross-talk signals according to the listener's position, a method of tracking the listener position was employed. This was achieved using the two microphones, where the listener direction was estimated using the time-delay between the two signals from the two microphones, respectively. Moreover, room reverberation effects were taken into consideration where linear prediction analysis was involved. To remove the cross-talk signals at the left-and right-ears, the paths between the sources and the ears were represented using the KEMAR head-related transfer functions (HRTFs) which were measured from the artificial dummy head. To evaluate the usefulness of the proposed listener tracking system, the performance of cross-talk cancellation was evaluated at the estimated listener positions. The performance was evaluated in terms of the channel separation ration (CSR), a -10 dB of CSR was experimentally achieved although the listener positions were more or less deviated. A real-time system was implemented using a floating-point digital signal processor (DSP). It was confirmed that the average errors of the listener direction was 5 degree and the subjects indicated that 80 % of the stimuli was perceived as the correct directions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.27-38
• /
• 2006

The main purpose of rate control is to achieve the highest video quality when bandwidth or storage capacity is limited. For this purpose, we need a rate control algorithm which is adaptively controlled by the motion information of sequences, scene change, buffer capacity and time-varing bandwitdh channels. A rate-control method in the encoder requires the accurate estimation of target bit for each frame and the low end-to-end delay for transmitting video data by intelligent selection of encoding parameters. In this paper, we suggest three kinds of linear relation in the encoder to satisfy the characteristics of rate control. The first relation is that between the percentage of zero quantized transformed coefficients(p) and coded bits. Second relation is that between the PSNR of encoded frame and its Quantization parameter(QP). Finally, we can find out a linear approximation between QP and p. According to the experimental analysis, the proposed method results in an efficient rate control in terms of the bit estimation, the buffer capacity, and PSNR compared with the existing rate control in the H.264 JM 9.3.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.567-578
• /
• 2014

The study suggested a method to improve analysis accuracy such that the interactive effects of transportation changes between outside and inside of sub-areas were sequentially considered in the analysis by linking a macroscopic network analysis and a microscopic traffic simulation. A dynamic O/D estimation method was developed for practical implement of sub-area microscopic simulation analysis by using the results of macroscopic network analysis, the results of selected link analysis at the cordon line of the sub-area, departure time data of household travel survey, timely observed traffic volume data at the cordon. This estimated dynamic O/D for the sub-area made it possible to analyze traffic phenomena in details. Various detailed phenomena such as traffic queues, delay at intersection, and conflicts between vehicles, which is impossible to be grasped through a macroscopic analysis, can be analyzed with the dynamic microscopic traffic analysis. Through implementing an empirical study and validation, the study provided a reference result about accuracy of a microscopic traffic simulation of a sub-area to help its application for real transportation policy analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1093-1098
• /
• 2013

A single-crystal sapphire is used as a transparent bulletproof window material; however, few studies have investigated the dynamic behavior and fracture properties under high-speed impact. High-speed and high-resolution sequential images are required to study the interaction of the bullet with the brittle ceramic materials. In this study, a device is developed to capture the sequence of high-speed impact/penetration phenomena. This system consists of a speed measurement device, a microprocessor-based camera controller, and multiple CCD cameras. By using a linear array sensor, the speed-measuring device can measure a small (diameter: up to 1 2 mm) and fast (speed: up to Mach 3) bullet. Once a bullet is launched, it passes through the speed measurement device where its time and speed is recorded, and then, the camera controller computes the exact time of arrival to the target during flight. Then, it sends the trigger signal to the cameras and flashes with a specific delay to capture the impact images sequentially. It is almost impossible to capture high-speed images without the estimation of the time of arrival. We were able to capture high-speed images using the new system with precise accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.566-572
• /
• 2021

A methodology for the identification and coordinates estimation of air cavities under urban ground or sandy soil using its natural poles and natural resonant frequencies is presented. The potential of this methodology was analyzed. Simulation models of PEC (Perfect Electric Conductor)s with various shapes and dimensions were developed using an EM (Electromagnetic) simulator. The Cauchy method was applied to the obtained EM scattering response of various objects from EM simulation models. The natural poles of objects corresponding to its instinct characterization were then extracted. Thus, a library of poles can be generated using their natural poles. The generated library of poles provided the possibility of identifying a target by comparing them with the computed natural poles from a target. The simulation models were made assuming that there is an air cavity under urban ground or sandy soil. The response of the desired target was extracted from the electromagnetic wave scattering data from its simulation model. The coordinates of the target were estimated using the time delay of the impulse response (peak of the impulse response) in the time domain. The MP (Matrix Pencil) method was applied to extract the natural poles of a target. Finally, a 0.2-m-diameter spherical air cavity underground could be estimated by comparing both the pole library of the objects and the calculated natural poles and the natural resonant frequency of the target. The computed location (depth) of a target showed an accuracy of approximately 84 to 93%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.85-96
• /
• 2004

The study begin with a basic concept, if the occupancy length of vehicle detector is directly proportional to the delay of vehicle. That is, it analogize vehicle's delay of a occupancy time. The results of a study was far superior in the estimation of a queue length. It is a very good points the operator is not necessary to optimize s1, s2, Thdoc. Thdoc(critical congestion degree) replaced 0.7 with 0.2 - 0.3. But, if vehicles have been experience in delay was not occupy vehicle detector, the study is in existence some problems. In conclusion, it is necessary that stretch queue detector or install paired queue detector. Also I want to be made steady progress a following study relation to this study, because it is required traffic signal control on congestion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.104-111
• /
• 2018

The sensorless control of high efficiency air compressors using a permanent magnet type synchronous motor as an oil-free air compressor is quite common. However, due to the nature of the air compressor, it is difficult to install a position sensor. In order to control the permanent magnet type synchronous motor at variable speed, the inclusion of a position sensor to grasp the position of the rotor is essential. Therefore, in order to achieve sensorless control, it is essential to use a permanent magnet type synchronous motor in the compressor. The position estimation method based on the back electromotive force, which is widely used as the sensorless control method, has a limitation in that position errors occur due either to the phase delay caused by the use of a stationary coordinate system or to the estimated back electromotive force in the transient state caused by the use of a synchronous coordinate system. Therefore, in this paper, we propose a method of estimating the position and velocity using a rotation angle tracking observer and reducing the speed ripple through a disturbance observer. An experimental apparatus was constructed using Freescale's MPU and the feasibility of the proposed algorithm was examined. It was confirmed that even if a position error occurs at a certain point in time, the position correction value converges to the actual vector position when the position error value is found.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.65-83
• /
• 1993

The purpose of this study is estimate limits of Korean life expectancy at birth by 'Gompertz growth curse Model', 'Cause-Elimination Model' and Multidimensional models of Senescencee and Mortality'. Data used in Gompertz curve were obtained from all life tables published from 1905 to 1990 in Korea, and life expectancies at birth of eighteen groups were selected at five-year interval in consideration of time-series changes. Data used in Cause-Elimination Model are 'Cause of Death statistics in 1991' published in 1992 by National Bureau of Statistics of Korea and 'life table of 1989' published in 1990 by National Bureau of Statistics, Economic Planning Board of Korea. The materials are all classifiable death data, 119, 253 cases of male and 82, 420 cases of female, which is from 1991 Causes of Death statistics. The cases of death analyzed belong to one of 8 categories; i.e., Infectious and Parasitic Diseases(001-139; with notation of Infectious Diseases), Malignant Neoplasms(140-208), Hypertensive Diseases(401-405), Ischemic Heart Dieases and Diseases of Pulmonary Circulation and Other Forms of Heart Diseases(410-429;with notation of Heart Disease), Cerebrovascular Diseases(430-438), Chronic Liver Diseases and Cirrhosis(571; with notation of Liver Diseases), Injury and Poisoning(800-999) and all other disease. Data used in 'Multidimensional models of senescence and mortality' were life table of 1989 published by National Bureau of statistics, Economic Planning Board of Korea and life table of 1970, 1978-79, 1983, 1985 and 1987. The major findings may be summarised as follows: 1. Estimate equations of Gompertz growth curve using life expectancy at birth during the 1905-1990 period are as the following. Male : y = 88.047697 $\times$ $0.199690^{0.903381x}$ Female : y = 95.632828 $\times$ $0.199690^{0.903381x}$ Limits of life expectancy at birth, which were estimated by Gompertz growth curve, are 88.05 for male and 95.63 for female. 2. The effect on life expectancy at birth eliminationg all causes death is 14.04 years(for male) and 10.86 years(for female). Astonishingly, eliminating the malignant neoplasms increase life expectancy at birth by 2.85 years for male 2.03 years for female in 1991. In table 8 we show the effect on life expectancy at birth of separately eliminating each of the 8 categorical causes of death. The theoretical limit to life expectancy by Cause-Elimination Model is 80.96 for male and 85.82 for female. 3. If the same rate of delay [0.376 year(male), 0.435 year(femable) per calendar year] continued, then life expectancy at birth would reach 74.82(male) years and 84, 10(female) years in 2010. With 14.04-years(male) and 10.86-years(female) effect attributable in 2010 would be 88.86 years(male) and 94.96(femable) years. 4. 'Multidimensional models of senescence and death' permits calculations of the value of the attribution coefficient (B), percent of loss per year of physiologic function. The results of Ro and B during the 1970-1989 period are listed in table 9. Estimate of limit to Korean life expectancy at birth by 'Multidimensional models of senescence and death' is 99.47 years for male and 104.74 years for female in 1989.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.231-241
• /
• 2014

Recently, single channel seismic survey for engineering purpose have been used widely taking advantage of simple processing. However it is very difficult to obtain high fidelity subsurface image by single channel seismic due to insufficient fold coverage. Recently, seismic waveform inversion in multi channel seismic survey is utilized for accurate subsurface imaging even in complex terrains. In this paper, we propose the seismic waveform inversion algorithm for velocity model building using a single channel seismic data. We utilize the Gauss-Newton method and assume that subsurface model is 1-Dimensional. Seismic source estimation technique is used and offset effect is also corrected by removing delay time by offset. Proposed algorithm is verified by applying modified Marmousi2 model, and applied to field data set obtained in port of Busan.

• Research in Community and Public Health Nursing
• /
• v.14 no.1
• /
• pp.106-119
• /
• 2003

This study was executed to develop the model of the format of the day care center which supplies the total service on the health care in the day time and social program related with the work and to evaluate the processing courses which was adjusted for 3 years from March 1999 to December 2001 in order to improve the quality of life of the family who experience dementia, dementia prevention, and the old and the burden of daily activities. The processing courses of this business model were evaluated to the confirmation on the health condition, application of the nursing processes, and the precise medical examination, and 20 sorts of social programs. The methods used in this model were the simplified MMSE-K, Ability for ,Daily Life(ADL), Instrumental Activities of Daily Living(IADL), and nursing process, and so on. The execution effects of this model are as follows. 1. It can contribute to the delay in the dementia process of the old people who are related with the dementia and maintenance and improvement of the health by confirming the stopping of the process of the dementia as the objective estimation method while the dementia symptom is maintained as the current condition through the medical and social total services. 2. The reduction of the burden for the daily care of the subject people and their families for the old people who are concerned with the dementia helped to improve the quality of life of the subject people and their family by enabling them to have jobs. 3. It enabled them to positively cope with the demand for the health and nursing of the local residents related to the old people. 4. It enabled them to enhance the recognition for the socialization of the local social organization and residents for the old people. 5. It enabled them to reinforce the related system among the local social organizations, and develop and provide the various social programs which are proper for the old people.